[email protected] schrieb:
> Hello,
>
> I didn't get ANY response on my previous version... here it is again.
> Please apply this patch to add support for the GL-iNet devices.
>
> I've updated a patch, available at
> https://github.com/alzhao/Openwrt-patches-for-GL.iNet/blob/master/001-gl-38300.patch
>
>
> The patch (also at https://dev.openwrt.org/ticket/15632 ) includes
> support for the GL-Inet V1 devices. Which are mostly compatible with the
> TP-Link WR-703N boards.
>
> The devices have 64M ram, 16M flash and 2 ethernet interfaces.
>
> The original patch was written by alzhao <[email protected]> although as
> far as I can see he never bothered to get this patch included in the
> mainline.
>
> I currently have 20+ of these routers, so I would appreciate it if this
> patch was included into the mainline, as that would make life easier
> here.
>
> The patch adds the following files:
> target/linux/ar71xx/files/arch/mips/ath79/mach-gl-inet.c
> target/linux/ar71xx/generic/profiles/gl-connect.mk
> target/linux/ar71xx/patches-3.10/911-MIPS-ath79-gl-machine.patch
Hi,
not sure how it works to submit other people's patches, but at least for the
added lines in the files below, you could rework the patch to not mess up
alphabetic sort order. But best would probably be to contact the original patch
author and convince that guy to submit here.
> And adds a few lines to the following:
> tools/firmware-utils/src/mktplinkfw.c
> target/linux/ar71xx/config-3.10
> target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> target/linux/ar71xx/base-files/lib/ar71xx.sh
> target/linux/ar71xx/base-files/etc/uci-defaults/02_network
>
>
>
> I myself do not claim any copyright on this, as I only rebased the
> patch. The original copyright statement included is/was:
>
> /*
> * GL-CONNECT iNet board support
> *
> * Copyright (C) 2011 dongyuqi <[email protected]>
> * Copyright (C) 2011-2012 Gabor Juhos <[email protected]>
> * Copyright (C) 2013 alzhao <[email protected]>
> *
> * This program is free software; you can redistribute it and/or modify it
> * under the terms of the GNU General Public License version 2 as published
> * by the Free Software Foundation.
> */
>
> Signed-off-by: Mark Janssen <[email protected]>
> Signed-off-by: alzhao <[email protected]>
>
>
> -------------------------- patch ------------------------------
>
> diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
> b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
> index 62373e4..ff6d4d7 100755
> --- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
> +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
> @@ -268,6 +268,10 @@ dir-505-a1)
> ucidef_set_interface_lan "eth1"
> ;;
>
> +gl-inet)
> + ucidef_set_interfaces_lan_wan "eth1" "eth0"
> + ;;
> +
> alfa-ap96 |\
> alfa-nx |\
> ap83 |\
> diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh
> b/target/linux/ar71xx/base-files/lib/ar71xx.sh
> index 02c46f9..9099f45 100755
> --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
> +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
> @@ -214,6 +214,9 @@ ar71xx_board_detect() {
> *"Oolite V1.0")
> name="oolite"
> ;;
> + *"GL-CONNECT INET v1")
> + name="gl-inet"
> + ;;
> *"AirRouter")
> name="airrouter"
> ;;
> diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> index 37ceea6..4760cd8 100755
> --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> @@ -242,6 +242,7 @@ platform_check_image() {
> tl-wdr4300 | \
> tl-wdr4900-v2 | \
> tl-wr703n | \
> + gl-inet | \
> tl-wr710n | \
> tl-wr720n-v3 | \
> tl-wr741nd | \
> diff --git a/target/linux/ar71xx/config-3.10 b/target/linux/ar71xx/config-3.10
> index 4eb4b9f..f448f9d 100644
> --- a/target/linux/ar71xx/config-3.10
> +++ b/target/linux/ar71xx/config-3.10
> @@ -88,6 +88,7 @@ CONFIG_ATH79_MACH_TL_WR1043ND=y
> CONFIG_ATH79_MACH_TL_WR1043ND_V2=y
> CONFIG_ATH79_MACH_TL_WR2543N=y
> CONFIG_ATH79_MACH_TL_WR703N=y
> +CONFIG_ATH79_MACH_GL_INET=y
> CONFIG_ATH79_MACH_TL_WR720N_V3=y
> CONFIG_ATH79_MACH_TL_WR741ND=y
> CONFIG_ATH79_MACH_TL_WR741ND_V4=y
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-inet.c
> b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-inet.c
> new file mode 100644
> index 0000000..0908918
> --- /dev/null
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-inet.c
> @@ -0,0 +1,106 @@
> +/*
> + * GL-CONNECT iNet board support
> + *
> + * Copyright (C) 2011 dongyuqi <[email protected]>
> + * Copyright (C) 2011-2012 Gabor Juhos <[email protected]>
> + * Copyright (C) 2013 alzhao <[email protected]>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published
> + * by the Free Software Foundation.
