On 09/02/2015 21:56, Bruno Randolf wrote: > Hi John, > > Something's wrong with the serial, but I was able to login via Ethernet. > > I did not verify PCI yet, as I only have a PCI adapter on the cubes > which are in use. > > Serial log below: > > bruno > > On 02/09/2015 12:26 PM, John Crispin wrote: >> Hi Bruno, (or anyone else that has the hw at hand) >> >> i pushed the v3.18 support. could you test it please and let me know if >> it is working ? you need to set 3.18 in the Makefile, it is still at 3.14. > > [ 0.000000] Linux version 3.18.6 (br1@shiva) (gcc version 4.8.3 > (OpenWrt/Linaro GCC 4.8-2014.04 r44360) ) #1 Mon Feb 9 20:19:34 WET 2015 > [ 0.000000] bootconsole [early0] enabled > [ 0.000000] CPU0 revision is: 01030202 (Au1500) > [ 0.000000] 4G Systems MTX-1 Board > [ 0.000000] Determined physical RAM map: > [ 0.000000] memory: 04000000 @ 00000000 (usable) > [ 0.000000] Initrd not found or empty - disabling initrd > [ 0.000000] Zone ranges: > [ 0.000000] Normal [mem 0x00000000-0x03ffffff] > [ 0.000000] Movable zone start for each node > [ 0.000000] Early memory node ranges > [ 0.000000] node 0: [mem 0x00000000-0x03ffffff] > [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x03ffffff] > [ 0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 32 > bytes. > [ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, > linesize 32 bytes > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. > Total pages: 16256 > [ 0.000000] Kernel command line: root=/dev/mtdblock/0 > console=ttyS0,115200 root=/dev/mtdblock0 rootfstype=squashfs,jffs2 > [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) > [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) > [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) > [ 0.000000] Memory: 60556K/65536K available (2412K kernel code, 95K > rwdata, 476K rodata, 144K init, 195K bss, 4980K reserved) > [ 0.000000] NR_IRQS:128 > [ 0.000000] Alchemy clocksource installed > [ 0.004000] Calibrating delay loop... 395.26 BogoMIPS (lpj=790528) > [ 0.040000] pid_max: default: 32768 minimum: 301 > [ 0.044000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) > [ 0.048000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 > bytes) > [ 0.056000] NET: Registered protocol family 16 > [ 0.060000] Alchemy clocktree installed > [ 0.064000] Alchemy DMA initialized > [ 0.068000] alchemy-pci alchemy-pci.0: PCI controller at 32 MHz > [ 0.100000] PCI host bridge to bus 0000:00 > [ 0.104000] pci_bus 0000:00: root bus resource [mem > 0x40000000-0x4fffffff] > [ 0.108000] pci_bus 0000:00: root bus resource [io 0x1000-0xffff] > [ 0.112000] pci_bus 0000:00: No busn resource found for root bus, > will use [bus 00-ff] > [ 0.116000] Switched to clocksource alchemy-counter1 > [ 0.124000] NET: Registered protocol family 2 > [ 0.128000] TCP established hash table entries: 1024 (order: 0, 4096 > bytes) > [ 0.136000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) > [ 0.144000] TCP: Hash tables configured (established 1024 bind 1024) > [ 0.152000] TCP: reno registered > [ 0.156000] UDP hash table entries: 256 (order: 0, 4096 bytes) > [ 0.160000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) > [ 0.168000] NET: Registered protocol family 1 > [ 0.176000] futex hash table entries: 256 (order: -1, 3072 bytes) > [ 0.188000] squashfs: version 4.0 (2009/01/31) Phillip Lougher > [ 0.192000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) > (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. > [ 0.216000] msgmni has been set to 118 > [ 0.224000] io scheduler noop registered > [ 0.228000] io scheduler deadline registered (default) > [ 0.232000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled > [ 0.240000] console [ttyS0] disabled > [ 0.244000] serial8250.8: ttyS0 at MMIO 0x11100000 (irq = 8, > base_baud = 18187500) is a 16550A > �������������������������������������������������������������������������������������������
ok, bad baudrate. i fixed this on mediatek in the upstream kernel for 3.16 or 17. need to think of what the issue was. it was easy to fix though. > With 14.07 the last part looks like this: > > [ 0.180000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled > [ 0.192000] serial8250.8: ttyS0 at MMIO 0x11100000 (irq = 8) is a 16550A > [ 0.200000] console [ttyS0] enabled, bootconsole disabled > [ 0.200000] console [ttyS0] enabled, bootconsole disabled > [ 0.216000] serial8250.8: ttyS1 at MMIO 0x11400000 (irq = 11) is a 16550A > _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel