I reflashed a whole new binary and it worked.
发件人: Yousong Zhou [mailto:[email protected]] 发送时间: 2014年9月22日 22:36 收件人: swigger 抄送: Weijie Gao; OpenWrt Development List; [email protected]; [email protected] 主题: Re: 答复: [PATCH] ar71xx: qihoo-c301: reset imageNtrynum after each successful boot. hi, swigger On Sep 22, 2014 10:04 PM, "swigger" <[email protected]> wrote: > > It does NOT run on my router. > > root@OpenWrt:~# cat /etc/config/ubootenv > config ubootenv > option dev '/dev/mtd9' > option offset '0x0' > option envsize '0x10000' > option secsize '0x10000' > root@OpenWrt:~# fw_printenv > Cannot parse config file: No such file or directory > > What's wrong? i am not sure. if /e/c/ubootenv was generated, so should be /etc/fw_env.config. was this ubootenv created by you manually or generated by script in uci-defaults during first boot after the fresh installation? anyway, it should work if /etc/fw_env.config was created correctly. regards yousong > > > -----邮件原件----- > 发件人: Yousong Zhou [mailto:[email protected]] > 发送时间: 2014年9月14日 8:28 > 收件人: [email protected] > 抄送: [email protected]; [email protected]; [email protected]; > [email protected]; Yousong Zhou > 主题: [PATCH] ar71xx: qihoo-c301: reset imageNtrynum after each successful > boot. > > Qihoo C301 has 2 flash chips of which one is used as primary and the other > is used as backup. OEM U-Boot will try to boot an activeregion N with > imageNstatus=0 and imageNtrynum <= imagemaxtry. If such a region is found, > bootloader will try to increment imageNtrynum and boot it. > > This patch tries to reset imageNtrynum after each successful boot (if the > boot process reaches the execution of /etc/init.d/done). > > root@OpenWrt:/# hexdump -C -n 128 /dev/mtdblock9 > 00000000 9e f3 63 91 61 63 74 69 76 65 72 65 67 69 6f 6e > |..c.activeregion| > 00000010 3d 31 00 69 6d 61 67 65 31 73 74 61 74 75 73 3d > |=1.image1status=| > 00000020 30 00 69 6d 61 67 65 32 73 74 61 74 75 73 3d 30 > |0.image2status=0| > 00000030 00 69 6d 61 67 65 32 74 72 79 6e 75 6d 3d 30 00 > |.image2trynum=0.| > 00000040 69 6d 61 67 65 6d 61 78 74 72 79 3d 33 00 69 6d > |imagemaxtry=3.im| > 00000050 61 67 65 31 74 72 79 6e 75 6d 3d 30 00 00 00 00 > |age1trynum=0....| > 00000060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > |................| > > Signed-off-by: Yousong Zhou <[email protected]> > --- > package/boot/uboot-envtools/files/ar71xx | 3 +++ > target/linux/ar71xx/base-files/etc/diag.sh | 6 ++++++ > 2 files changed, 9 insertions(+) > > diff --git a/package/boot/uboot-envtools/files/ar71xx > b/package/boot/uboot-envtools/files/ar71xx > index 5deed9c..f660883 100644 > --- a/package/boot/uboot-envtools/files/ar71xx > +++ b/package/boot/uboot-envtools/files/ar71xx > @@ -41,6 +41,9 @@ om2p-lc) > wzr-hp-ag300h) > ubootenv_add_uci_config "/dev/mtd3" "0x0" "0x10000" "0x10000" > ;; > +qihoo-c301) > + ubootenv_add_uci_config "/dev/mtd9" "0x0" "0x10000" "0x10000" > + ;; > esac > > config_load ubootenv > diff --git a/target/linux/ar71xx/base-files/etc/diag.sh > b/target/linux/ar71xx/base-files/etc/diag.sh > index ac7e20d..c7c6233 100755 > --- a/target/linux/ar71xx/base-files/etc/diag.sh > +++ b/target/linux/ar71xx/base-files/etc/diag.sh > @@ -294,6 +294,12 @@ set_state() { > ;; > done) > status_led_on > + case $(ar71xx_board_name) in > + qihoo-c301) > + local n=$(fw_printenv activeregion | cut -d = -f 2) > + fw_setenv "image${n}trynum" 0 > + ;; > + esac > ;; > esac > } > -- > 1.7.10.4 > >
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
