Hi, Did anyone else see issues with ar9344 PCIe not coming up sometimes (it is really rare in my case)?
Good boot dmesg: [ 0.070000] registering PCI controller with io_map_base unset [ 0.280000] bio: create slab <bio-0> at 0 [ 0.280000] PCI host bridge to bus 0000:00 [ 0.280000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff] [ 0.280000] pci_bus 0000:00: root bus resource [io 0x0000] [ 0.280000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 0.280000] pci 0000:00:00.0: [168c:0030] type 00 class 0x028000 [ 0.280000] pci 0000:00:00.0: invalid calibration data [ 0.290000] pci 0000:00:00.0: reg 10: [mem 0x00000000-0x0001ffff 64bit] [ 0.290000] pci 0000:00:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.290000] pci 0000:00:00.0: supports D1 [ 0.290000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 0.290000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 0.290000] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1001ffff 64bit] [ 0.290000] pci 0000:00:00.0: BAR 6: assigned [mem 0x10020000-0x1002ffff pref] [ 0.290000] pci 0000:00:00.0: using irq 40 for pin 1 Bad boot dmesg: [ 0.070000] ar724x-pci ar724x-pci: PCIe link is down [ 0.070000] registering PCI controller with io_map_base unset [ 0.280000] bio: create slab <bio-0> at 0 [ 0.280000] PCI host bridge to bus 0000:00 [ 0.280000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff] [ 0.280000] pci_bus 0000:00: root bus resource [io 0x0000] [ 0.280000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 0.280000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 In this state no device is detected on the PCI bus. Any ideas? Thanks, Helmut _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