> + */
> +
> +#include <linux/gpio.h>
> +
> +#include <asm/mach-ath79/ath79.h>
> +
> +#include "dev-eth.h"
> +#include "dev-gpio-buttons.h"
> +#include "dev-leds-gpio.h"
> +#include "dev-m25p80.h"
> +#include "dev-usb.h"
> +#include "dev-wmac.h"
> +#include "machtypes.h"
> +
> +#define GL_INET_GPIO_LED_WLAN 0
> +#define GL_INET_GPIO_LED_LAN 13
> +#define GL_INET_GPIO_BTN_RESET 11
> +
> +#define GL_INET_KEYS_POLL_INTERVAL 20 /* msecs */
> +#define GL_INET_KEYS_DEBOUNCE_INTERVAL (3 * GL_INET_KEYS_POLL_INTERVAL)
> +
> +static const char *gl_inet_part_probes[] = {
> + "tp-link", //dont change, this will use tplink parser
Terrible coding style. Comments in /* bla bla */, also "don't". Also too much
indention here and even in many cases further down.
> + NULL ,
> +};
> +
> +static struct flash_platform_data gl_inet_flash_data = {
> + .part_probes = gl_inet_part_probes,
> +};
> +
> +static struct gpio_led gl_inet_leds_gpio[] __initdata = {
> + {
> + .name = "gl-connect:red:wireless",
> + .gpio = GL_INET_GPIO_LED_WLAN,
> + .active_low = 0,
> + },
> + {
> + .name = "gl-connect:green:lan",
> + .gpio = GL_INET_GPIO_LED_LAN,
> + .active_low = 0,
> + .default_state = 1,
> + },
> +};
> +
> +static struct gpio_keys_button gl_inet_gpio_keys[] __initdata = {
> + {
> + .desc = "reset",
> + .type = EV_KEY,
> + .code = KEY_RESTART,
> + .debounce_interval =
> GL_INET_KEYS_DEBOUNCE_INTERVAL,
> + .gpio = GL_INET_GPIO_BTN_RESET,
> + .active_low = 0,
> + }
> +};
> +
> +static void __init gl_inet_setup(void) {
> +
> + /* get the mac address which is stored in the 1st 64k uboot MTD */
> + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
> + /* get the art address, which is the last 64k. by usng 0x1fff1000, it
> doesn't matter it is 4M, 8M or 16M flash */
Coding style says normally, to use 80 characters per line, max.
> + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
> +
> + //Todo: what is this
> + /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
> + ath79_setup_ar933x_phy4_switch(false, false);
> +
> + /* register flash. MTD will use tp-link parser to parser MTD*/
> + ath79_register_m25p80(&gl_inet_flash_data);
> +
> + /* register gpio LED and Key */
> + ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_inet_leds_gpio),
> gl_inet_leds_gpio);
> +
> + ath79_register_gpio_keys_polled(-1, GL_INET_KEYS_POLL_INTERVAL,
> ARRAY_SIZE(gl_inet_gpio_keys),
> + gl_inet_gpio_keys);
Align with opening parenthesis (and 80 chars per line).
