From: Roger Pueyo Centelles <[email protected]>
---
target/linux/ramips/base-files/etc/board.d/01_leds | 3 +
.../linux/ramips/base-files/etc/board.d/02_network | 1 +
target/linux/ramips/base-files/etc/diag.sh | 3 +
target/linux/ramips/base-files/lib/ramips.sh | 3 +
.../ramips/base-files/lib/upgrade/platform.sh | 23 ++---
target/linux/ramips/dts/WT3020-4M.dts | 100 +++++++++++++++++++++
target/linux/ramips/dts/WT3020-8M.dts | 100 +++++++++++++++++++++
target/linux/ramips/image/Makefile | 2 +
8 files changed, 224 insertions(+), 11 deletions(-)
create mode 100644 target/linux/ramips/dts/WT3020-4M.dts
create mode 100644 target/linux/ramips/dts/WT3020-8M.dts
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds
b/target/linux/ramips/base-files/etc/board.d/01_leds
index 26f384d..7ca7ffb 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -213,6 +213,9 @@ case $board in
wt1520)
set_wifi_led "rt2800pci-phy0::radio"
;;
+ wt3020)
+ ucidef_set_led_default "power" "power" "nexx:blue:power" "0"
+ ;;
y1 |\
y1s)
ucidef_set_led_default "power" "power" "lenovo:blue:power" "1"
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
b/target/linux/ramips/base-files/etc/board.d/02_network
index 7ecec5f..ff8fbc0 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -127,6 +127,7 @@ ramips_setup_interfaces()
hg255d | \
rt-n14u | \
wrtnode | \
+ wt3020 | \
ur-326n4g | \
zbt-wa05)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
diff --git a/target/linux/ramips/base-files/etc/diag.sh
b/target/linux/ramips/base-files/etc/diag.sh
index aed7d6a..2977099 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -170,6 +170,9 @@ get_status_led() {
nexx-wt1520)
status_led="nexx-wt1520:white:power"
;;
+ nexx-wt3020)
+ status_led="nexx:blue:power"
+ ;;
mzk-w300nh2)
status_led="mzkw300nh2:green:power"
;;
diff --git a/target/linux/ramips/base-files/lib/ramips.sh
b/target/linux/ramips/base-files/lib/ramips.sh
index 08c5dff..88fa623 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -184,6 +184,9 @@ ramips_board_detect() {
*"Nexx WT1520")
name="wt1520"
;;
+ *"Nexx WT3020")
+ name="wt3020"
+ ;;
*"NW718")
name="nw718"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh
b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 52f3f0a..0d8bc44 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -78,30 +78,31 @@ platform_check_image() {
sl-r7205 | \
tew-691gr | \
tew-692gr | \
- w306r-v20 |\
- w502u |\
- wr6202 |\
+ ur-326n4g |\
+ ur-336un |\
v22rw-2x2 | \
vocore | \
+ w306r-v20 |\
+ w502u |\
+ whr-g300n |\
wl341v3 | \
wl-330n | \
wl-330n3g | \
wl-351 | \
- wnce2001 | \
wli-tx4-ag300n | \
- whr-g300n |\
- wt1520 |\
- ur-326n4g |\
- ur-336un |\
- wr512-3gn |\
wmr300 |\
+ wnce2001 | \
+ wr512-3gn |\
+ wr6202 |\
wr8305rt |\
wrtnode |\
+ wt1520 |\
+ wt3020 |\
x5 |\
x8 |\
- zbt-wa05 |\
y1 |\
- y1s)
+ y1s |\
+ zbt-wa05)
[ "$magic" != "27051956" ] && {
echo "Invalid image type."
