Signed-off-by: Felix Kaechele <[email protected]> --- target/linux/ar71xx/config-3.10 | 1 + .../ar71xx/files/arch/mips/ath79/mach-mynet-n750.c | 196 +++++++++++++++++++++ .../610-MIPS-ath79-openwrt-machines.patch | 85 +++++---- 3 files changed, 245 insertions(+), 37 deletions(-) create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-n750.c
diff --git a/target/linux/ar71xx/config-3.10 b/target/linux/ar71xx/config-3.10 index f832323..2d6f404 100644 --- a/target/linux/ar71xx/config-3.10 +++ b/target/linux/ar71xx/config-3.10 @@ -52,6 +52,7 @@ CONFIG_ATH79_MACH_JA76PF=y CONFIG_ATH79_MACH_JWAP003=y CONFIG_ATH79_MACH_MR600=y CONFIG_ATH79_MACH_MYNET_N600=y +CONFIG_ATH79_MACH_MYNET_N750=y CONFIG_ATH79_MACH_MYNET_REXT=y CONFIG_ATH79_MACH_MZK_W04NU=y CONFIG_ATH79_MACH_MZK_W300NH=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-n750.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-n750.c new file mode 100644 index 0000000..60f68cd --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-n750.c @@ -0,0 +1,196 @@ +/* + * WD My Net N750 board support + * + * Copyright (C) 2013 Felix Kaechele <[email protected]> + * Copyright (C) 2013 Gabor Juhos <[email protected]> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/pci.h> +#include <linux/phy.h> +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/ath9k_platform.h> +#include <linux/ar8216_platform.h> + +#include <asm/mach-ath79/ar71xx_regs.h> + +#include "common.h" +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-spi.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" +#include "nvram.h" + + +/* + * Taken from GPL bootloader source: + * board/ar7240/db12x/alpha_gpio.c + */ +#define MYNET_N750_GPIO_LED_WIFI 11 +#define MYNET_N750_GPIO_LED_INTERNET 12 +#define MYNET_N750_GPIO_LED_WPS 13 +#define MYNET_N750_GPIO_LED_POWER 14 + +#define MYNET_N750_GPIO_BTN_RESET 17 +#define MYNET_N750_GPIO_BTN_WPS 19 + +#define MYNET_N750_GPIO_EXTERNAL_LNA0 15 +#define MYNET_N750_GPIO_EXTERNAL_LNA1 18 + +#define MYNET_N750_KEYS_POLL_INTERVAL 20 /* msecs */ +#define MYNET_N750_KEYS_DEBOUNCE_INTERVAL (3 * MYNET_N750_KEYS_POLL_INTERVAL) + +#define MYNET_N750_WMAC_CALDATA_OFFSET 0x1000 +#define MYNET_N750_PCIE_CALDATA_OFFSET 0x5000 + +#define MYNET_N750_NVRAM_ADDR 0x1f058010 +#define MYNET_N750_NVRAM_SIZE 0x7ff0 + +static struct gpio_led mynet_n750_leds_gpio[] __initdata = { + { + .name = "wd:blue:power", + .gpio = MYNET_N750_GPIO_LED_POWER, + .active_low = 0, + }, + { + .name = "wd:blue:wps", + .gpio = MYNET_N750_GPIO_LED_WPS, + .active_low = 0, + }, + { + .name = "wd:blue:wireless", + .gpio = MYNET_N750_GPIO_LED_WIFI, + .active_low = 0, + }, + { + .name = "wd:blue:internet", + .gpio = MYNET_N750_GPIO_LED_INTERNET, + .active_low = 0, + }, +}; + +static struct gpio_keys_button mynet_n750_gpio_keys[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = MYNET_N750_KEYS_DEBOUNCE_INTERVAL, + .gpio = MYNET_N750_GPIO_BTN_RESET, + .active_low = 1, + }, + { + .desc = "WPS button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = MYNET_N750_KEYS_DEBOUNCE_INTERVAL, + .gpio = MYNET_N750_GPIO_BTN_WPS, + .active_low = 1, + }, +}; + +static struct ar8327_pad_cfg mynet_n750_ar8327_pad0_cfg = { + .mode = AR8327_PAD_MAC_RGMII, + .txclk_delay_en = true, + .rxclk_delay_en = true, + .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, + .