Ok, patch updated with latest changes in trunk, and suggestions. About SPROM fixups, I misundertsood its purpouse. Deleted since it's not required.
Signed-off-by: Daniel Gonzalez <[email protected]> diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds b/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds index 854b3b2..69d797e 100644 --- a/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds +++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds @@ -14,6 +14,14 @@ case "$board_name" in 96328dg2x2) ucidef_set_led_usbdev "usb" "USB" "A4001N:green:usb" "1-1" ;; +DGND3700v1_3800B) + ucidef_set_led_netdev "lan" "LAN" "DGND3700v1_3800B:green:lan" "eth0.1" + ucidef_set_led_netdev "wan" "WAN" "DGND3700v1_3800B:green:inet" "eth0.2" + ucidef_set_led_netdev "wlan0" "WIFI2G" "DGND3700v1_3800B:green:wifi2g" "wlan0" + ucidef_set_led_netdev "wlan1" "WIFI5G" "DGND3700v1_3800B:blue:wifi5g" "wlan1" + ucidef_set_led_usbdev "usb1" "USB1" "DGND3700v1_3800B:green:usb-back" "1-1" + ucidef_set_led_usbdev "usb2" "USB2" "DGND3700v1_3800B:green:usb-front" "1-2" + ;; 'F@ST2704V2') ucidef_set_led_usbdev "usb" "USB" "F@ST2704V2:green:usb" "1-1" ;; diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network index 709a1c8..6b9736a 100644 --- a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network +++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network @@ -108,6 +108,13 @@ P870HW-51a_v2) ucidef_add_switch_vlan "eth0" "2" "4 5t" ;; +DGND3700v1_3800B) + ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" + ucidef_add_switch "eth0" "1" "1" + ucidef_add_switch_vlan "eth0" "1" "1 2 3 4 8t" + ucidef_add_switch_vlan "eth0" "2" "0 8t" + ;; + NB6) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "switch0" "1" "1" diff --git a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh index 58ce71e..53dd759 100755 --- a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh +++ b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh @@ -111,6 +111,13 @@ brcm63xx_detect() { brcm63xx_has_reset_button="true" ifname=eth0 ;; + + DGND3700v1_3800B) + status_led="DGND3700v1_3800B:green:power" + brcm63xx_has_reset_button="true" + ifname="eth0" + ;; + "F@ST2504n") status_led="fast2504n:green:ok" brcm63xx_has_reset_button="true" diff --git a/target/linux/brcm63xx/image/Makefile b/target/linux/brcm63xx/image/Makefile index dd16355..3fb9b1c 100755 --- a/target/linux/brcm63xx/image/Makefile +++ b/target/linux/brcm63xx/image/Makefile @@ -111,6 +111,12 @@ define Image/Build/HCSDTB --output_file=$(BIN_DIR)/openwrt-$(2)-$(1).bin endef +define Image/Build/ChkDTB + # Generate Netgear factory image + $(STAGING_DIR_HOST)/bin/mkchkimg -o $(BIN_DIR)/openwrt-$(2)-$(1)-factory.chk \ + -k $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin -b $(5) -r $(6) +endef + define Build/Clean $(MAKE) -C lzma-loader clean endef @@ -303,6 +309,12 @@ $(eval $(call ImageDTB,RedBootDTB,Livebox,livebox,livebox-blue-5g)) $(eval $(call ImageDTB,HCSDTB,CVG834G,,cvg834g,a020,0001,0022,vmlinux-cvg834g)) # Netgear DG834GT/PN $(eval $(call ImageDTB,CFEDTB,DG834GTPN,DG834GT_PN,dg834gtpn,96348GW-10,6348)) +# Netgear DGND3700 v1 / DGND3800B +$(eval $(call ImageDTB,CFEDTB,DGND3700v1_3800B,DGND3700v1_3800B,dgnd3700v1,96368MVWG,6368,--image-offset 0x20000 --block-size 0x20000)) +#Netgear DGND3700 v1 factory firmware +$(eval $(call ImageDTB,ChkDTB,DGND3700v1_3800B,DGND3700v1,,DGND3700v1_3800B,U12L144T01_NETGEAR_NEWLED,1)) +#Netgear DGND3800B factory firmware +$(eval $(call