Old OpenWrt releases were using network configs that are not valid anymore. They were specifying ports tagging in a different way (or were not tagging CPU at all) and were using VID 0 which is a reserved value.
Modifying network configuration to apply all needed changes would be pretty tricky. Script /etc/init.d/netconfig that generates new config is quite complex itself. So instead let's save the most important settings, regenerate config from the scratch and restore values. This should work for 99% of users. Signed-off-by: Rafał Miłecki <[email protected]> --- .../etc/uci-defaults/03_network_migration | 29 ++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 target/linux/brcm47xx/base-files/etc/uci-defaults/03_network_migration diff --git a/target/linux/brcm47xx/base-files/etc/uci-defaults/03_network_migration b/target/linux/brcm47xx/base-files/etc/uci-defaults/03_network_migration new file mode 100644 index 0000000..cef5add --- /dev/null +++ b/target/linux/brcm47xx/base-files/etc/uci-defaults/03_network_migration @@ -0,0 +1,29 @@ +#!/bin/sh +# +# Copyright (C) 2014 OpenWrt.org +# + +uci show network | grep "\.vlan=0" +[ $? -ne 0 ] && exit 0 + +logger -t network "network config is invalid, creating new one" + +local lan_proto="$(uci -q get network.lan.proto)" +local lan_ipaddr="$(uci -q get network.lan.ipaddr)" +local lan_netmask="$(uci -q get network.lan.netmask)" +local wan_proto="$(uci -q get network.wan.proto)" +local wan_ipaddr="$(uci -q get network.wan.ipaddr)" +local wan_netmask="$(uci -q get network.wan.netmask)" + +rm /etc/config/network +/etc/init.d/netconfig start + +uci set network.lan.proto=$lan_proto +uci set network.lan.ipaddr=$lan_ipaddr +uci set network.lan.netmask=$lan_netmask +uci set network.wan.proto=$wan_proto +uci set network.wan.ipaddr=$wan_ipaddr +uci set network.wan.netmask=$wan_netmask +uci commit network + +exit 0 -- 1.8.4.5 _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