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, +}; + +static struct ar8327_led_cfg mynet_n750_ar8327_led_cfg = { + .led_ctrl0 = 0xc737c737, + .led_ctrl1 = 0x00000000, + .led_ctrl2 = 0x00000000, + .led_ctrl3 = 0x0030c300, + .open_drain = false, +}; + +static struct ar8327_platform_data mynet_n750_ar8327_data = { + .pad0_cfg = &mynet_n750_ar8327_pad0_cfg, + .port0_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, + }, + .led_cfg = &mynet_n750_ar8327_led_cfg, +}; + +static struct mdio_board_info mynet_n750_mdio0_info[] = { + { + .bus_id = "ag71xx-mdio.0", + .phy_addr = 0, + .platform_data = &mynet_n750_ar8327_data, + }, +}; + +static void mynet_n750_get_mac(const char *name, char *mac) +{ + u8 *nvram = (u8 *) KSEG1ADDR(MYNET_N750_NVRAM_ADDR); + int err; + + err = ath79_nvram_parse_mac_addr(nvram, MYNET_N750_NVRAM_SIZE, + name, mac); + if (err) + pr_err("no MAC address found for %s\n", name); +} + +static void __init mynet_n750_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + u8 tmpmac[ETH_ALEN]; + + ath79_register_m25p80(NULL); + ath79_register_leds_gpio(-1, ARRAY_SIZE(mynet_n750_leds_gpio), + mynet_n750_leds_gpio); + ath79_register_gpio_keys_polled(-1, MYNET_N750_KEYS_POLL_INTERVAL, + ARRAY_SIZE(mynet_n750_gpio_keys), + mynet_n750_gpio_keys); + /* + * Control signal for external LNAs 0 and 1 + * Taken from GPL bootloader source: + * board/ar7240/db12x/alpha_gpio.c + */ + gpio_request_one(MYNET_N750_GPIO_EXTERNAL_LNA0, + GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, + "External LNA0"); + gpio_request_one(MYNET_N750_GPIO_EXTERNAL_LNA1, + GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, + "External LNA1"); + + mynet_n750_get_mac("wlan24mac=", tmpmac); + ath79_register_wmac(art + MYNET_N750_WMAC_CALDATA_OFFSET, tmpmac); + + mynet_n750_get_mac("wlan5mac=", tmpmac); + ap91_pci_init(art + MYNET_N750_PCIE_CALDATA_OFFSET, tmpmac); + + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); + + mdiobus_register_board_info(mynet_n750_mdio0_info, + ARRAY_SIZE(mynet_n750_mdio0_info)); + + ath79_register_mdio(0, 0x0); + + mynet_n750_get_mac("lanmac=", ath79_eth0_data.mac_addr); + + /* GMAC0 is connected to an AR8327N switch */ + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = BIT(0); + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + ath79_eth0_pll_data.pll_1000 = 0x06000000; + ath79_register_eth(0); + + ath79_register_usb(); +} + +MIPS_MACHINE(ATH79_MACH_MYNET_N750, "MYNET-N750", "WD My Net N750", + mynet_n750_setup); diff --git a/target/linux/ar71xx/patches-3.10/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.10/610-MIPS-ath79-openwrt-machines.patch index 52d5794..da7d133 100644 --- a/target/linux/ar71xx/patches-3.10/610-MIPS-ath79-openwrt-machines.patch +++ b/target/linux/ar71xx/patches-3.10/610-MIPS-ath79-openwrt-machines.patch @@ -1,6 +1,6 @@ --- a/arch/mips/ath79/machtypes.h +++ b/arch/mips/ath79/machtypes.h -@@ -16,22 +16,142 @@ +@@ -16,22 +16,143 @@ enum ath79_mach_type { ATH79_MACH_GENERIC = 0, @@ -44,6 +44,7 @@ + ATH79_MACH_MR600V2, /* OpenMesh MR600v2 */ + ATH79_MACH_MR600, /* OpenMesh MR600 */ + ATH79_MACH_MYNET_N600, /* WD My Net N600 */ ++ ATH79_MACH_MYNET_N750, /* WD My Net N750 */ + ATH79_MACH_MYNET_REXT, /* WD My Net Wi-Fi Range Extender */ + ATH79_MACH_MZK_W04NU, /* Planex MZK-W04NU */ + ATH79_MACH_MZK_W300NH, /* Planex MZK-W300NH */ @@ -207,13 +208,13 @@ config ATH79_MACH_AP121 bool "Atheros AP121 reference board" select SOC_AR933X -@@ -9,64 +64,736 @@ config ATH79_MACH_AP121 - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO +@@ -11,62 +66,734 @@ config ATH79_MACH_AP121 select ATH79_DEV_M25P80 -- select ATH79_DEV_USB -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC + select ATH79_DEV_USB + select ATH79_DEV_WMAC +- help +- Say 'Y' here if you want your kernel to support the +- Atheros AP121 reference