Support for Asmax AR 1004g router
Signed-off-by: Adrian Feliks <[email protected]>
---
Index: target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
===================================================================
--- target/linux/brcm63xx/base-files/etc/uci-defaults/02_network (wersja
38876)
+++ target/linux/brcm63xx/base-files/etc/uci-defaults/02_network (kopia
robocza)
@@ -28,6 +28,7 @@
96338W2_E7T |\
96348A-122 |\
96348W3 |\
+AR1004G |\
CPVA642 |\
CT536_CT5621 |\
CT6373-1 |\
Index: target/linux/brcm63xx/base-files/lib/brcm63xx.sh
===================================================================
--- target/linux/brcm63xx/base-files/lib/brcm63xx.sh (wersja 38876)
+++ target/linux/brcm63xx/base-files/lib/brcm63xx.sh (kopia robocza)
@@ -57,6 +57,10 @@
brcm63xx_has_reset_button="true"
ifname=eth1
;;
+ AR1004G)
+ status_led="AR1004G:green:power"
+ brcm63xx_has_reset_button="true"
+ ;;
CVG834G_E15R3921)
status_led="CVG834G:green:power"
ifname=eth0
Index: target/linux/brcm63xx/image/Makefile
===================================================================
--- target/linux/brcm63xx/image/Makefile (wersja 38876)
+++ target/linux/brcm63xx/image/Makefile (kopia robocza)
@@ -190,6 +190,8 @@
$(call Image/Build/CFE,$(1),96368MVNgr,6368,96368MVNgr-generic)
$(call Image/Build/CFE,$(1),96368MVWG,6368,96368MVWG-generic)
+ # Asmax AR 1004g
+ $(call Image/Build/CFEFIXUP,$(1),96348GW-10,AR1004G,6348,AR1004G)
# BT Voyager V210_BTR
$(call Image/Build/CFE,$(1),V210_BB,6348,BTV210_BTR,,--layoutver 5)
# BT Voyager V210_ROI, V210_WB
Index: target/linux/brcm63xx/patches-3.10/555-board_AR1004G.patch
===================================================================
--- target/linux/brcm63xx/patches-3.10/555-board_AR1004G.patch (wersja 0)
+++ target/linux/brcm63xx/patches-3.10/555-board_AR1004G.patch (kopia robocza)
@@ -0,0 +1,62 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1915,6 +1915,51 @@ static struct board_info __initdata boar
+ },
+ };
+
++static struct board_info __initdata board_96348gw_10_AR1004G = {
++ .name = "AR1004G",
++ .expected_cpu_id = 0x6348,
++
++ .has_uart0 = 1,
++ .has_enet1 = 1,
++ .has_pci = 1,
++
++ .enet1 = {
++ .has_phy = 1,
++ .phy_id = 0,
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++
++ .leds = {
++ {
++ .name = "AR1004G:green:inet",
++ .gpio = 3,
++ .active_low = 1,
++ },
++ {
++ .name = "AR1004G:green:power",
++ .gpio = 0,
++ .active_low = 1,
++ },
++ {
++ .name = "AR1004G:red:power",
++ .gpio = 6,
++ .active_low = 1,
++ },
++ },
++
++ .buttons = {
++ {
++ .desc = "reset",
++ .gpio = 33,
++ .active_low = 1,
++ .type = EV_KEY,
++ .code = KEY_RESTART,
++ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++ },
++ },
++};
++
+ #endif
+
+ /*
+@@ -4075,6 +4120,7 @@ static const struct board_info __initcon
+ &board_96348A_122,
+ &board_CPVA502plus,
+ &board_96348W3,
++ &board_96348gw_10_AR1004G,
+ #endif
+
+ #ifdef CONFIG_BCM63XX_CPU_6358
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
