Hi, all:
My board is a Dual-flash device, and I want to make openwrt support on it.
The chip is compatible with M25P80, detail model is MX25L12845EMI-10G. The 1st
flash GPIO pin is GPIO5, and the 2nd is GPIO-13.
I had refer to the arch/mips/ath79/dev-m25p80.c and dev-spi.c , etc, but
failed with many try.
So, my question is how can I modified the relevant code to make it support
my dual-flah, any hints will be appreciated.If you interested in this case or
had done a similar case with it, please let me know, thansk
------------------
Regards,
banglang huang
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
