Hello, Few comments from a person that doesn't own this device (but owns an MPR-A1 clone).
"Vittorio G (VittGam)" <[email protected]> writes: > - Remove unneeded VLAN now that the ethernet driver is fixed and TCP > packets get passed correctly now. (This router only has one port.) I've checked the OpenWrt wiki, the device page is not present [1]. I think VLAN config might be useful for documentation purposes in case someone would need to enable tagging on Ethernet he'd need to learn the CPU and physical port numbers somehow. If you already have a suitable config (probably disabled) in uci-defaults, that would be much easier. > - Remove unnecessary packages from the profile. (The end-user is > supposed to use mechanisms such as the ImageBuilder in order to add > his own set of packages to his own images... while the precompiled > images should just contain the core set of packages needed to run the > base functions of a wireless router.) So you remove wpad-mini but leave USB packages in place? :) IMHO triggers are not needed but wpad-mini should stay. I agree it's useful to have kernel modules that handle specific USB controller, everything else is clearly optional (apart from packages like button-hotplug and fstools that are part of the base install anyway, afair). [1] http://wiki.openwrt.org/toh/hootoo/ht-tm02 -- Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software! mailto:[email protected] _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