return 1
diff --git a/target/linux/ramips/dts/WT3020-4M.dts
b/target/linux/ramips/dts/WT3020-4M.dts
new file mode 100644
index 0000000..7583680
--- /dev/null
+++ b/target/linux/ramips/dts/WT3020-4M.dts
@@ -0,0 +1,100 @@
+/dts-v1/;
+
+/include/ "mt7620n.dtsi"
+
+/ {
+ compatible = "wt3020", "ralink,mt7620n-soc";
+ model = "Nexx WT3020";
+
+ palmbus@10000000 {
+ gpio2: gpio@660 {
+ status = "okay";
+ };
+
+ gpio3: gpio@688 {
+ status = "okay";
+ };
+
+ spi@b00 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "w25q32";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "w25q32";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+ };
+
+ ehci@101c0000 {
+ status = "okay";
+ };
+
+ ohci@101c1000 {
+ status = "okay";
+ };
+
+ ethernet@10100000 {
+ mtd-mac-address = <&factory 0x4>;
+ ralink,port-map = "wllll";
+ };
+
+ wmac@10180000 {
+ ralink,mtd-eeprom = <&factory 0>;
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "ephy", "wled", "pa", "i2c",
"wdt", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 1>;
+ linux,code = <0x198>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ power {
+ label = "nexx:blue:power";
+ gpios = <&gpio3 0 0>;
+ };
+ };
+};
diff --git a/target/linux/ramips/dts/WT3020-8M.dts
b/target/linux/ramips/dts/WT3020-8M.dts
new file mode 100644
index 0000000..5fa7c92
--- /dev/null
+++ b/target/linux/ramips/dts/WT3020-8M.dts
@@ -0,0 +1,100 @@
+/dts-v1/;
+
+/include/ "mt7620n.dtsi"
+
+/ {
+ compatible = "wt3020", "ralink,mt7620n-soc";
+ model = "Nexx WT3020";
+
+ palmbus@10000000 {
+ gpio2: gpio@660 {
+ status = "okay";
+ };
+
+ gpio3: gpio@688 {
+ status = "okay";
+ };
+
+ spi@b00 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "w25q64";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "w25q64";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+ };
+
+ ehci@101c0000 {
+ status = "okay";
+ };
+
+ ohci@101c1000 {
+ status = "okay";
+ };
+
+ ethernet@10100000 {
+ mtd-mac-address = <&factory 0x4>;
+ ralink,port-map = "wllll";
+ };
+
+ wmac@10180000 {
+ ralink,mtd-eeprom = <&factory 0>;
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "ephy", "wled", "pa", "i2c",
"wdt", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 1>;
+ linux,code = <0x198>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ power {
+ label = "nexx:blue:power";
+ gpios = <&gpio3 0 0>;
+ };
+ };
+};
diff --git a/target/linux/ramips/image/Makefile
b/target/linux/ramips/image/Makefile
index f048caf..a93b82c 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -769,6 +769,7 @@ Image/Build/Profile/WMR300=$(call
BuildFirmware/Default8M/$(1),$(1),wmr-300,WMR3
Image/Build/Profile/RT-N14U=$(call
BuildFirmware/Default8M/$(1),$(1),rt-n14u,RT-N14U)
Image/Build/Profile/WR8305RT=$(call
BuildFirmware/Default8M/$(1),$(1),wr8305rt,WR8305RT)
Image/Build/Profile/WRTNODE=$(call
BuildFirmware/Default16M/$(1),$(1),wrtnode,WRTNODE)
+Image/Build/Profile/WT3020=$(call
BuildFirmware/DefaultDualSize/$(1),$(1),wt3020,WT3020)
Image/Build/Profile/ZBT-WA05=$(call
BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05)
ifeq ($(SUBTARGET),mt7620n)
@@ -778,6 +779,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/RT-N14U,$(1))
$(call Image/Build/Profile/WR8305RT,$(1))
$(call Image/Build/Profile/WRTNODE,$(1))
+ $(call Image/Build/Profile/WT3020,$(1))
$(call Image/Build/Profile/ZBT-WA05,$(1))
endef
endif
--
2.1.1
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
