I'm afraid this patch has seriously been mangled by your mail client, please resend. Also, even though there is already some mess-up in alphabetic order in ar71xx_board_detect(), your entry should be between eap7660d and ja76pf.
Forest Crossman schrieb: > Signed-off-by: Forest Crossman <[email protected]> > --- > package/base-files/files/lib/functions/system.sh | 1 + > target/linux/ar71xx/base-files/etc/diag.sh | 3 + > .../ar71xx/base-files/etc/uci-defaults/01_leds | 5 + > .../ar71xx/base-files/etc/uci-defaults/02_network | 11 + > target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 + > target/linux/ar71xx/config-3.10 | 1 + > .../ar71xx/files/arch/mips/ath79/mach-esr900.c | 232 > +++++++++++++++++++++ > target/linux/ar71xx/files/arch/mips/ath79/nvram.c | 16 ++ > target/linux/ar71xx/generic/profiles/engenius.mk | 16 ++ > target/linux/ar71xx/image/Makefile | 2 + > .../610-MIPS-ath79-openwrt-machines.patch | 18 +- > 11 files changed, 305 insertions(+), 3 deletions(-) > create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-esr900.c > create mode 100644 target/linux/ar71xx/generic/profiles/engenius.mk > > diff --git a/package/base-files/files/lib/functions/system.sh > b/package/base-files/files/lib/functions/system.sh > index a4c0f26..8d75a5a 100644 > --- a/package/base-files/files/lib/functions/system.sh > +++ b/package/base-files/files/lib/functions/system.sh > @@ -82,6 +82,7 @@ macaddr_canonicalize() > local mac="$1" > local canon="" > > + mac=$(echo -n $mac | tr -d \") > [ ${#mac} -gt 17 ] && return > [ -n "${mac//[a-fA-F0-9\.: -]/}" ] && return > > diff --git a/target/linux/ar71xx/base-files/etc/diag.sh > b/target/linux/ar71xx/base-files/etc/diag.sh > index d5063de..81e4eff 100755 > --- a/target/linux/ar71xx/base-files/etc/diag.sh > +++ b/target/linux/ar71xx/base-files/etc/diag.sh > @@ -238,6 +238,9 @@ get_status_led() { > wlr8100) > status_led="sitecom:amber:status" > ;; > + esr900) > + status_led="engenius:amber:power" > + ;; > esac > } > > diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds > b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds > index fe5ff93..8265b00 100755 > --- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds > +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds > @@ -103,6 +103,11 @@ dir-825-c1) > ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "d-link:blue:wlan2g" "phy0tpt" > ;; > > +esr900) > + ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "engenius:blue:wlan-2g" > "phy0tpt" > + ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "engenius:blue:wlan-5g" "phy1tpt" > + ;; > + > hiwifi-hc6361) > ucidef_set_led_default "inet" "INET" "hiwifi:blue:internet" "0" > ucidef_set_led_wlan "wlan" "WLAN" "hiwifi:blue:wlan-2p4" "phy0tpt" > diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network > b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network > index a2b2762..08bd1c8 100755 > --- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network > +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network > @@ -378,6 +378,17 @@ wndr3700) > uci set network.@switch_port[-1].led='2' > ;; > > +esr900) > + local wan_mac > + local lan_mac > + ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" > + ucidef_add_switch "switch0" "1" "1" > + ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4" > + ucidef_add_switch_vlan "switch0" "2" "0t 5" > + wan_mac=$(mtd_get_mac_ascii u-boot-env "wanaddr") > + [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac" > + ;; > + > *) > ucidef_set_interfaces_lan_wan "eth0" "eth1" > ;; > diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh > b/target/linux/ar71xx/base-files/lib/ar71xx.sh > index 6dd5e62..e346f97 100755 > --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh > +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh > @@ -676,6 +676,9 @@ ar71xx_board_detect() { > *"HiWiFi HC6361") > name="hiwifi-hc6361" > ;; > + *"EnGenius ESR900") > + name="esr900" > + ;; > esac > > case "$machine" in > diff --git a/target/linux/ar71xx/config-3.10 b/target/linux/ar71xx/config-3.10 > index c294cd8..78d5359 100644 > --- a/target/linux/ar71xx/config-3.10 > +++ b/target/linux/ar71xx/config-3.10 > @@ -47,6 +47,7 @@ CONFIG_ATH79_MACH_DIR_825_B1=y > CONFIG_ATH79_MACH_DIR_825_C1=y > CONFIG_ATH79_MACH_DRAGINO2=y > CONFIG_ATH79_MACH_EAP7660D=y > +CONFIG_ATH79_MACH_ESR900=y > CONFIG_ATH79_MACH_EW_DORIN=y > CONFIG_ATH79_MACH_GS_OOLITE=y > CONFIG_ATH79_MACH_HORNET_UB=y > diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-esr900.c > b/target/linux/ar71xx/files/arch/mips/ath79/mach-esr900.c > new file mode 100644 > index 0000000..64e590a > --- /dev/null > +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-esr900.c > @@ -0,0 +1,232 @@ > +/* > + * EnGenius ESR900 board support > + * > + * Based on the Qualcomm Atheros AP135/AP136 reference board support code > + * Copyright (c) 2012 Qualcomm Atheros > + * Copyright (c) 2012-2013 Gabor Juhos <[email protected]> > + * > + * Permission to use, copy, modify, and/or distribute this software for any > + * purpose with or without fee is hereby granted, provided that the above > + * copyright notice and this permission notice appear in all copies. > + * > + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES > + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF > + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR > + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES > + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN > + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF > + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. > + * > + */ > + > +#include <linux/platform_device.h> > +#include <linux/ar8216_platform.h> > + > +#include <asm/mach-ath79/ar71xx_regs.h> > + > +#include "common.h" > +#include "pci.h" > +#include "dev-ap9x-pci.h" > +#include "dev-gpio-buttons.h" > +#include "dev-eth.h" > +#include "dev-leds-gpio.h" > +#include "dev-m25p80.h" > +#include "dev-usb.h" > +#include "dev-wmac.h" > +#include "machtypes.h" > +#include "nvram.h" > + > +#define ESR900_GPIO_LED_POWER 2 > +#define ESR900_GPIO_LED_WLAN_2G 13 > +#define ESR900_GPIO_LED_WPS_BLUE 19 > +#define ESR900_GPIO_LED_WPS_AMBER 22 > +#define ESR900_GPIO_LED_WLAN_5G 23 > + > +#define ESR900_GPIO_BTN_WPS 16 > +#define ESR900_GPIO_BTN_RESET 17 > + > +#define ESR900_KEYS_POLL_INTERVAL 20 /* msecs */ > +#define ESR900_KEYS_DEBOUNCE_INTERVAL (3 * ESR900_KEYS_POLL_INTERVAL) > + > +#define ESR900_CALDATA_ADDR 0x1fff0000 > +#define ESR900_WMAC_CALDATA_OFFSET 0x1000 > +#define ESR900_PCIE_CALDATA_OFFSET 0x5000 > + > +#define ESR900_CONFIG_ADDR 0x1f030000 > +#define ESR900_CONFIG_SIZE 0x10000 > + > +#define ESR900_LAN_PHYMASK BIT(0) > +#define ESR900_WAN_PHYMASK BIT(5) > +#define ESR900_MDIO_MASK (~(ESR900_LAN_PHYMASK | ESR900_WAN_PHYMASK)) > + > +static struct gpio_led esr900_leds_gpio[] __initdata = { > + { > + .name = "engenius:amber:power", > + .gpio = ESR900_GPIO_LED_POWER, > + .active_low = 1, > + }, > + { > + .name = "engenius:blue:wlan-2g", > + .gpio = ESR900_GPIO_LED_WLAN_2G, > + .active_low = 