Support for the Linksys EA3500. Here's the patch, and I entered the basic device info (including the serial console connections) on the wiki at http://wiki.openwrt.org/toh/linksys/ea3500 . Hope it can be of use to someone else, I know I've been waiting a long while to run OpenWRT on my router!
-Dan Signed-off-by: Dan Walters <[email protected]> --- package/boot/uboot-envtools/files/kirkwood | 1 + .../kirkwood/base-files/etc/uci-defaults/01_leds | 3 + .../base-files/etc/uci-defaults/02_network | 3 + target/linux/kirkwood/base-files/lib/kirkwood.sh | 4 + target/linux/kirkwood/image/Makefile | 3 + .../linux/kirkwood/patches-3.14/170-ea3500.patch | 164 +++++++++++++++++++++ target/linux/kirkwood/profiles/115-router.mk | 16 ++ 7 files changed, 194 insertions(+) create mode 100644 target/linux/kirkwood/patches-3.14/170-ea3500.patch diff --git a/package/boot/uboot-envtools/files/kirkwood b/package/boot/uboot-envtools/files/kirkwood index ef6c113..b15b8f9 100644 --- a/package/boot/uboot-envtools/files/kirkwood +++ b/package/boot/uboot-envtools/files/kirkwood @@ -14,6 +14,7 @@ touch /etc/config/ubootenv board=$(kirkwood_board_name) case "$board" in +"ea3500" | \ "ea4500" | \ "ib62x0" | \ "pogo_e02") diff --git a/target/linux/kirkwood/base-files/etc/uci-defaults/01_leds b/target/linux/kirkwood/base-files/etc/uci-defaults/01_leds index 07c1a0e..41191f7 100644 --- a/target/linux/kirkwood/base-files/etc/uci-defaults/01_leds +++ b/target/linux/kirkwood/base-files/etc/uci-defaults/01_leds @@ -13,6 +13,9 @@ case "$board" in ucidef_set_led_default "health" "status:green:health" "1" ucidef_set_led_default "fault" "status:orange:fault" "1" ;; +"ea3500") + ucidef_set_led_default "power" "ea3500:green:power" "1" + ;; "ea4500") ucidef_set_led_default "health" "ea4500:white:health" "1" ucidef_set_led_default "pulse" "ea4500:white:pulse" "1" diff --git a/target/linux/kirkwood/base-files/etc/uci-defaults/02_network b/target/linux/kirkwood/base-files/etc/uci-defaults/02_network index e795d65..bc7e793 100644 --- a/target/linux/kirkwood/base-files/etc/uci-defaults/02_network +++ b/target/linux/kirkwood/base-files/etc/uci-defaults/02_network @@ -40,6 +40,9 @@ case "$board" in "pogo_e02") set_lan_dhcp "eth0" ;; +"ea3500") + ucidef_set_interfaces_lan_wan "eth0" "eth1" + ;; "ea4500") ucidef_set_interfaces_lan_wan "eth0" "eth1" ;; diff --git a/target/linux/kirkwood/base-files/lib/kirkwood.sh b/target/linux/kirkwood/base-files/lib/kirkwood.sh index ba080f4..323a997 100755 --- a/target/linux/kirkwood/base-files/lib/kirkwood.sh +++ b/target/linux/kirkwood/base-files/lib/kirkwood.sh @@ -29,6 +29,10 @@ kirkwood_board_detect() { name="pogo_e02" ;; + "Linksys EA3500") + name="ea3500" + ;; + "Linksys EA4500") name="ea4500" ;; diff --git a/target/linux/kirkwood/image/Makefile b/target/linux/kirkwood/image/Makefile index e3c6f0b..3852cac 100644 --- a/target/linux/kirkwood/image/Makefile +++ b/target/linux/kirkwood/image/Makefile @@ -117,6 +117,9 @@ Image/InstallKernel/Template/Generic=$(call Image/InstallKernel/Template) Image/BuildKernel/Template/DOCKSTAR=$(call Image/BuildKernel/Template,dockstar) Image/InstallKernel/Template/DOCKSTAR=$(call Image/InstallKernel/Template,dockstar) +Image/BuildKernel/Template/EA3500=$(call Image/BuildKernel/Template,ea3500) +Image/InstallKernel/Template/EA3500=$(call Image/InstallKernel/Template,ea3500) + Image/BuildKernel/Template/EA4500=$(call Image/BuildKernel/Template,ea4500) Image/InstallKernel/Template/EA4500=$(call Image/InstallKernel/Template,ea4500) diff --git a/target/linux/kirkwood/patches-3.14/170-ea3500.patch b/target/linux/kirkwood/patches-3.14/170-ea3500.patch new file mode 100644 index 0000000..155d9fc --- /dev/null +++ b/target/linux/kirkwood/patches-3.14/170-ea3500.patch @@ -0,0 +1,164 @@ +diff -ruN a/arch/arm/boot/dts/kirkwood-ea3500.dts b/arch/arm/boot/dts/kirkwood-ea3500.dts +--- a/arch/arm/boot/dts/kirkwood-ea3500.dts 1969-12-31 19:00:00.000000000 -0500 ++++ b/arch/arm/boot/dts/kirkwood-ea3500.dts 2014-10-13 