ImageDTB,ChkDTB,DGND3700v1_3800B,DGND3800B,,DGND3700v1_3800B,U12L144T11_NETGEAR_NEWLED,1)) # Pirelli Alice Gate VoIP 2 Plus Wi-Fi AGPF-S0 $(eval $(call ImageDTB,CFEDTB,AGPF_S0,AGV2+W,agpf-s0,AGPF-S0,6358,--block-size 0x20000 --image-offset 0x20000 --signature2 IMAGE --tag-version 8)) # Pirelli A226G diff --git a/target/linux/brcm63xx/profiles/netgear.mk b/target/linux/brcm63xx/profiles/netgear.mk index 75ddab5..20224a2 100644 --- a/target/linux/brcm63xx/profiles/netgear.mk +++ b/target/linux/brcm63xx/profiles/netgear.mk @@ -12,7 +12,6 @@ endef define Profile/CVG834G/Description Package set optimized for CVG834G. endef - $(eval $(call Profile,CVG834G)) define Profile/DG834GTPN @@ -23,3 +22,13 @@ define Profile/DG834GTPN/Description Package set optimized for DG834GT/PN. endef $(eval $(call Profile,DG834GTPN)) + +define Profile/DGND3700v1_3800B + NAME:=Netgear DGND3700 v1 / DGND3800B + PACKAGES:=kmod-b43 wpad-mini \ + kmod-usb2 kmod-usb-ohci kmod-ledtrig-usbdev +endef +define Profile/DGND3700v1_3800B/Description + Package set optimized for DGND3700 v1 / DGND3800B. +endef +$(eval $(call Profile,DGND3700v1_3800B)) diff --git a/target/linux/brcm63xx/dts/dgnd3700v1.dts b/target/linux/brcm63xx/dts/dgnd3700v1.dts new file mode 100644 index 0000000..65fae44 --- /dev/null +++ b/target/linux/brcm63xx/dts/dgnd3700v1.dts @@ -0,0 +1,110 @@ +/dts-v1/; + +/include/ "bcm6368.dtsi" + +/ { + model = "Netgear DGND3700v1/DGND3800B"; + compatible = "netgear,dgnd3700v1", "brcm,bcm6368"; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + debounce-interval = <60>; + + wlan { + label = "wlan"; + gpios = <&gpio0 10 1>; + linux,code = <0xee>; + }; + reset { + label = "reset"; + gpios = <&gpio0 12 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio1 3 1>; + linux,code = <0x211>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + dsl_green { + label = "DGND3700v1_3800B:green:dsl"; + gpios = <&gpio0 2 1>; + }; + inet_red { + label = "DGND3700v1_3800B:red:inet"; + gpios = <&gpio0 4 1>; + }; + inet_green { + label = "DGND3700v1_3800B:green:inet"; + gpios = <&gpio0 5 1>; + }; + wps_green { + label = "DGND3700v1_3800B:green:wps"; + gpios = <&gpio0 11 1>; + }; + usbfront_green { + label = "DGND3700v1_3800B:green:usb-front"; + gpios = <&gpio0 13 1>; + }; + usbback_green { + label = "DGND3700v1_3800B:green:usb-back"; + gpios = <&gpio0 14 1>; + }; + power_red { + label = "DGND3700v1_3800B:red:power"; + gpios = <&gpio0 22 1>; + }; + lan_green { + label = "DGND3700v1_3800B:green:lan"; + gpios = <&gpio0 23 1>; + }; + power_green { + label = "DGND3700v1_3800B:green:power"; + gpios = <&gpio0 24 1>; + default-state = "on"; + }; + wifi2g_green { + label = "DGND3700v1_3800B:green:wifi2g"; + gpios = <&gpio0 26 1>; + }; + wifi5g_blue { + label = "DGND3700v1_3800B:blue:wifi5g"; + gpios = <&gpio0 27 1>; + }; + }; +}; + +&pflash { + status = "ok"; + + linux,part-probe = "bcm63xxpart"; + + cfe@0 { + label = "CFE"; + reg = <0x000000 0x020000>; + read-only; + }; + + linux@20000 { + label = "linux"; + reg = <0x020000 0x1e20000>; + }; + + board_data@1e40000 { + label = "board_data"; + reg = <0x1e40000 0x1a0000>; + read-only; + }; + + nvram@1fe0000 { + label = "nvram"; + reg = <0x1fe0000 0x20000>; + }; +}; diff --git a/target/linux/brcm63xx/patches-3.14/568-board_DGND3700v1_3800B.patch b/target/linux/brcm63xx/patches-3.14/568-board_DGND3700v1_3800B.patch new file mode 100644 index 0000000..b4013bb --- /dev/null +++ b/target/linux/brcm63xx/patches-3.14/568-board_DGND3700v1_3800B.patch @@ -0,0 +1,67 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -2132,6 +2132,48 @@ + .has_ehci0 = 1, + }; + ++static struct b53_platform_data DGND3700v1_3800B_b53_pdata = { ++ .alias = "eth0", ++}; ++ ++static struct spi_board_info DGND3700v1_3800B_spi_devices[] = { ++ { ++ .modalias = "b53-switch", ++ .max_speed_hz = 781000, ++ .bus_num = 0, ++ .chip_select = 1, ++ .platform_data = &DGND3700v1_3800B_b53_pdata, ++ } ++}; ++ ++static struct board_info __initdata board_DGND3700v1_3800B = { ++ .name = "DGND3700v1_3800B", ++ .expected_cpu_id = 0x6368, ++ ++ .has_uart0 = 1, ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [5] = { ++ .used = 1, ++ .phy_id = 0xff, ++ .bypass_link = 1, ++ .force_speed = 1000, ++ .force_duplex_full = 1, ++ .name = "RGMII", ++ }, ++ }, ++ }, ++ ++ .spis = DGND3700v1_3800B_spi_devices, ++ .num_spis = ARRAY_SIZE(DGND3700v1_3800B_spi_devices), ++}; ++ + static struct sprom_fixup __initdata vr3025u_fixups[] = { + { .offset = 97, .value = 0xfeb3 }, + { .offset = 98, .value = 0x1618 }, +@@ -2723,6 +2765,7 @@ + #ifdef CONFIG_BCM63XX_CPU_6368 + &board_96368mvwg, + &board_96368mvngr, ++ &board_DGND3700v1_3800B, + &board_P870HW51A_V2, + &board_VR3025u, + &board_VR3025un, +@@ -2813,6 +2856,7 @@ + { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, }, + { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, }, + { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, ++ { .compatible = "netgear,dgnd3700v1", .data = &board_DGND3700v1_3800B, }, + { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, }, + #endif + #ifdef CONFIG_BCM63XX_CPU_63268 diff --git a/target/linux/brcm63xx/patches-3.18/568-board_DGND3700v1_3800B.patch b/target/linux/brcm63xx/patches-3.18/568-board_DGND3700v1_3800B.patch new file mode 100644 index 0000000..b4013bb --- /dev/null +++ b/target/linux/brcm63xx/patches-3.18/568-board_DGND3700v1_3800B.patch @@ -0,0 +1,67 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -2132,6 +2132,48 @@ + .has_ehci0 = 1, + }; + ++static struct b53_platform_data DGND3700v1_3800B_b53_pdata = { ++ .alias = "eth0", ++}; ++ ++static struct spi_board_info DGND3700v1_3800B_spi_devices[] = { ++ { ++ .modalias = "b53-switch", ++ .max_speed_hz = 781000, ++ .bus_num = 0, ++ .chip_select = 1, ++ .platform_data = &DGND3700v1_3800B_b53_pdata, ++ } ++}; ++ ++static struct board_info __initdata board_DGND3700v1_3800B = { ++ .name = "DGND3700v1_3800B", ++ .expected_cpu_id = 0x6368, ++ ++ .has_uart0 = 1, ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [5] = { ++ .used = 1, ++ .phy_id = 0xff, ++ .bypass_link = 1, ++ .force_speed = 1000, ++ .force_duplex_full = 1, ++ .name = "RGMII", ++ }, ++ }, ++ }, ++ ++ .spis = DGND3700v1_3800B_spi_devices, ++ .num_spis = ARRAY_SIZE(DGND3700v1_3800B_spi_devices), ++}; ++ + static struct sprom_fixup __initdata vr3025u_fixups[] = { + { .offset = 97, .value = 0xfeb3 }, + { .offset = 98, .value = 0x1618 }, +@@ -2723,6 +2765,7 @@ + #ifdef CONFIG_BCM63XX_CPU_6368 + &board_96368mvwg, + &board_96368mvngr, ++ &board_DGND3700v1_3800B, + &board_P870HW51A_V2, + &board_VR3025u, + &board_VR3025un, +@@ -2813,6 +2856,7 @@ + { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, }, + { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, }, + { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, ++ { .compatible = "netgear,dgnd3700v1", .data = &board_DGND3700v1_3800B, }, + { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, }, + #endif + #ifdef CONFIG_BCM63XX_CPU_63268 _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
