[email protected] schrieb am 26.09.2014 12:46: > The DHT11 is a temperature and humidity sensor supported by linux > since 3.14. > > This patch has been tested on recent mxs with kernel 3.14.18. > > Signed-off-by: Harald Geyer <[email protected]> Hi, I would expect to make it also depend on device tree or architectures which support device tree. From what I remember, there are still architectures which have not yet been converted to devicetree. In those cases, it would be confusing and useless to build this module. Or am I missing something? I don't have any practical experience with devicetree, so far.
> --- > package/kernel/linux/modules/other.mk | 20 ++++++++++++++++++++ > 1 files changed, 20 insertions(+), 0 deletions(-) > > diff --git a/package/kernel/linux/modules/other.mk > b/package/kernel/linux/modules/other.mk > index d56bb50..bef24eb 100644 > --- a/package/kernel/linux/modules/other.mk > +++ b/package/kernel/linux/modules/other.mk > @@ -258,6 +258,26 @@ endef > > $(eval $(call KernelPackage,iio-ad799x)) > > + > +define KernelPackage/iio-dht11 > + SUBMENU:=$(OTHER_MENU) > + DEPENDS:=kmod-iio-core @GPIO_SUPPORT > + TITLE:=DHT11 (and compatible) humidity and temperature sensors > + KCONFIG:= \ > + CONFIG_DHT11 > + FILES:=$(LINUX_DIR)/drivers/iio/humidity/dht11.ko > + AUTOLOAD:=$(call AutoLoad,56,dht11) > +endef > + > +define KernelPackage/iio-dht11/description > + support for DHT11 and DHT22 digitial humidity and temperature sensors > + attached at GPIO lines. You will need a custom device tree file to > + specify the GPIO line to use. > +endef > + > +$(eval $(call KernelPackage,iio-dht11)) > + > + > define KernelPackage/lp > SUBMENU:=$(OTHER_MENU) > TITLE:=Parallel port and line printer support > _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