> +
> + /* enable usb */
> + ath79_register_usb();
> +
> + /* register eth0 as WAN, eth1 as LAN */
> + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
> +
> + ath79_register_mdio(0, 0x0);
> + ath79_register_eth(0);
> + ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
> + ath79_register_eth(1);
> +
> + /* register wireless mac with cal data*/
> + ath79_register_wmac(ee, mac);
> +
> +}
> +/* Important:
> + * $1: machtype, is used to identify profiles
> + * $2: machine id
> + * The init scripts will use the "Name" to detect which board, be sure to
> modify the scripts
> + */
> +MIPS_MACHINE(ATH79_MACH_GL_INET, "GL-INET", "GL-CONNECT INET v1",
> gl_inet_setup);
> diff --git a/target/linux/ar71xx/generic/profiles/gl-connect.mk
> b/target/linux/ar71xx/generic/profiles/gl-connect.mk
> new file mode 100644
> index 0000000..0a09ff2
> --- /dev/null
> +++ b/target/linux/ar71xx/generic/profiles/gl-connect.mk
> @@ -0,0 +1,16 @@
> +#
> +# Copyright (C) 2009 OpenWrt.org
> +#
> +# This is free software, licensed under the GNU General Public License v2.
> +# See /LICENSE for more information.
> +#
> +
> +define Profile/GLINET
> + NAME:=GL INET
> + PACKAGES:=kmod-usb-core kmod-usb2
> +endef
> +
> +define Profile/GLINET/Description
> + Package set optimized for the GL INET LITE 001.
> +endef
> +$(eval $(call Profile,GLINET))
> diff --git a/target/linux/ar71xx/image/Makefile
> b/target/linux/ar71xx/image/Makefile
> index 8234f88..9aa47ce 100644
> --- a/target/linux/ar71xx/image/Makefile
> +++ b/target/linux/ar71xx/image/Makefile
> @@ -1122,6 +1122,7 @@ $(eval $(call
> SingleProfile,TPLINK-LZMA,64kraw,TLMR3040V2,tl-mr3040-v2,TL-MR3040
> $(eval $(call
> SingleProfile,TPLINK-LZMA,64kraw,TLMR3220V2,tl-mr3220-v2,TL-MR3220-v2,ttyATH0,115200,0x32200002,1,4Mlzma))
> $(eval $(call
> SingleProfile,TPLINK-LZMA,64kraw,TLMR3420V2,tl-mr3420-v2,TL-MR3420-v2,ttyS0,115200,0x34200002,1,4Mlzma))
> $(eval $(call
> SingleProfile,TPLINK-LZMA,64kraw,TLWR703,tl-wr703n-v1,TL-WR703N,ttyATH0,115200,0x07030101,1,4Mlzma))
> +$(eval $(call
> SingleProfile,TPLINK-LZMA,64kraw,GLINET,gl-inet-v1,GL-INET,ttyATH0,115200,0x08000001,1,8Mlzma))
> $(eval $(call
> SingleProfile,TPLINK-LZMA,64kraw,TLWR710,tl-wr710n-v1,TL-WR710N,ttyATH0,115200,0x07100001,1,8Mlzma))
> $(eval $(call
> SingleProfile,TPLINK-LZMA,64kraw,TLWR720NV3,tl-wr720n-v3,TL-WR720N-v3,ttyATH0,115200,0x07200103,1,4Mlzma))
> $(eval $(call
> SingleProfile,TPLINK-LZMA,64kraw,TLWR740NV4,tl-wr740n-v4,TL-WR741ND-v4,ttyATH0,115200,0x07400004,1,4Mlzma))
> diff --git a/target/linux/ar71xx/patches-3.10/911-MIPS-ath79-gl-machine.patch
> b/target/linux/ar71xx/patches-3.10/911-MIPS-ath79-gl-machine.patch
