[ar71xx/kernel] upgrade 3.10.57 to 3.10.58 - released 2014-10-15 compile tested. runtime tested:
root@box:~ dmesg [ 0.000000] Linux version 3.10.58 (auto...@bittorf-wireless.de) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r42861) ) #2 Fri Oct 17 06:26:27 EDT 2014 [ 0.000000] MyLoader: sysp=aaaaaa2a, boardp=22aaaba8, parts=2aaaaaaa [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU revision is: 00019374 (MIPS 24Kc) [ 0.000000] SoC: Atheros AR9132 rev 2 [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:5.000MHz [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 02000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00000000-0x01ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x01ffffff] [ 0.000000] On node 0 totalpages: 8192 [ 0.000000] free_area_init_node: node 0, pgdat 803149b0, node_mem_map 81000000 [ 0.000000] Normal zone: 64 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 8192 pages, LIFO batch:0 [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 [ 0.000000] Kernel command line: board=TL-WR1043ND console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 28720k/32768k available (2255k kernel code, 4048k reserved, 603k data, 276k init, 0k highmem) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:51 [ 0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) [ 0.080000] pid_max: default: 32768 minimum: 301 [ 0.080000] Mount-cache hash table entries: 512 [ 0.090000] NET: Registered protocol family 16 [ 0.100000] MIPS: machine is TP-LINK TL-WR1043ND [...] shortlog from https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.58 hyperv: Fix a bug in netvsc_start_xmit() ip6_gre: fix flowi6_proto value in xmit path ipv6: reallocate addrconf router for ipv6 address when lo device up l2tp: fix race while getting PMTU on PPP pseudo-wire myri10ge: check for DMA mapping errors openvswitch: fix panic with multiple vlan headers packet: handle too big packets for PACKET_V3 sctp: handle association restarts when the socket is closed. sit: Fix ipip6_tunnel_lookup device matching criteria tcp: fixing TLP's FIN recovery tcp: fix tcp_release_cb() to dispatch via address family for mtu_reduced() tg3: Allow for recieve of full-size 8021AD frames tg3: Work around HW/FW limitations with vlan encapsulated frames USB: Add device quirk for ASUS T100 Base Station keyboard USB: cp210x: add support for Seluxit USB dongle USB: serial: cp210x: added Ketra N1 wireless interface support Signed-off-by: Bastian Bittorf <bitt...@bluebottle.com> --- target/linux/ar71xx/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/linux/ar71xx/Makefile b/target/linux/ar71xx/Makefile index 9d94e0b..0bf1ed1 100644 --- a/target/linux/ar71xx/Makefile +++ b/target/linux/ar71xx/Makefile @@ -13,7 +13,7 @@ FEATURES:=mips16 CPU_TYPE=34kc SUBTARGETS:=generic nand mikrotik -LINUX_VERSION:=3.10.57 +LINUX_VERSION:=3.10.58 include $(INCLUDE_DIR)/target.mk -- 1.7.10.4 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel