Hi to all, by manually setting correcly gpio like on original board with devmem:
root@OpenWrt:/# /etc/init.d/tapidemo start eth1 ITM version 0.0.0.27. Compiled for EASY80910 with FXO (Slic121). Filesystem firmware binary used (/lib/firmware/voice_ar9_firmware.bin). VMMC [version 0x 0, type 0x 7, channels 2] ready! FW Version 2.1 VMMC Driver version 1.9.0.3 Using board EASY80910 with: - CID support: ETSI FSK, Europe (standard 1). - VAD support: IFX_TAPI_ENC_VAD_NOVAD - no voice activity detection. - LEC support: IFX_TAPI_WLEC_TYPE_NE - LEC using fixed window. No Echo Suppressor. - Debug level: HIGH. - Transparent fax/modem and T.38 transmission support. Dialing sequences for different call types: a) Local connection: <c> b) Extern connection: <0iiic> c) PCM connection: <09iiic> d) FXO connection: <05d> e) FEATURE selection first digit must be 'STAR (*), afterthat feature number (4 digits). f) CONFERENCING first digit must be 'HASH (#)', afterthat normal dialing sequence, g) Extern connection with full ip: <0*xxx*xxx*xxx*xxx*dcc> - each part separated with STAR (*), Legend: <c> - channel number started from 1 (1 means channel 0). <iii> - lowest part of external board IP address (a.b.c.<iii>) <d> - FXO channel, started from 1 (1 means channel 0). <xxx*xxx*xxx*xxx> - external board IP address (xxx.xxx.xxx.xxx) FXS channels calling table: ------------------------------------------------ | Dial | Board | Phone channel | |------------------------------------------------| | 1 | EASY80910 | 0 | | 2 | EASY80910 | 1 | ------------------------------------------------ Stay tuned... (for the moment watchdog disabled, like has ben done on falcon patches) Regards Eddi _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel