Now that the switch works correctly we can enable the images for this board.
Flashing from the factory firmware, the factory failsafe loader and sysupgrade was tested successfully. Signed-off-by: Felix Kaechele <[email protected]> --- target/linux/ar71xx/generic/profiles/wd.mk | 9 +++++++++ target/linux/ar71xx/image/Makefile | 1 + 2 files changed, 10 insertions(+) diff --git a/target/linux/ar71xx/generic/profiles/wd.mk b/target/linux/ar71xx/generic/profiles/wd.mk index badee44..b8cb99b 100644 --- a/target/linux/ar71xx/generic/profiles/wd.mk +++ b/target/linux/ar71xx/generic/profiles/wd.mk @@ -15,6 +15,15 @@ define Profile/MYNETN600/Description endef $(eval $(call Profile,MYNETN600)) +define Profile/MYNETN750 + NAME:=WD My Net N750 + PACKAGES:=kmod-usb-core kmod-usb2 +endef +define Profile/MYNETN750/Description + Package set optimized for the WD My Net N750 device. +endef + +$(eval $(call Profile,MYNETN750)) define Profile/MYNETREXT NAME:=WD My Net Wi-Fi Range Extender diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index 721860a..412cadd 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -955,6 +955,7 @@ $(eval $(call SingleProfile,Planex,64kraw,MZKW04NU,mzk-w04nu,MZK-W04NU,ttyS0,115 $(eval $(call SingleProfile,Planex,64kraw,MZKW300NH,mzk-w300nh,MZK-W300NH,ttyS0,115200)) $(eval $(call SingleProfile,Seama,64k,MYNETN600,mynet-n600,MYNET-N600,ttyS0,115200,$$(mynet_n600_mtdlayout),wrgnd16_wd_db600,1310720,16187392)) +$(eval $(call SingleProfile,Seama,64k,MYNETN750,mynet-n750,MYNET-N750,ttyS0,115200,$$(mynet_n600_mtdlayout),wrgnd13_wd_av,1310720,16187392)) $(eval $(call SingleProfile,TPLINKOLD,squashfs-only,TLWR841NV15,tl-wr841nd-v1.5,TL-WR841N-v1.5,ttyS0,115200,0x08410002,2,4M)) -- 1.8.4.2 _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