1, > + }, > + { > + .name = "engenius:blue:wps", > + .gpio = ESR900_GPIO_LED_WPS_BLUE, > + .active_low = 1, > + }, > + { > + .name = "engenius:amber:wps", > + .gpio = ESR900_GPIO_LED_WPS_AMBER, > + .active_low = 1, > + }, > + { > + .name = "engenius:blue:wlan-5g", > + .gpio = ESR900_GPIO_LED_WLAN_5G, > + .active_low = 1, > + } > +}; > + > +static struct gpio_keys_button esr900_gpio_keys[] __initdata = { > + { > + .desc = "WPS button", > + .type = EV_KEY, > + .code = KEY_WPS_BUTTON, > + .debounce_interval = ESR900_KEYS_DEBOUNCE_INTERVAL, > + .gpio = ESR900_GPIO_BTN_WPS, > + .active_low = 1, > + }, > + { > + .desc = "Reset button", > + .type = EV_KEY, > + .code = KEY_RESTART, > + .debounce_interval = ESR900_KEYS_DEBOUNCE_INTERVAL, > + .gpio = ESR900_GPIO_BTN_RESET, > + .active_low = 1, > + }, > +}; > + > +static struct ar8327_pad_cfg esr900_ar8327_pad0_cfg; > +static struct ar8327_pad_cfg esr900_ar8327_pad6_cfg; > + > +static struct ar8327_platform_data esr900_ar8327_data = { > + .pad0_cfg = &esr900_ar8327_pad0_cfg, > + .pad6_cfg = &esr900_ar8327_pad6_cfg, > + .port0_cfg = { > + .force_link = 1, > + .speed = AR8327_PORT_SPEED_1000, > + .duplex = 1, > + .txpause = 1, > + .rxpause = 1, > + }, > + .port6_cfg = { > + .force_link = 1, > + .speed = AR8327_PORT_SPEED_1000, > + .duplex = 1, > + .txpause = 1, > + .rxpause = 1, > + }, > +}; > + > +static struct mdio_board_info esr900_mdio0_info[] = { > + { > + .bus_id = "ag71xx-mdio.0", > + .phy_addr = 0, > + .platform_data = &esr900_ar8327_data, > + }, > +}; > + > +static void __init esr900_gmac_setup(void) > +{ > + void __iomem *base; > + u32 t; > + > + base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE); > + > + t = __raw_readl(base + QCA955X_GMAC_REG_ETH_CFG); > + > + t &= ~(QCA955X_ETH_CFG_RGMII_EN | QCA955X_ETH_CFG_GE0_SGMII); > + t |= QCA955X_ETH_CFG_RGMII_EN; > + > + __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG); > + > + iounmap(base); > +} > + > +static void __init esr900_common_setup(void) > +{ > + const char *config = (char *) KSEG1ADDR(ESR900_CONFIG_ADDR); > + u8 *art = (u8 *) KSEG1ADDR(ESR900_CALDATA_ADDR); > + u8 lan_mac[6]; > + u8 wlan0_mac[6]; > + u8 wlan1_mac[6]; > + > + if (ath79_nvram_parse_mac_addr(config, ESR900_CONFIG_SIZE, > + "ethaddr=", lan_mac) == 0) { > + ath79_init_local_mac(ath79_eth0_data.mac_addr, lan_mac); > + ath79_init_mac(wlan0_mac, lan_mac, 0); > + ath79_init_mac(wlan1_mac, lan_mac, 1); > + } else { > + printk(KERN_ERR "mach-esr900: could not find ethaddr in u-boot > environment\n"); > + } > + > + ath79_register_m25p80(NULL); > + > + ath79_register_leds_gpio(-1, ARRAY_SIZE(esr900_leds_gpio), > + esr900_leds_gpio); > + ath79_register_gpio_keys_polled(-1, ESR900_KEYS_POLL_INTERVAL, > + ARRAY_SIZE(esr900_gpio_keys), > + esr900_gpio_keys); > + > + ath79_register_usb(); > + > + ath79_register_wmac(art + ESR900_WMAC_CALDATA_OFFSET, wlan0_mac); > + > + esr900_gmac_setup(); > + > + ath79_register_mdio(0, 0x0); > + > + mdiobus_register_board_info(esr900_mdio0_info, > + ARRAY_SIZE(esr900_mdio0_info)); > + > + /* GMAC0 is connected to the RMGII interface */ > + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; > + ath79_eth0_data.phy_mask = ESR900_LAN_PHYMASK; > + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; > + > + ath79_register_eth(0); > + > + /* GMAC1 is connected to the SGMII interface */ > + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; > + ath79_eth1_data.speed = SPEED_1000; > + ath79_eth1_data.duplex = DUPLEX_FULL; > + > + ath79_register_eth(1); > + > + ap91_pci_init(art + ESR900_PCIE_CALDATA_OFFSET, wlan1_mac); > +} > + > +static void __init esr900_010_setup(void) > +{ > + /* GMAC0 of the AR8337 switch is connected to GMAC0 via RGMII */ > + esr900_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII; > + esr900_ar8327_pad0_cfg.txclk_delay_en = true; > + esr900_ar8327_pad0_cfg.rxclk_delay_en = true; > + esr900_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1; > + esr900_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2; > + > + /* GMAC6 of the AR8337 switch is connected to GMAC1 via SGMII */ > + esr900_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII; > + esr900_ar8327_pad6_cfg.rxclk_delay_en = true; > + esr900_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0; > + > + ath79_eth0_pll_data.pll_1000 = 0xa6000000; > + ath79_eth1_pll_data.pll_1000 = 0x03000101; > + > + esr900_common_setup(); > +} > + > +MIPS_MACHINE(ATH79_MACH_ESR900, "ESR900", > + "EnGenius ESR900", > + esr900_010_setup); > + > diff --git a/target/linux/ar71xx/files/arch/mips/ath79/nvram.c > b/target/linux/ar71xx/files/arch/mips/ath79/nvram.c > index 43911b8..9507239 100644 > --- a/target/linux/ar71xx/files/arch/mips/ath79/nvram.c > +++ b/target/linux/ar71xx/files/arch/mips/ath79/nvram.c > @@ -16,6 +16,21 @@ > > #include "nvram.h" > > +char *ath79_nvram_sanitize_mac(char *input) > +{ > + int i,j; > + char *output=input; > + for (i = 0, j = 0; i<strlen(input); i++,j++) > + { > + if (input[i]!='\"') > + output[j]=input[i]; > + else > + j--; > + } > + output[j]=0; > + return output; > +} > + > char *ath79_nvram_find_var(const char *name, const char *buf, unsigned > buf_len) > { > unsigned len = strlen(name); > @@ -59,6 +74,7 @@ int ath79_nvram_parse_mac_addr(const char *nvram, > unsigned nvram_len, > goto free; > } > > + mac_str = ath79_nvram_sanitize_mac(mac_str); > t = sscanf(mac_str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx", > &mac[0], &mac[1], &mac[2], &mac[3], &mac[4], &mac[5]); > > diff --git a/target/linux/ar71xx/generic/profiles/engenius.mk > b/target/linux/ar71xx/generic/profiles/engenius.mk > new file mode 100644 > index 0000000..343ced6 > --- /dev/null > +++ b/target/linux/ar71xx/generic/profiles/engenius.mk > @@ -0,0 +1,16 @@ > +# > +# Copyright (C) 2009-2013 OpenWrt.org > +# > +# This is free software, licensed under the GNU General Public License v2. > +# See /LICENSE for more information. > +# > +define Profile/ESR900 > + NAME:=EnGenius ESR900 > + PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev > +endef > + > +define Profile/ESR900/Description > + Package set optimized for the EnGenius ESR900 > +endef > + > +$(eval $(call Profile,ESR900)) > diff --git a/target/linux/ar71xx/image/Makefile > b/target/linux/ar71xx/image/Makefile > index d0ee363..303a84b 100644 > --- a/target/linux/ar71xx/image/Makefile > +++ b/target/linux/ar71xx/image/Makefile > @@ -264,6 +264,7 @@ > cap4200ag_mtdlayout=mtdparts=spi0.0:256k(u-boot),64k(u-boot-env),320k(custom)ro, > > db120_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware) > > cameo_ap94_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,1600k(unknown)ro,64k@0x7f0000(caldata_copy) > > cameo_ap94_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7808k(firmware),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig) > +esr900_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,14656k(firmware),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro > > ew-dorin_mtdlayout_4M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),3712k(firmware),64k(art) > > ew-dorin_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art) > > dlrtdev_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,640k(certs),960k(unknown)ro,64k@0x7f0000(caldata_copy) > @@ -1032,6 +1033,7 @@ $(eval $(call > SingleProfile,AthLzma,64k,BXU2000N2,bxu2000n-2-a1,BXU2000n-2-A1,tt > $(eval $(call > SingleProfile,AthLzma,64k,CAP4200AG,cap4200ag,CAP4200AG,ttyS0,115200,$$(cap4200ag_mtdlayout),KRuImage)) > $(eval $(call > SingleProfile,AthLzma,64k,DB120,db120,DB120,ttyS0,115200,$$(db120_mtdlayout),RKuImage)) > $(eval $(call > SingleProfile,AthLzma,64k,DRAGINO2,dragino2,DRAGINO2,ttyATH0,115200,$$(dragino2_mtdlayout),KRuImage,65536)) > +$(eval $(call > SingleProfile,AthLzma,64k,ESR900,esr900,ESR900,ttyS0,115200,$$(esr900_mtdlayout),KRuImage)) > $(eval $(call > SingleProfile,AthLzma,64k,EWDORINAP,ew-dorin,EW-DORIN,ttyATH0,115200,$$(ew-dorin_mtdlayout_4M),KRuImage,65536)) > $(eval $(call > SingleProfile,AthLzma,64k,EWDORINRT,ew-dorin-router,EW-DORIN-ROUTER,ttyATH0,115200,$$(ew-dorin_mtdlayout_4M),KRuImage,65536)) > $(eval $(call > SingleProfile,AthLzma,64k,EWDORIN16M,ew-dorin-16M,EW-DORIN,ttyATH0,115200,$$(ew-dorin_mtdlayout_16M),KRuImage,65536)) > diff --git > a/target/linux/ar71xx/patches-3.10/610-MIPS-ath79-openwrt-machines.patch > b/target/linux/ar71xx/patches-3.10/610-MIPS-ath79-openwrt-machines.patch > index 2dfecd2..12e1bbf 100644 > --- a/target/linux/ar71xx/patches-3.10/610-MIPS-ath79-openwrt-machines.patch > +++ b/target/linux/ar71xx/patches-3.10/610-MIPS-ath79-openwrt-machines.patch > @@ -1,6 +1,6 @@ > --- a/arch/mips/ath79/machtypes.h > +++ b/arch/mips/ath79/machtypes.h > -@@ -16,22 +16,143 @@ > +@@ -16,22 +16,144 @@ > > enum ath79_mach_type { > ATH79_MACH_GENERIC = 0, > @@ -35,6 +35,7 @@ > + ATH79_MACH_DIR_825_C1, /* D-Link DIR-825 rev. C1 */ > + ATH79_MACH_DIR_835_A1, /* D-Link DIR-835 rev. A1 */ > + ATH79_MACH_DRAGINO2, /* Dragino Version 2 */ > ++ ATH79_MACH_ESR900, /* EnGenius ESR900 */ > + ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */ > + ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */ > + ATH79_MACH_EAP7660D, /* Senao EAP7660D */ > @@ -208,7 +209,7 @@ > config ATH79_MACH_AP121 > bool "Atheros AP121 reference board" > select SOC_AR933X > -@@ -9,64 +64,736 @@ config ATH79_MACH_AP121 > +@@ -9,64 +64,746 @@ config ATH79_MACH_AP121 > select ATH79_DEV_GPIO_BUTTONS > select ATH79_DEV_LEDS_GPIO > select ATH79_DEV_M25P80 > @@ -353,6 +354,16 @@ > + select ATH79_DEV_USB > + select ATH79_DEV_WMAC > + > ++config ATH79_MACH_ESR900 > ++ bool "EnGenius ESR900 board support" > ++ select SOC_QCA955X > ++ select ATH79_DEV_ETH > ++ select ATH79_DEV_GPIO_BUTTONS > ++ select ATH79_DEV_LEDS_GPIO > ++ select ATH79_DEV_SPI > ++ select ATH79_DEV_USB > ++ select ATH79_DEV_WMAC > ++ > +config ATH79_MACH_WZR_HP_AG300H > + bool "Buffalo WZR-HP-AG300H board support" > + select SOC_AR71XX > @@ -1059,7 +1070,7 @@ > endif > --- a/arch/mips/ath79/Makefile > +++ b/arch/mips/ath79/Makefile > -@@ -38,9 +38,90 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route > +@@ -38,9 +38,91 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route > # > # Machines > # > @@ -1085,6 +1096,7 @@ > +obj-$(CONFIG_ATH79_MACH_DIR_825_B1) += mach-dir-825-b1.o > +obj-$(CONFIG_ATH79_MACH_DIR_825_C1) += mach-dir-825-c1.o > +obj-$(CONFIG_ATH79_MACH_DRAGINO2) += mach-dragino2.o > ++obj-$(CONFIG_ATH79_MACH_ESR900) += mach-esr900.o > +obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o > +obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o > +obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
