[OpenWrt-Devel] [PATCH]ramips:support Lenovo AC1200 Wireless router

Lintel Huang Thu, 24 Jul 2014 07:05:03 -0700

Today, Lenovo released a new product，an 11ac wireless router base MTK's
mt7620a + mt7612e evaluation board.
It has Two GE ports(RTL8211E) and 4 FE ports(Internal switch),256MByte
DDR2, 3xUSB 2.0.
This patch will make openwrt support it.


Sorry for my pool english,tks at all.

Regards, Lintel

Signed-off-by:Lintel<lintel.hu...@gmail.com>

diff --git a/target/linux/ramips/base-files/etc/diag.sh
b/target/linux/ramips/base-files/etc/diag.sh
index 908547e..edebed8 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -182,6 +182,9 @@ get_status_led() {
     na930)
         status_led="na930:blue:power"
         ;;
+    ac1200)
+        status_led="lenovo:blue:power"
+        ;;
     esac
 }

diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network
b/target/linux/ramips/base-files/etc/uci-defaults/02_network
index b372893..b862d9c 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network
@@ -172,6 +172,12 @@ ramips_setup_interfaces()
         ucidef_add_switch_vlan "switch0" "2" "4 6t"
         ;;

+    ac1200)
+        ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+        ucidef_add_switch "switch0" "1" "1"
+        ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5 6t"
+        ucidef_add_switch_vlan "switch0" "2" "0 6t"
+        ;;
     d105 | \
     na930 | \
     omni-emb-hpm|\
@@ -254,7 +260,8 @@ ramips_setup_macs()
         wan_mac=$(macaddr_add "$lan_mac" 1)
         ;;

-    wr8305rt)
+    wr8305rt | \
+    ac1200)
         lan_mac=$(mtd_get_mac_binary factory 4)
         wan_mac=$(macaddr_add "$lan_mac" 1)
         ;;
diff --git a/target/linux/ramips/base-files/lib/ramips.sh
b/target/linux/ramips/base-files/lib/ramips.sh
index f9ab1e3..9a339b1 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -313,6 +313,9 @@ ramips_board_detect() {
     *"ZBT WR8305RT")
         name="wr8305rt"
         ;;
+    *"Lenovo AC1200")
+        name="ac1200"
+        ;;
     *)
         name="generic"
         ;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh
b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 8ada58b..a5a63ae 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -93,7 +93,8 @@ platform_check_image() {
     wrtnode |\
     x5 |\
     x8 |\
-    zbt-wa05)
+    zbt-wa05 |\
+    ac1200)
         [ "$magic" != "27051956" ] && {
             echo "Invalid image type."
             return 1
diff --git a/target/linux/ramips/image/Makefile
b/target/linux/ramips/image/Makefile
index ef019ef..79e1787 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -716,6 +716,7 @@ Image/Build/Profile/DIR-810L=$(call
BuildFirmware/CustomFlash/$(1),$(1),dir-810l
 na930_mtd_size=20971520
 Image/Build/Profile/NA930=$(call
BuildFirmware/CustomFlash/$(1),$(1),na930,NA930,$(na930_mtd_size))
 Image/Build/Profile/MZK-750DHP=$(call
BuildFirmware/Default8M/$(1),$(1),mzk-750dhp,MZK-750DHP)
+Image/Build/Profile/AC1200=$(call
BuildFirmware/Default16M/$(1),$(1),ac1200,AC1200)

 ifeq ($(SUBTARGET),mt7620a)
 define Image/Build/Profile/Default
@@ -730,6 +731,7 @@ define Image/Build/Profile/Default
     $(call Image/Build/Profile/WHR1166D,$(1))
     $(call Image/Build/Profile/MZK-750DHP,$(1))
     $(call Image/Build/Profile/NA930,$(1))
+    $(call Image/Build/Profile/AC1200,$(1))
 endef
 endif

diff --git a/target/linux/ramips/mt7620a/config-3.10
b/target/linux/ramips/mt7620a/config-3.10
index 6805dd9..50e0a55 100644
--- a/target/linux/ramips/mt7620a/config-3.10
+++ b/target/linux/ramips/mt7620a/config-3.10
@@ -1,6 +1,7 @@
 CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
 CONFIG_ARCH_DISCARD_MEMBLOCK=y
 CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAS_RESET_CONTROLLER=y
 CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
@@ -78,6 +79,7 @@ CONFIG_HAVE_PERF_EVENTS=y
 CONFIG_HW_HAS_PCI=y
 CONFIG_HW_RANDOM=m
 CONFIG_HZ_PERIODIC=y
+CONFIG_ICPLUS_PHY=y
 CONFIG_IMAGE_CMDLINE_HACK=y
 CONFIG_INET_LRO=y
 CONFIG_INITRAMFS_SOURCE=""
@@ -88,6 +90,7 @@ CONFIG_IRQ_FORCED_THREADING=y
 CONFIG_IRQ_INTC=y
 CONFIG_IRQ_WORK=y
 CONFIG_M25PXX_USE_FAST_READ=y
+CONFIG_MARVELL_PHY=y
 CONFIG_MDIO_BOARDINFO=y
 # CONFIG_MII is not set
 CONFIG_MIPS=y
@@ -138,7 +141,9 @@ CONFIG_PINMUX=y
 CONFIG_RALINK=y
 CONFIG_RALINK_USBPHY=y
 CONFIG_RALINK_WDT=y
+CONFIG_RA_NAT_NONE=y
 # CONFIG_RCU_STALL_COMMON is not set
+CONFIG_REALTEK_PHY=y
 CONFIG_RESET_CONTROLLER=y
 # CONFIG_SAMSUNG_USB2PHY is not set
 # CONFIG_SAMSUNG_USB3PHY is not set

diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 908547e..edebed8 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -182,6 +182,9 @@ get_status_led() {
 	na930)
 		status_led="na930:blue:power"
 		;;
+	ac1200)
+		status_led="lenovo:blue:power"
+		;;
 	esac
 }
 
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network
index b372893..b862d9c 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network
@@ -172,6 +172,12 @@ ramips_setup_interfaces()
 		ucidef_add_switch_vlan "switch0" "2" "4 6t"
 		;;
 
+	ac1200)
+		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+		ucidef_add_switch "switch0" "1" "1"
+		ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5 6t"
+		ucidef_add_switch_vlan "switch0" "2" "0 6t"
+		;;
 	d105 | \
 	na930 | \
 	omni-emb-hpm|\
@@ -254,7 +260,8 @@ ramips_setup_macs()
 		wan_mac=$(macaddr_add "$lan_mac" 1)
 		;;
 
-	wr8305rt)
+	wr8305rt | \
+	ac1200)
 		lan_mac=$(mtd_get_mac_binary factory 4)
 		wan_mac=$(macaddr_add "$lan_mac" 1)
 		;;
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index f9ab1e3..9a339b1 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -313,6 +313,9 @@ ramips_board_detect() {
 	*"ZBT WR8305RT")
 		name="wr8305rt"
 		;;
+	*"Lenovo AC1200")
+		name="ac1200"
+		;;
 	*)
 		name="generic"
 		;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 8ada58b..a5a63ae 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -93,7 +93,8 @@ platform_check_image() {
 	wrtnode |\
 	x5 |\
 	x8 |\
-	zbt-wa05)
+	zbt-wa05 |\
+	ac1200)
 		[ "$magic" != "27051956" ] && {
 			echo "Invalid image type."
 			return 1
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index ef019ef..79e1787 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -716,6 +716,7 @@ Image/Build/Profile/DIR-810L=$(call BuildFirmware/CustomFlash/$(1),$(1),dir-810l
 na930_mtd_size=20971520
 Image/Build/Profile/NA930=$(call BuildFirmware/CustomFlash/$(1),$(1),na930,NA930,$(na930_mtd_size))
 Image/Build/Profile/MZK-750DHP=$(call BuildFirmware/Default8M/$(1),$(1),mzk-750dhp,MZK-750DHP)
+Image/Build/Profile/AC1200=$(call BuildFirmware/Default16M/$(1),$(1),ac1200,AC1200)
 
 ifeq ($(SUBTARGET),mt7620a)
 define Image/Build/Profile/Default
@@ -730,6 +731,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/WHR1166D,$(1))
 	$(call Image/Build/Profile/MZK-750DHP,$(1))
 	$(call Image/Build/Profile/NA930,$(1))
+	$(call Image/Build/Profile/AC1200,$(1))
 endef
 endif
 
diff --git a/target/linux/ramips/mt7620a/config-3.10 b/target/linux/ramips/mt7620a/config-3.10
index 6805dd9..50e0a55 100644
--- a/target/linux/ramips/mt7620a/config-3.10
+++ b/target/linux/ramips/mt7620a/config-3.10
@@ -1,6 +1,7 @@
 CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
 CONFIG_ARCH_DISCARD_MEMBLOCK=y
 CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAS_RESET_CONTROLLER=y
 CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
@@ -78,6 +79,7 @@ CONFIG_HAVE_PERF_EVENTS=y
 CONFIG_HW_HAS_PCI=y
 CONFIG_HW_RANDOM=m
 CONFIG_HZ_PERIODIC=y
+CONFIG_ICPLUS_PHY=y
 CONFIG_IMAGE_CMDLINE_HACK=y
 CONFIG_INET_LRO=y
 CONFIG_INITRAMFS_SOURCE=""
@@ -88,6 +90,7 @@ CONFIG_IRQ_FORCED_THREADING=y
 CONFIG_IRQ_INTC=y
 CONFIG_IRQ_WORK=y
 CONFIG_M25PXX_USE_FAST_READ=y
+CONFIG_MARVELL_PHY=y
 CONFIG_MDIO_BOARDINFO=y
 # CONFIG_MII is not set
 CONFIG_MIPS=y
@@ -138,7 +141,9 @@ CONFIG_PINMUX=y
 CONFIG_RALINK=y
 CONFIG_RALINK_USBPHY=y
 CONFIG_RALINK_WDT=y
+CONFIG_RA_NAT_NONE=y
 # CONFIG_RCU_STALL_COMMON is not set
+CONFIG_REALTEK_PHY=y
 CONFIG_RESET_CONTROLLER=y
 # CONFIG_SAMSUNG_USB2PHY is not set
 # CONFIG_SAMSUNG_USB3PHY is not set

AC1200.dts
Description: Binary data

_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel

[OpenWrt-Devel] [PATCH]ramips:support Lenovo AC1200 Wireless router

Reply via email to