Y1S has 2 Gigabit LAN. So I used the following: y1 |\ y1s) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "switch0" "1" "1" ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5 6t 7" ucidef_add_switch_vlan "switch0" "2" "4 6t" ;;
Tested on Y1. But I don't have a Y1S so I can't test if this is the correct config. Ah....Sorry for my bad English:-) 2014-12-12 3:44 GMT+08:00, John Crispin <blo...@openwrt.org>: > Hi, > > any lenovo Y1S users around ? > > while looking into this ticket -> > > https://dev.openwrt.org/ticket/18528 > > i found this site -> > http://show.smzdm.com/detail/94937 > > looking at the picture i think the port mapping is totally broken. > > we currently have > y1 |\ > y1s) > ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" > ucidef_add_switch "switch0" "1" "1" > ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5 6t" > ucidef_add_switch_vlan "switch0" "2" "0 6t" > > > wan on Y1 should be port 4 and wan on Y1S should be port 5 (gmac1) > > i think it should be > y1) > ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" > ucidef_add_switch "switch0" "1" "1" > ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 6t" > ucidef_add_switch_vlan "switch0" "2" "4 6t > > y1s) > ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" > ucidef_add_switch "switch0" "1" "1" > ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4 6t" > ucidef_add_switch_vlan "switch0" "2" "5 6t" > > could someone tell me if the case has WAN written on any of the ports ? > > John > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel