On 07/20/2014 10:58 AM, Maarten Bezemer wrote: > Update the kernel of the orion target to version 3.10.44. > Refresh orion config and patches to match the changes in the kernel > > Tested on WRT350N-v2 device. > > Signed-off-by: Maarten Bezemer <maarten.beze...@gmail.com> > --- > Makefile | 2 +- > config-default | 2 ++ > files/arch/arm/mach-orion5x/dt2-setup.c | 2 +- > patches/200-dt2_board_support.patch | 4 ++-- > patches/210-wn802t_support.patch | 10 +++++----- > patches/400-fix-section-mismatch-warnings.patch | 22 +--------------------- > patches/a01-dt2-fixes-for-3.3.patch | 2 +- > 7 files changed, 13 insertions(+), 31 deletions(-) >
Hi, I am getting an error when compiling: /home/hauke/openwrt/git/staging_dir/host/bin/mkfs.jffs2 --compression-mode=none --pad --little-endian --squash -e 64KiB -o '/home/hauke/openwrt/git/build_dir/target-arm_xscale_uClibc-0.9.33.2_eabi/linux-orion_generic/wn802t-uImage.jffs2' -d '/home/hauke/openwrt/git/tmp/wn802t_jffs2_uimage' rm -rf '/home/hauke/openwrt/git/tmp/wn802t_jffs2_uimage' [ `stat -c %s '/home/hauke/openwrt/git/build_dir/target-arm_xscale_uClibc-0.9.33.2_eabi/linux-orion_generic/wn802t-uImage.jffs2'` -le 1048576 ] || { echo ' ERROR: /home/hauke/openwrt/git/build_dir/target-arm_xscale_uClibc-0.9.33.2_eabi/linux-orion_generic/wn802t-uImage.jffs2 too big (> 1048576 bytes)'; exit 1; } ERROR: /home/hauke/openwrt/git/build_dir/target-arm_xscale_uClibc-0.9.33.2_eabi/linux-orion_generic/wn802t-uImage.jffs2 too big (> 1048576 bytes) make[5]: *** [install] Error 1 You could try to move the ethernet controller and switch driver into a kernel module to make the kernel image smaller. Hauke _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel