Hi, this patch is line broken.
what is the difference between this and the previous ? John On 19/07/2014 06:11, L. D. Pinney wrote: > > From: L. D. Pinney <ldpin...@gmail.com> > > This patch adds support for the Kingston Mobilelite Wireless > (MLW-221) > > http://wiki.openwrt.org/toh/kingston/mlw221 > > Signed-off-by: L. D. Pinney <ldpin...@gmail.com> > > --- diff --git a/target/linux/ramips/base-files/etc/diag.sh > b/target/linux/ramips/base-files/etc/diag.sh index 908547e..0887606 > 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ > b/target/linux/ramips/base-files/etc/diag.sh @@ -73,6 +73,9 @@ > get_status_led() { m4) status_led="m4:blue:status" ;; + mlw221) > + status_led="kingston:green:status" + ;; > mofi3500-3gn) status_led="mofi3500-3gn:green:status" ;; diff --git > a/target/linux/ramips/base-files/etc/uci-defaults/01_leds > b/target/linux/ramips/base-files/etc/uci-defaults/01_leds index > 19ec4f5..359281e 100755 --- > a/target/linux/ramips/base-files/etc/uci-defaults/01_leds +++ > b/target/linux/ramips/base-files/etc/uci-defaults/01_leds @@ -113,6 > +113,9 @@ case $board in hw550-3g) set_usb_led > "hw550-3g:green:usb" ;; + mlw221) + set_wifi_led > "kingston:blue:wifi" + ;; mofi3500-3gn) set_usb_led > "mofi3500-3gn:green:usb" ;; diff --git > a/target/linux/ramips/base-files/etc/uci-defaults/02_network > b/target/linux/ramips/base-files/etc/uci-defaults/02_network index > b54b555..c6a4609 100755 --- > a/target/linux/ramips/base-files/etc/uci-defaults/02_network +++ > b/target/linux/ramips/base-files/etc/uci-defaults/02_network @@ > -49,6 +49,10 @@ ramips_setup_interfaces() ucidef_set_interface_lan > "eth0" ;; > > + mlw221) + ucidef_set_interfaces_lan_wan "eth0.1" > "eth0.2" + ;; + 3g-6200nl | \ wl-330n | \ wmr300) diff --git > a/target/linux/ramips/base-files/lib/ramips.sh > b/target/linux/ramips/base-files/lib/ramips.sh index > f9ab1e3..71cdd47 100755 --- > a/target/linux/ramips/base-files/lib/ramips.sh +++ > b/target/linux/ramips/base-files/lib/ramips.sh @@ -157,6 +157,9 @@ > ramips_board_detect() { *"HAME MPR-A2") name="mpr-a2" ;; + > *"Kingston MLW221") + name="mlw221" + ;; *"Planex > MZK-750DHP") name="mzk-750dhp" ;; diff --git > a/target/linux/ramips/base-files/lib/upgrade/platform.sh > b/target/linux/ramips/base-files/lib/upgrade/platform.sh index > 8ada58b..5dec7f8 100755 --- > a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ > b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -54,6 > +54,7 @@ platform_check_image() { ip2202 | \ m3 | \ m4 | \ + > mlw221 | \ mofi3500-3gn | \ mpr-a1 | \ mpr-a2 | \ diff --git > a/target/linux/ramips/image/Makefile > b/target/linux/ramips/image/Makefile index c7225a6..3a0fe9d 100644 > --- a/target/linux/ramips/image/Makefile +++ > b/target/linux/ramips/image/Makefile @@ -737,6 +737,7 @@ endif # > MT7620N Profiles # > > +Image/Build/Profile/MLW221=$(call > BuildFirmware/Default16M/$(1),$(1),mlw221,MLW221) > Image/Build/Profile/WMR300=$(call > BuildFirmware/Default8M/$(1),$(1),wmr-300,WMR300) > Image/Build/Profile/RT-N14U=$(call > BuildFirmware/Default8M/$(1),$(1),rt-n14u,RT-N14U) > Image/Build/Profile/WR8305RT=$(call > BuildFirmware/Default8M/$(1),$(1),wr8305rt,WR8305RT) @@ -745,6 > +746,7 @@ Image/Build/Profile/ZBT-WA05=$(call > BuildFirmware/Default8M/$(1),$(1),zbt-wa05,Z > > ifeq ($(SUBTARGET),mt7620n) define Image/Build/Profile/Default + > $(call Image/Build/Profile/MLW221,$(1)) $(call > Image/Build/Profile/WMR300,$(1)) $(call > Image/Build/Profile/RT-N14U,$(1)) $(call > Image/Build/Profile/WR8305RT,$(1)) diff --git > a/target/linux/ramips/dts/MLW221.dts > b/target/linux/ramips/dts/MLW221.dts new file mode 100644 index > 0000000..15fde52 100644 --- a/target/linux/ramips/dts/MLW221.dts > +++ b/target/linux/ramips/dts/MLW221.dts @@ -0,0 +1,118 @@ > +/dts-v1/; + +/include/ "mt7620n.dtsi" + +/ { + compatible = > "mlw221", "ralink,mt7620n-soc"; + model = "Kingston MLW221"; > + + palmbus@10000000 { + gpio0: gpio@600 { + > status = "okay"; + }; + + gpio2: > gpio@660 { + status = "okay"; + > }; + + gpio3: gpio@688 { + > status = "okay"; + }; + + spi@b00 { + > status = "okay"; + + m25p80@0 { + > #address-cells = <1>; + #size-cells = > <1>; + compatible = "s25fl129p1"; + > reg = <0 0>; + linux,modalias = > "m25p80", "s25fl129p1"; + > spi-max-frequency = <10000000>; + + > partition@0 { + label = > "u-boot"; + reg = <0x0 > 0x30000>; + read-only; + > }; + + partition@30000 { + > label = "u-boot-env"; + reg = > <0x30000 0x10000>; + > read-only; + }; + + > factory: partition@40000 { + > label = "factory"; + reg = > <0x40000 0x10000>; + > read-only; + }; + + > partition@50000 { + label = > "firmware"; + reg = <0x50000 > 0xf60000>; + }; + + > partition@fb0000 { + label = > "user-config"; + reg = > <0xfb0000 0x50000>; + + }; + > }; + }; + }; + + ehci@101c0000 { + > status = "okay"; + }; + + ohci@101c1000 { + > status = "okay"; + }; + + ethernet@10100000 { + > mtd-mac-address = <&factory 0x4>; + ralink,port-map = > "llllw"; + }; + + wmac@10180000 { + > ralink,mtd-eeprom = <&factory 0>; + }; + + pinctrl { + > state_default: pinctrl0 { + default { + > ralink,group = "i2c", "ephy", "wled"; + > ralink,function = "gpio"; + }; + > }; + }; + + gpio-leds { + compatible = > "gpio-leds"; + system { + label > = "kingston:blue:system"; + gpios = <&gpio2 3 > 1>; + }; + wifi { + > label = "kingston:blue:wifi"; + gpios = > <&gpio3 0 1>; + }; + }; + + > gpio-keys-polled { + compatible = > "gpio-keys-polled"; + #address-cells = <1>; + > #size-cells = <0>; + poll-interval = <20>; + > reset { + label = "reset"; + > gpios = <&gpio0 1 1>; + linux,code = > <0x198>; + }; + system { + > label = "system"; + gpios = <&gpio0 2 1>; + > }; + }; +}; > > > _______________________________________________ openwrt-devel > mailing list openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel