On 12 February 2015 at 21:04, John Crispin <blo...@openwrt.org> wrote: > [ 0.564000] Creating 4 MTD partitions on "spi32766.0": > [ 0.568000] 0x000000000000-0x000000010000 : "uboot" > [ 0.572000] 0x000000010000-0x000000020000 : "uboot-env" > [ 0.580000] 0x000000020000-0x000000030000 : "calibration" > [ 0.584000] 0x000000050000-0x000000ff0000 : "firmware" > [ 0.596000] mtdsplit_uimage: [__mtdsplit_parse_uimage] buf:c0049000 > sizeof(*buf):1 > [ 0.600000] mtdsplit_uimage: [__mtdsplit_parse_uimage] sizeof(*header):64 > [ 0.608000] mtdsplit_uimage: [read_uimage_header] buf:c0049000 > header_len:1 > [ 0.616000] mtdsplit_uimage: [uimage_find_edimax] buf:c0049000 len:1 > FW_EDIMAX_OFFSET + sizeof(*header):84 > [ 0.624000] mtdsplit_uimage: Buffer too small for checking Edimax header > [ 0.784000] Dedicated partitioner didn't split firmware partition, > please fill a bug report! > [ 0.788000] 0x000000172108-0x000000ff0000 : "rootfs" > [ 0.796000] mtd: partition "rootfs" must either start or end on erase > block boundary or be smaller than an erase block -- forcing read-only > [ 0.808000] mtd: device 4 (rootfs) set to be root filesystem > [ 0.812000] 1 squashfs-split partitions found on MTD device rootfs > [ 0.820000] 0x000000340000-0x000000ff0000 : "rootfs_data" > [ 1.916000] Realtek RTL8366RB ethernet switch driver version 0.2.4 > [ 1.924000] rtl8366rb rtl8366rb: using GPIO pins 491 (SDA) and 493 (SCK) > [ 1.928000] rtl8366rb rtl8366rb: RTL5937 ver. 3 chip found
Thank you! My obvious bug was fixed in https://dev.openwrt.org/changeset/44424/ Please note that if you still get > Dedicated partitioner didn't split firmware partition, please fill a bug > report! with 44424, it means that there is something wrong in target/linux/generic/files/drivers/mtd/mtdsplit/mtdsplit_uimage.c and we/you should look for a working reference code in 405-mtd-old-firmware-uimage-splitter.patch _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel