Fix the WLAN MAC address to match the one printed on the label by using the correct address from the ART instead of the address of the LAN interface.
Signed-off-by: Matthias Schiffer <[email protected]> --- target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-c1.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-c1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-c1.c index 425be30..e55a43f 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-c1.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-c1.c @@ -38,6 +38,8 @@ #define DIR_615C1_CONFIG_ADDR 0x1f020000 #define DIR_615C1_CONFIG_SIZE 0x10000 +#define DIR_615C1_WLAN_MAC_ADDR 0x1f3fffb4 + static struct gpio_led dir_615c1_leds_gpio[] __initdata = { { .name = "d-link:orange:status", @@ -96,16 +98,16 @@ static void __init dir_615c1_setup(void) { const char *config = (char *) KSEG1ADDR(DIR_615C1_CONFIG_ADDR); u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - u8 mac[6]; - u8 *wlan_mac = NULL; + u8 mac[ETH_ALEN], wlan_mac[ETH_ALEN]; if (ath79_nvram_parse_mac_addr(config, DIR_615C1_CONFIG_SIZE, "lan_mac=", mac) == 0) { ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); - wlan_mac = mac; } + ath79_parse_ascii_mac((char *) KSEG1ADDR(DIR_615C1_WLAN_MAC_ADDR), wlan_mac); + ath79_register_mdio(0, DIR_615C1_MDIO_MASK); ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; -- 2.2.2 _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