board. + help + Say 'Y' here if you want your kernel to support the + Atheros AP121 reference board. @@ -676,13 +677,8 @@ + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC -- help -- Say 'Y' here if you want your kernel to support the -- Atheros AP121 reference board. - --config ATH79_MACH_AP136 -- bool "Atheros AP136/AP135 reference board" ++ select ATH79_DEV_WMAC ++ +config ATH79_MACH_EAP7660D + bool "Senao EAP7660D support" + select SOC_AR71XX @@ -693,20 +689,14 @@ + +config ATH79_MACH_ARCHER_C7 + bool "TP-LINK Archer C7 board support" - select SOC_QCA955X ++ select SOC_QCA955X + select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO -- select ATH79_DEV_NFC - select ATH79_DEV_SPI - select ATH79_DEV_USB - select ATH79_DEV_WMAC -- help -- Say 'Y' here if you want your kernel to support the -- Atheros AP136 or AP135 reference boards. - --config ATH79_MACH_AP81 -- bool "Atheros AP81 reference board" ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_SPI ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ +config ATH79_MACH_TL_MR11U + bool "TP-LINK TL-MR11U/TL-MR3040 support" + select SOC_AR933X @@ -716,17 +706,27 @@ + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC -+ + +-config ATH79_MACH_AP136 +- bool "Atheros AP136/AP135 reference board" +- select SOC_QCA955X +config ATH79_MACH_TL_MR13U + bool "TP-LINK TL-MR13U support" + select SOC_AR933X + select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO +- select ATH79_DEV_NFC +- select ATH79_DEV_SPI + select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ + select ATH79_DEV_USB + select ATH79_DEV_WMAC +- help +- Say 'Y' here if you want your kernel to support the +- Atheros AP136 or AP135 reference boards. + +-config ATH79_MACH_AP81 +- bool "Atheros AP81 reference board" +config ATH79_MACH_TL_MR3020 + bool "TP-LINK TL-MR3020 support" + select SOC_AR933X @@ -970,7 +970,7 @@ config ATH79_MACH_UBNT_XM bool "Ubiquiti Networks XM/UniFi boards" -@@ -83,6 +810,65 @@ config ATH79_MACH_UBNT_XM +@@ -83,6 +810,75 @@ config ATH79_MACH_UBNT_XM Say 'Y' here if you want your kernel to support the Ubiquiti Networks XM (rev 1.0) board. @@ -984,6 +984,16 @@ + select ATH79_DEV_WMAC + select ATH79_NVRAM + ++config ATH79_MACH_MYNET_N750 ++ bool "WD My Net N750 board support" ++ select SOC_AR934X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ select ATH79_NVRAM ++ +config ATH79_MACH_MYNET_REXT + bool "WD My Net Wi-Fi Range Extender board support" + select SOC_AR934X @@ -1036,7 +1046,7 @@ endmenu config SOC_AR71XX -@@ -132,7 +918,10 @@ config ATH79_DEV_DSA +@@ -132,7 +928,10 @@ config ATH79_DEV_DSA config ATH79_DEV_ETH def_bool n @@ -1048,7 +1058,7 @@ def_bool n config ATH79_DEV_GPIO_BUTTONS -@@ -164,4 +953,7 @@ config ATH79_PCI_ATH9K_FIXUP +@@ -164,4 +963,7 @@ config ATH79_PCI_ATH9K_FIXUP config ATH79_ROUTERBOOT def_bool n @@ -1058,7 +1068,7 @@ endif --- a/arch/mips/ath79/Makefile +++ b/arch/mips/ath79/Makefile -@@ -38,9 +38,90 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route +@@ -38,9 +38,91 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route # # Machines # @@ -1091,6 +1101,7 @@ +obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o +obj-$(CONFIG_ATH79_MACH_MR600) += mach-mr600.o +obj-$(CONFIG_ATH79_MACH_MYNET_N600) += mach-mynet-n600.o ++obj-$(CONFIG_ATH79_MACH_MYNET_N750) += mach-mynet-n750.o +obj-$(CONFIG_ATH79_MACH_MYNET_REXT) += mach-mynet-rext.o +obj-$(CONFIG_ATH79_MACH_MZK_W04NU) += mach-mzk-w04nu.o +obj-$(CONFIG_ATH79_MACH_MZK_W300NH) += mach-mzk-w300nh.o -- 1.8.4.2 _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
