Hi Gareth,
the patchwork server had a hdd crash. while the disc was being
replaced, your mail arrived. hence it is not in patchwork. as i use
scripts to merge patches from patchwork, i rely on all patches being
in patchwork :)
can you resend this one please so that patchwork gets a 2nd chance at
grabbing it ? that would make my life much easier.
John
On 28/10/2014 00:28, Gareth Bryan wrote:
> First time patch/post, have read the submitting patch guide - but
> apologies if I have made a faux pas somewhere (styling
> etiquette/etc). Pointers and/or constructive criticism welcome.
>
> Unbranded. Silkscreen on PCB is “A5-V11”, believed to be made by
> Bococom (or at least uses Bococom image encryption - as used on
> poray devices - but different key)
>
> Signed-off-by: Gareth Bryan <g...@mx9.org> ---
> target/linux/ramips/base-files/etc/board.d/01_leds | 3 +
> .../linux/ramips/base-files/etc/board.d/02_network | 7 ++
> target/linux/ramips/base-files/lib/ramips.sh | 3 +
> .../ramips/base-files/lib/upgrade/platform.sh | 1 +
> target/linux/ramips/dts/A5-V11.dts | 117
> +++++++++++++++++++++ target/linux/ramips/image/Makefile
> | 3 + target/linux/ramips/rt305x/profiles/misc.mk | 18
> ++++ tools/firmware-utils/src/mkporayfw.c | 8 ++ 8
> files changed, 160 insertions(+) create mode 100644
> target/linux/ramips/dts/A5-V11.dts create mode 100644
> target/linux/ramips/rt305x/profiles/misc.mk
>
> diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds
> b/target/linux/ramips/base-files/etc/board.d/01_leds index
> 7ca7ffb..4a482b3 100755 ---
> a/target/linux/ramips/base-files/etc/board.d/01_leds +++
> b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -27,6 +27,9
> @@ case $board in 3g300m) set_usb_led "tenda:blue:3g" ;; + a5-v11)
> + ucidef_set_led_default "power" "POWER" "a5-v11:red:power" "1" +
> ;; air3gii) set_wifi_led "airlive:green:wlan" set_usb_led
> "airlive:green:mobile" diff --git
> a/target/linux/ramips/base-files/etc/board.d/02_network
> b/target/linux/ramips/base-files/etc/board.d/02_network index
> ff8fbc0..6510b1a 100755 ---
> a/target/linux/ramips/base-files/etc/board.d/02_network +++
> b/target/linux/ramips/base-files/etc/board.d/02_network @@ -37,6
> +37,12 @@ ramips_setup_interfaces() ucidef_set_interface_loopback
>
> case $board in + a5-v11) + ucidef_set_interface_lan
> "eth0.1" +
> ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan
> "switch0" "1" "0 6t" + ;; + 3g300m | \ w150m | \ all0256n | \
> @@
> -252,6 +258,7 @@ ramips_setup_macs() lan_mac=$(macaddr_add
> "$lan_mac" -2) ;;
>
> + a5-v11 |\ bc2 |\ broadway |\ d105 |\ diff --git
> a/target/linux/ramips/base-files/lib/ramips.sh
> b/target/linux/ramips/base-files/lib/ramips.sh index
> 88fa623..b2b299d 100755 ---
> a/target/linux/ramips/base-files/lib/ramips.sh +++
> b/target/linux/ramips/base-files/lib/ramips.sh @@ -25,6 +25,9 @@
> ramips_board_detect() { *"Edimax 3g-6200nl") name="3g-6200nl" ;; +
> *"A5-V11") + name="a5-v11" + ;; *"Airlink101 AR725W")
> name="ar725w" ;; diff --git
> a/target/linux/ramips/base-files/lib/upgrade/platform.sh
> b/target/linux/ramips/base-files/lib/upgrade/platform.sh index
> c9a418e..4fe0ef4 100755 ---
> a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++
> b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -17,6
> +17,7 @@ platform_check_image() { 3g-6200n | \ 3g-6200nl | \ 3g300m
> | \ + a5-v11 | \ air3gii | \ all0239-3g | \ all0256n | \ diff --git
> a/target/linux/ramips/dts/A5-V11.dts
> b/target/linux/ramips/dts/A5-V11.dts new file mode 100644 index
> 0000000..154074a --- /dev/null +++
> b/target/linux/ramips/dts/A5-V11.dts @@ -0,0 +1,117 @@ +/dts-v1/;
> + +/include/ "rt5350.dtsi" + +/ { + compatible = "A5-V11",
> "ralink,rt5350-soc"; + model = "A5-V11"; + + palmbus@10000000 { +
> spi@b00 { + status = "okay"; +
> m25p80@0 { + #address-cells =
> <1>; + #size-cells = <1>; +
> compatible = "pm25lq032"; +
> reg = <0 0>; + linux,modalias = "m25p80",
> "pm25lq032"; +
> spi-max-frequency = <10000000>; + + partition@0 { +
> label =
> "u-boot"; + reg = <0x0 0x30000>; +
> read-only; + }; + +
> partition@30000 { + label = "u-boot-env"; +
> reg = <0x30000
> 0x10000>; + read-only; +
> }; + + factory: partition@40000
> { + label = "factory"; +
> reg = <0x40000 0x10000>; +
> read-only; + }; + +
> partition@50000 { + label =
> "firmware"; + reg = <0x50000 0x3b0000>; +
> }; + }; + }; +
> gpio1: gpio@660 { + status = "okay"; + }; +
> }; + + pinctrl { +
> state_default: pinctrl0 { + gpio { +
> ralink,group = "i2c",
> "jtag", "uartf", "led"; + ralink,function =
> "gpio"; + }; +
> }; + }; + + ethernet@10100000 { + mtd-mac-address = <&factory
> 0x4>; + }; + + esw@10110000 { + ralink,portmap =
> <0x2f>; + }; + +
> wmac@10180000 { + ralink,mtd-eeprom = <&factory 0>; + }; + +
> ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 {
> +
> status = "okay"; + }; + + gpio-leds { + compatible =
> "gpio-leds";
> + system { + label = "a5-v11:blue:system"; +
> gpios = <&gpio0
> 20 1>; + }; + power { + label =
> "a5-v11:red:power"; + gpios =
> <&gpio0 17 1>; + }; + }; + + gpio-keys-polled { +
> compatible =
> "gpio-keys-polled"; + #address-cells = <1>; + #size-cells =
> <0>;
> + poll-interval = <20>; + reset { +
> label = "reset"; + gpios
> = <&gpio0 0 1>; + linux,code = <0x198>; + }; +
> }; + +
> gpio_export { + compatible = "gpio-export"; +
> #size-cells = <0>;
> + + usb { + gpio-export,name = "usb"; +
> gpio-export,output =
> <1>; + gpios = <&gpio0 7 0>; + }; +
> root_hub { +
> gpio-export,name = "root_hub"; + gpio-export,output =
> <1>; +
> gpios = <&gpio0 12 0>; + }; + }; +}; diff --git
> a/target/linux/ramips/image/Makefile
> b/target/linux/ramips/image/Makefile index 9a47f86..584f19a 100644
> --- a/target/linux/ramips/image/Makefile +++
> b/target/linux/ramips/image/Makefile @@ -336,6 +336,8 @@
> Image/Build/Profile/3G6200NL=$(call
> BuildFirmware/Edimax/$(1),$(1),3g-6200nl,3G-
>
> Image/Build/Profile/3G300M=$(call
> BuildFirmware/CustomFlashFactory/$(1),$(1),3g300m,3G300M,$(ralink_default_fw_size_4M),3G150M_SPI
> Kernel Image,factory)
>
> +Image/Build/Profile/A5-V11=$(call
> BuildFirmware/Poray4M/$(1),$(1),a5-v11,A5-V11) +
> Image/Build/Profile/AIR3GII=$(call
> BuildFirmware/Default4M/$(1),$(1),air3gii,AIR3GII)
>
> define BuildFirmware/UIMAGE_8M @@ -593,6 +595,7 @@ define
> Image/Build/Profile/Default $(call
> Image/Build/Profile/3G6200N,$(1)) $(call
> Image/Build/Profile/3G6200NL,$(1)) $(call
> Image/Build/Profile/3G300M,$(1)) + $(call
> Image/Build/Profile/A5-11,$(1)) $(call
> Image/Build/Profile/AIR3GII,$(1)) $(call
> Image/Build/Profile/ALL02393G,$(1)) $(call
> Image/Build/Profile/ALL0256N,$(1)) diff --git
> a/target/linux/ramips/rt305x/profiles/misc.mk
> b/target/linux/ramips/rt305x/profiles/misc.mk new file mode 100644
> index 0000000..cf7db6a --- /dev/null +++
> b/target/linux/ramips/rt305x/profiles/misc.mk @@ -0,0 +1,18 @@ +#
> +# Copyright (C) 2014 OpenWrt.org +# +# This is free software,
> licensed under the GNU General Public License v2. +# See /LICENSE
> for more information. +# + +define Profile/A5-V11 + NAME:=A5-V11 +
> PACKAGES:=\ + kmod-usb-core kmod-usb-ohci kmod-usb2 +endef +
> +define Profile/A5-V11/Description + Package set for A5-V11 +endef
> + +$(eval $(call Profile,A5-V11)) diff --git
> a/tools/firmware-utils/src/mkporayfw.c
> b/tools/firmware-utils/src/mkporayfw.c index 8e0cf24..960c604
> 100644 --- a/tools/firmware-utils/src/mkporayfw.c +++
> b/tools/firmware-utils/src/mkporayfw.c @@ -60,6 +60,7 @@ #define
> HWID_PORAY_X1 0x38353335 #define HWID_NEXX_WT15XXX 0x30353332
> #define HWID_NEXX_WT3020A 0x30323033 +#define HWID_A5_V11
> 0x32473352
>
> /* Recognized XOR obfuscation keys */ #define KEY_HAME 0 @@
> -69,6
> +70,7 @@ #define KEY_PORAY_4 4 #define KEY_NEXX_1 5
> #define
> KEY_NEXX_2 6 +#define KEY_A5_V11 7
>
> /* XOR key length */ #define KEY_LEN 15 @@ -123,6 +125,7 @@
> static uint8_t key[][KEY_LEN] = { {0x79, 0x7B, 0x7A, 0x93, 0x92,
> 0x95, 0xC3, 0x63, 0xD0, 0xA3, 0x9C, 0x92, 0x2E, 0xE6, 0xC7}, {0x19,
> 0x1C, 0x4A, 0x93, 0x96, 0x95, 0xC3, 0x63, 0xD0, 0xA3, 0x9C, 0x92,
> 0x2E, 0x16, 0xC6}, {0x39, 0x1C, 0x4A, 0x93, 0x96, 0x95, 0xC3, 0x63,
> 0xD0, 0xA3, 0x9C, 0x92, 0x2E, 0x16, 0xC6}, + {0xC8, 0x3C, 0x3A,
> 0x93, 0xA2, 0x95, 0xC3, 0x63, 0x48, 0x45, 0x58, 0x09, 0x20, 0x11,
> 0x08}, };
>
> static struct flash_layout layouts[] = { @@ -139,6 +142,11 @@
> static struct flash_layout layouts[] = {
>
> static struct board_info boards[] = { { + .id =
> "A5-V11", + .hw_id = HWID_A5_V11, +
> .layout_id =
> "4M", + .key = KEY_A5_V11, + }, { .id
> =
> "MPR-A1", .hw_id = HWID_HAME_MPR_A1_L8, .layout_id = "4M",
> --
> 1.9.1 _______________________________________________ openwrt-devel
> mailing list openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
