The OpenWrt build system uses MACHINE_FEATURES of fpu to set the HAS_FPU which in turn sets the default of CONFIG_SOFT_FLOAT as well as uClibc configuration. As the IMX6 SoC has both vfpv3 and NEON hardware support we want to add fpu to the feature list. This will default the IMX6 target to use -mfloat-abi=hard which will the be most efficient use of floating point.
When switching to hard float, we also need to enable VFP support in the kernel. Signed-off-by: Tim Harvey <[email protected]> --- target/linux/imx6/Makefile | 2 +- target/linux/imx6/config-3.10 | 5 +++-- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/target/linux/imx6/Makefile b/target/linux/imx6/Makefile index 38e8315..a7df176 100644 --- a/target/linux/imx6/Makefile +++ b/target/linux/imx6/Makefile @@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk ARCH:=arm BOARD:=imx6 BOARDNAME:=Freescale i.MX 6 Series -FEATURES:=audio display gpio pcie rtc usb usbgadget squashfs targz ubifs +FEATURES:=audio display fpu gpio pcie rtc usb usbgadget squashfs targz ubifs CPU_TYPE:=cortex-a9 CPU_SUBTYPE:=vfpv3 MAINTAINER:=Luka Perkov <[email protected]> diff --git a/target/linux/imx6/config-3.10 b/target/linux/imx6/config-3.10 index 3e69d68..3f189b8 100644 --- a/target/linux/imx6/config-3.10 +++ b/target/linux/imx6/config-3.10 @@ -245,7 +245,7 @@ CONFIG_MUTEX_SPIN_ON_OWNER=y # CONFIG_MXC_IRQ_PRIOR is not set CONFIG_MXS_DMA=y CONFIG_NEED_DMA_MAP_STATE=y -# CONFIG_NET_DMA is not set +CONFIG_NEON=y CONFIG_NLS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NO_HZ_COMMON=y @@ -350,7 +350,8 @@ CONFIG_USB_SUPPORT=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_USE_OF=y CONFIG_VECTORS_BASE=0xffff0000 -# CONFIG_VFP is not set +CONFIG_VFP=y +CONFIG_VFPv3=y CONFIG_VMSPLIT_2G=y # CONFIG_VMSPLIT_3G is not set # CONFIG_XEN is not set -- 1.8.3.2 _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
