Hi! Just installed OpenWRT Trunk on a Tplink TL-WR1043ND v2.1 here and it seemed to run fine until I used fwbuilder to create a firewall.
This also worked fine when started from the shell. Start and stop worked perfectly. However after I enabled this as a service to be ran by procd the result is a forever rebooting system. As I have remote logging turned on I can in the log see the following: Feb 22 09:13:34 fw syslog: Rebooting as procd has crashed The strange thing is that the trace immediately before that varies slightly. That is: there are different commands executed when this happens?? Seems a bit like a timeout crashing procd? I saw an addition of a timeout of 15 s for shutting down processes in procd. Hope that doesn't apply to startup too as the fwbuilder script definitely will take more than 15s to execute. The time between the reboots could well be 15s. Haven't timed them though. Another annoying thing is that failsafe mode will initiate (LED blinks rapidly) but the box doesn't answer on 192.168.1.1 on any port?? The only way I can get to the box after the procd failure is "reset to default" procedure. Please tell me if you need more info! Best Dag _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
