On 1 July 2014 19:12, Сергей Василюгин <vasilu...@yandex.ru> wrote: > > > 01.07.2014, 21:11, "Roman Yeryomin" <leroi.li...@gmail.com>: > > On 1 July 2014 13:57, John Crispin <j...@phrozen.org> wrote: > > Great, > > Roman can you test / confirm that this fixes the problem on rt-n14 ? i > don't have that unit myself so i cannot test. > > Yes, it fixes the default configuration. > But I still don't understand why I cannot change neither vid not member > ports: > > root@OpenWrt:/# swconfig dev switch0 vlan 1 show > VLAN 1: > vid: 1 > ports: 1 2 3 4 6t > root@OpenWrt:/# swconfig dev switch0 vlan 1 set ports '3 4 6t' > root@OpenWrt:/# swconfig dev switch0 vlan 1 show > VLAN 1: > vid: 1 > ports: 1 2 3 4 6t > > So is it broken or what? > Although I didn't check earlier versions it seems broken to me... > > Possibly you miss command > swconfig dev switch0 set apply > ??? > On my board vid is changed.
Apparently you didn't read my following post... Regards, Roman _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel