Hi, please make a patch that will default vid == vlan nr. this way we have a sane default hat user can override with higher vid if needed.
Thanks John On 01/07/2014 08:57, Xiongfei(Alex) GUO wrote: > hi, Roman, > > simply try these commands in OpenWrt, then the ethernet will start > to work. > > uci set network.@switch_vlan[0].vid=1 uci set > network.@switch_vlan[1].vid=2 uci commit /etc/init.d/network > restart > > BTW, I'm not sure my test is right, that I can see the wireless > driver start, but I cannot find any WIFI with SSID==OpenWrt. > > ---- > > hi, John, > > the problem here is, > > in old driver for mt7530, vid is always equal to vlan number. but > in new driver vid must be set explicitly. > > in most applications, user don't need to care about the difference > between vid and vlan. > > my solution for mt7530 driver is, when swconfig apply, if vid == > 0, then let vid = vlan (so vid==0 is valid). if you think it is ok, > i can send a patch about this. > > ---- > > Regards!~ > > Xiongfei (Alex) Guo Credo Semi. > > > On Tue, Jul 1, 2014 at 7:37 AM, Roman Yeryomin > <leroi.li...@gmail.com> wrote: >> On 1 July 2014 01:54, xf...@credosemi.com <xf...@credosemi.com> >> wrote: >>> can you just show the output of "swconfig dev switch0 show" ? >>> >>>> >>>> Also it appeared that ethernet is broken for mt7620n (didn't >>>> test other ramips targets) on trunk. Apparently after this >>>> (not sure how it's possible): >>>> https://dev.openwrt.org/changeset/41331 As `swconfig list' >>>> tells: Found: switch0 - mt7530 >>>> >> >> I don't have the board in hands right now but the other thing >> I've noticed that VID for both 1 and 2 vlans was 0. And setting >> it to correct values didn't have any effect. >> >> Regards, Roman > _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel