On Mon, Jun 9, 2014 at 3:55 PM, Felix Fietkau <[email protected]> wrote:
> On 2014-06-09 21:37, Chirag Chhatriwala wrote: > > Hello Felix and other devs, > > > > I recently went from r39555 (BB) to r41055 (also BB) without sysupgrade, > > direct update of firmware. I've got a couple of WD N750 Routers that I > > like to run in WDS mode. After flashing 41055 and then configuring, WDS > > on the routers, I was left completely locked out of the WDS Client > router. > > > > There were quite a few changes which I ruled out as the cause and > > ultimately narrowed out the changeset in 40773 [1] causes WDS Client > > Routers to stop being adminsterable via SSH or LuCI. > > > > I'm not sure if this change warrants a trac ticket item so I emailed the > > group as a heads-up. I can create a ticket if I don't hear back within a > > couple of days. > I haven't seen anything similar in my own tests (and I've been using WDS > as well). Please show me your configuration (network and wireless) so I > can try to reproduce it. > > Thanks, > > - Felix > > Hi Felix, I've attached the /etc/config/network and /etc/config/wireless for both the Main WDS Access Point (_ap files) and the 2ndary WDS Client+AP (_sta files). Point to note that if I had went through a sysupgrade from (which I also tried as well), this issue wouldn't manifest as r39555 did not yet make use of "option force_link 1". In which case, there were no issues with the WDS Client router receiving a proper IP and being accessible via SSH/LuCI. Problem only occurred when I loaded a fresh install of r41055 on both WD MyNet N750 routers and manually configured WDS in the AP and the Client router. Hope this helps, Chirag
network_ap
Description: Binary data
wireless_ap
Description: Binary data
network_sta
Description: Binary data
wireless_sta
Description: Binary data
dhcp_sta
Description: Binary data
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
