On 29/11/13 16:24, Helmut Schaa wrote:
> I'd appreciate any testing beside my own :D
Hi, I did some testing on some alix boards. The config
I'm using is the following:
config device
option name br-ovs
option type ovs
list ifname eth0
config interface wan
option ifname br-ovs
option proto dhcp
Everything seems to work fine, the bridge is created
and the interface is added to it.
The only problem I;ve found is that if I change the device
name from br-ovs to (for example) ovs at the next reboot
the change is not applied.
Also, the device section could benefit from an ovs-controller
option to specify the controller for the switch.
Tested with OpenVSwitch 2.0.
R.
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
