I installed this: [user@localhost openwrt]$ md5sum * 65111512db032e42b581a2041c63d816 openwrt-wnr1000_v3-squashfs.chk [user@localhost openwrt]$
but now the Power light on the router is Orange. It doesn't turn to green. I connected to LAN port 4, the port lights up to green. But I do not get an IP automatically assigned to my PC. I tried manually assigning my PC IP 192.168.1.125 and gateway 192.168.1.1 telnet / ssh does not work. [user@localhost ~]$ telnet 192.168.1.1 Trying 192.168.1.1... telnet: connect to address 192.168.1.1: No route to host [user@localhost ~]$ telnet 192.168.100.1 Trying 192.168.100.1... telnet: connect to address 192.168.100.1: No route to host [user@localhost ~]$ telnet 192.168.100.1 Trying 192.168.100.1... telnet: connect to address 192.168.100.1: No route to host [user@localhost ~]$ telnet 192.168.0.1 Trying 192.168.0.1... telnet: connect to address 192.168.0.1: No route to host [user@localhost ~]$ This is my first time using Open WRT so I am hoping I have not bricked it. On Fri, Aug 15, 2014 at 6:42 AM, Rafał Miłecki <[email protected]> wrote: > On 14 August 2014 07:48, Rafał Miłecki <[email protected]> wrote: >> On 14 August 2014 05:46, quickbooks office <[email protected]> >> wrote: >>> Is it possible to install Open WRT on Netgear WNR1000 v3 N150 without >>> opening the box up? >> >> (...) >> >> OpenWrt build bots should start generating firmware for your device in >> few next days. > > You can give it a try: > https://downloads.openwrt.org/snapshots/trunk/brcm47xx.mips74k/ _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