15:13:15.695625124 -0500 +@@ -0,0 +1,149 @@ ++/* ++ * kirkwood-ea3500.dts - Device Tree file for Linksys EA3500 ++ * ++ * (c) 2013 Jonas Gorski <[email protected]> ++ * (c) 2013 Deutsche Telekom Innovation Laboratories ++ * (c) 2014 Luka Perkov <[email protected]> ++ * (c) 2014 Dan Walters <[email protected]> ++ * ++ * This file is licensed under the terms of the GNU General Public ++ * License version 2. This program is licensed "as is" without any ++ * warranty of any kind, whether express or implied. ++ */ ++ ++/dts-v1/; ++ ++#include "kirkwood.dtsi" ++#include "kirkwood-6282.dtsi" ++ ++/ { ++ model = "Linksys EA3500"; ++ compatible = "linksys,ea3500", "marvell,kirkwood-88f6282", "marvell,kirkwood"; ++ ++ memory { ++ device_type = "memory"; ++ reg = <0x00000000 0x4000000>; ++ }; ++ ++ chosen { ++ bootargs = "console=ttyS0,115200n8 earlyprintk"; ++ }; ++ ++ mbus { ++ pcie-controller { ++ status = "okay"; ++ ++ pcie@1,0 { ++ status = "okay"; ++ }; ++ ++ pcie@2,0 { ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ ocp@f1000000 { ++ pinctrl: pinctrl@10000 { ++ pmx_led_green_power: pmx-led-green-power { ++ marvell,pins = "mpp7"; ++ marvell,function = "gpo"; ++ }; ++ pmx_btn_wps: pmx-btn-wps { ++ marvell,pins = "mpp47"; ++ marvell,function = "gpio"; ++ }; ++ pmx_btn_reset: pmx-btn-reset { ++ marvell,pins = "mpp48"; ++ marvell,function = "gpio"; ++ }; ++ }; ++ ++ rtc@10300 { ++ status = "disabled"; ++ }; ++ ++ serial@12000 { ++ status = "okay"; ++ }; ++ ++ }; ++ ++ gpio_keys { ++ compatible = "gpio-keys"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >; ++ pinctrl-names = "default"; ++ ++ button@15 { ++ label = "WPS Button"; ++ linux,code = <KEY_WPS_BUTTON>; ++ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; ++ }; ++ ++ button@16 { ++ label = "Reset Button"; ++ linux,code = <KEY_RESTART>; ++ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ gpio-leds { ++ compatible = "gpio-leds"; ++ pinctrl-0 = < &pmx_led_green_power >; ++ pinctrl-names = "default"; ++ ++ green-power { ++ label = "ea3500:green:power"; ++ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; ++ }; ++ }; ++}; ++ ++&nand { ++ status = "okay"; ++ pinctrl-0 = <&pmx_nand>; ++ pinctrl-names = "default"; ++ ++ partition@0 { ++ label = "u-boot"; ++ reg = <0x0000000 0x80000>; ++ read-only; ++ }; ++ ++ partition@80000 { ++ label = "u-boot environment"; ++ reg = <0x80000 0x20000>; ++ }; ++ ++ partition@200000 { ++ label = "kernel"; ++ reg = <0x200000 0x200000>; ++ }; ++ ++ partition@400000 { ++ label = "root"; ++ reg = <0x400000 0x1200000>; ++ }; ++}; ++ ++&mdio { ++ status = "okay"; ++}; ++ ++ð0 { ++ status = "okay"; ++ ethernet0-port@0 { ++ speed = <1000>; ++ duplex = <1>; ++ }; ++}; ++ ++ð1 { ++ status = "okay"; ++ ethernet1-port@0 { ++ speed = <1000>; ++ duplex = <1>; ++ }; ++}; +diff -ruN a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile +--- a/arch/arm/boot/dts/Makefile 2014-10-13 15:07:28.935284626 -0500 ++++ b/arch/arm/boot/dts/Makefile 2014-10-13 15:07:53.676759195 -0500 +@@ -90,6 +90,7 @@ + kirkwood-dns325.dtb \ + kirkwood-dockstar.dtb \ + kirkwood-dreamplug.dtb \ ++ kirkwood-ea3500.dtb \ + kirkwood-ea4500.dtb \ + kirkwood-goflexnet.dtb \ + kirkwood-guruplug-server-plus.dtb \ diff --git a/target/linux/kirkwood/profiles/115-router.mk b/target/linux/kirkwood/profiles/115-router.mk index 000aa74..ef7f228 100644 --- a/target/linux/kirkwood/profiles/115-router.mk +++ b/target/linux/kirkwood/profiles/115-router.mk @@ -5,6 +5,22 @@ # See /LICENSE for more information. # +define Profile/EA3500 + NAME:=Linksys EA3500 + PACKAGES:= \ + kmod-mwl8k kmod-usb2 kmod-usb-storage \ + uboot-envtools +endef + +define Profile/EA3500/Description + Package set compatible with Linksys EA3500 board. +endef + +EA3500_UBIFS_OPTS:="-m 2048 -e 126KiB -c 4096" +EA3500_UBI_OPTS:="-m 2048 -p 128KiB -s 512" + +$(eval $(call Profile,EA3500)) + define Profile/EA4500 NAME:=Linksys EA4500 PACKAGES:= \ -- 1.9.1 _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
