Hi all,
I'm currently using the latest trunk (r39047) with the "MyNet n600" and
have noticed that the wifi signal on the is lower than the official
firmware and will never reach 100% even with the device right next to the
router.
At about 2m away from the device the signal strength is about 45% on the
2.4ghz band and 85% on the 5ghz.
the iw info of both interfaces gives me this output for the antennas:
Available Antennas: TX 0x3 RX 0x3
Configured Antennas: TX 0x3 RX 0x3
it looks like the devices has 4 antennas on the board:
http://wiki.openwrt.org/_media/media/media/toh/wd/n600-pcb.jpg
Device info:
http://wiki.openwrt.org/toh/wd/n600
could it be that openwrt is not using all of these antennas?
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