> new file mode 100644
> index 0000000..201104c
> --- /dev/null
> +++ b/target/linux/ar71xx/patches-3.10/911-MIPS-ath79-gl-machine.patch
> @@ -0,0 +1,40 @@
> +--- a/arch/mips/ath79/Kconfig
> ++++ b/arch/mips/ath79/Kconfig
> +@@ -586,6 +586,17 @@ config ATH79_MACH_TL_WR703N
> + select ATH79_DEV_USB
> + select ATH79_DEV_WMAC
> +
> ++config ATH79_MACH_GL_INET
> ++ bool "GL-INET support"
> ++ select SOC_AR933X
> ++ select ATH79_DEV_ETH
> ++ select ATH79_DEV_GPIO_BUTTONS
> ++ select ATH79_DEV_LEDS_GPIO
> ++ select ATH79_DEV_M25P80
> ++ select ATH79_DEV_USB
> ++ select ATH79_DEV_WMAC
> ++
> ++
> + config ATH79_MACH_TL_WR720N_V3
> + bool "TP-LINK TL-WR720N v3 support"
> + select SOC_AR933X
> +--- a/arch/mips/ath79/machtypes.h
> ++++ b/arch/mips/ath79/machtypes.h
> +@@ -98,6 +98,7 @@ enum ath79_mach_type {
> + ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */
> + ATH79_MACH_TL_WR2543N, /* TP-LINK TL-WR2543N/ND */
> + ATH79_MACH_TL_WR703N, /* TP-LINK TL-WR703N */
> ++ ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */
> + ATH79_MACH_TL_WR710N, /* TP-LINK TL-WR710N */
> + ATH79_MACH_TL_WR720N_V3, /* TP-LINK TL-WR720N v3 */
> + ATH79_MACH_TL_WR741ND, /* TP-LINK TL-WR741ND */
> +--- a/arch/mips/ath79/Makefile
> ++++ b/arch/mips/ath79/Makefile
> +@@ -94,6 +94,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WR1041N_V2) +
> + obj-$(CONFIG_ATH79_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o
> + obj-$(CONFIG_ATH79_MACH_TL_WR2543N) += mach-tl-wr2543n.o
> + obj-$(CONFIG_ATH79_MACH_TL_WR703N) += mach-tl-wr703n.o
> ++obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o
> + obj-$(CONFIG_ATH79_MACH_TL_WR720N_V3) += mach-tl-wr720n-v3.o
> + obj-$(CONFIG_ATH79_MACH_UBNT) += mach-ubnt.o
> + obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o
> diff --git a/tools/firmware-utils/src/mktplinkfw.c
> b/tools/firmware-utils/src/mktplinkfw.c
> index f0b33a0..1bed464 100644
> --- a/tools/firmware-utils/src/mktplinkfw.c
> +++ b/tools/firmware-utils/src/mktplinkfw.c
> @@ -66,6 +66,7 @@
> #define HWID_TL_WR1043ND_V2 0x10430002
> #define HWID_TL_WR1041N_V2 0x10410002
> #define HWID_TL_WR2543N_V1 0x25430001
> +#define HWID_GL_INET_V1 0x08000001
>
> #define MD5SUM_LEN 16
>
> @@ -393,6 +394,11 @@ static struct board_info boards[] = {
> .hw_rev = 1,
> .layout_id = "16Mlzma",
> }, {
> + .id = "GL-INETv1",
> + .hw_id = HWID_GL_INET_V1,
> + .hw_rev = 1,
> + .layout_id = "8Mlzma",
> + }, {
> /* terminating entry */
> }
> };
> _______________________________________________
> openwrt-devel mailing list
> [email protected]
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
