According to the thread https://forum.openwrt.org/viewtopic.php?id=48281 b53 uses GPIO 7: [ 4.470000] b53_common: [DBG] b53_switch_reset_gpio using 7 and causes device to self-reboot. GPIO 8 was found in CFE boot log: "Reset switch via GPIO 8 ..."
Signed-off-by: Rafał Miłecki <[email protected]> --- target/linux/generic/files/drivers/net/phy/b53/b53_priv.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/linux/generic/files/drivers/net/phy/b53/b53_priv.h b/target/linux/generic/files/drivers/net/phy/b53/b53_priv.h index ce5b530..d28e118 100644 --- a/target/linux/generic/files/drivers/net/phy/b53/b53_priv.h +++ b/target/linux/generic/files/drivers/net/phy/b53/b53_priv.h @@ -308,6 +308,8 @@ static inline int b53_switch_get_reset_gpio(struct b53_device *dev) enum bcm47xx_board board = bcm47xx_board_get(); switch (board) { + case BCM47XX_BOARD_LINKSYS_WRT300NV11: + return 8; case BCM47XX_BOARD_LINKSYS_WRT310NV1: return 8; default: -- 1.8.4.5 _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
