The OpenMesh MR600(v1) can only enable the 2.4G WiFi PHY LED through the mini-PCIe device. Not configuring the LED pin inside the platform data makes it impossible to configure it through any standard OpenWrt tool.
Signed-off-by: Sven Eckelmann <[email protected]> --- Resent because openwrt mailing list rejected first mail. target/linux/ar71xx/files/arch/mips/ath79/mach-mr600.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr600.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mr600.c index 4969564..701330c 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr600.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-mr600.c @@ -164,6 +164,7 @@ static void __init mr600_base_setup(unsigned num_leds, struct gpio_led *leds) static void __init mr600_setup(void) { mr600_base_setup(ARRAY_SIZE(mr600_leds_gpio), mr600_leds_gpio); + ap9x_pci_setup_wmac_led_pin(0, 0); } MIPS_MACHINE(ATH79_MACH_MR600, "MR600", "OpenMesh MR600", mr600_setup); -- 2.1.0.rc1 _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
