Maybe you have one of these new Loco M5 XW? Support for that device has been added with r42549 (9 days ago) [1] and is only available in current trunk (unfortunately not in barrier breaker rc3).
Regards Nico [1] http://git.openwrt.org/?p=openwrt.git;a=commit;h=3d217029ea89de6520e01a471b6dc31924f17327 Am 24.09.2014 um 18:21 schrieb Bill: > I just got 5 LOCO M5 units that won't run OpenWRT. They are datestamped > 1422K; when I try to flash them, they give me: > > received ERROR <code=2, msg=Firmware check failed> > > I am using the Bullet M image > (openwrt-ar71xx-generic-ubnt-bullet-m-squashfs-factory.bin), flashing > with tftp in binary mode. > > I have one other LOCO M5 with datestamp 1340K that works fine - flashes > fine every time. But the new units won't take the firmware at all. > > I assume UBNT did something in the bootloader that is disabling OpenWRT. > > Any help will be welcome. I can open one up and attach a serial cable, > but I'm not sure what I'd look for or what I'd do about it... > > Thanks, > > Bill > _______________________________________________ > openwrt-devel mailing list > [email protected] > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
signature.asc
Description: OpenPGP digital signature
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
