Previously, the generated images for the My Net Wi-fi Range Extender wouldn't always work (and panic) due to the fixed mtd offsets and sizes for the kernel and rootfs. This patch fixes the problem by utilizing the shared Cybertan's partition parser to recalculate the mtd partitions for every image dynamically everytime.
Reported-by: Pascal Paradis <[email protected]> Signed-off-by: Christian Lamparter <[email protected]> --- target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-rext.c | 12 +++++++++++- target/linux/ar71xx/image/Makefile | 4 ++-- 2 files changed, 13 insertions(+), 3 deletions(-) diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-rext.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-rext.c index a3deed5..02d168e 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-rext.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-rext.c @@ -55,6 +55,16 @@ #define MYNET_REXT_ART_ADDR 0x1f7f0000 +static const char *mynet_rext_part_probes[] = { + "cybertan", + NULL, +}; + +static struct flash_platform_data mynet_rext_flash_data = { + .type = "s25fl064k", + .part_probes = mynet_rext_part_probes, +}; + static struct gpio_led mynet_rext_leds_gpio[] __initdata = { { .name = "wd:blue:power", @@ -130,7 +140,7 @@ static void __init mynet_rext_setup(void) u8 *art = (u8 *) KSEG1ADDR(MYNET_REXT_ART_ADDR); u8 tmpmac[ETH_ALEN]; - ath79_register_m25p80(NULL); + ath79_register_m25p80(&mynet_rext_flash_data); /* GPIO configuration from drivers/char/GPIO8.c */ diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index b4b75a1..204a6e7 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -407,7 +407,7 @@ r6100_mtdlayout=mtdparts=ar934x-nfc:128k(u-boot)ro,256k(caldata),256k(caldata-ba wndr4300_mtdlayout=mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(caldata),512k(pot),2048k(language),512k(config),3072k(traffic_meter),2048k(kernel),23552k(ubi),25600k@0x6c0000(firmware),256k(caldata_backup),-(reserved) zcn1523h_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6208k(rootfs),1472k(kernel),64k(configure)ro,64k(mfg)ro,64k(art)ro,7680k@0x50000(firmware) mynet_n600_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro -mynet_rext_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,7808k(firmware),64k(nvram)ro,64k(ART)ro,6848k@0x130000(filesystem) +mynet_rext_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,7808k(firmware),64k(nvram)ro,64k(ART)ro zyx_nbg6716_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(env)ro,64k(RFdata)ro,-(nbu);ar934x-nfc:2048k(zyxel_rfsd),2048k(romd),1024k(header),2048k(kernel),-(ubi) qihoo_c301_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(devdata),64k(devconf),15744k(firmware),64k(warm_start),64k(action_image_config),64k(radiocfg)ro;spi0.1:15360k(upgrade2),1024k(privatedata) @@ -1301,7 +1301,7 @@ $(eval $(call SingleProfile,CameoDB120_8M,64kraw,TEW732BR,tew-732br,TEW-732BR,tt $(eval $(call SingleProfile,CyberTANGZIP,64k,WRT160NL,wrt160nl,WRT160NL,ttyS0,115200,,1.00.01)) -$(eval $(call SingleProfile,CyberTANLZMA,64k,MYNETREXT,mynet-rext,MYNET-REXT,ttyS0,115200,$$(mynet_rext_mtdlayout) root=31:4,1.00.01)) +$(eval $(call SingleProfile,CyberTANLZMA,64k,MYNETREXT,mynet-rext,MYNET-REXT,ttyS0,115200,$$(mynet_rext_mtdlayout) root=31:2,1.00.01)) $(eval $(call SingleProfile,CameoAP94,64kraw,DIR825B1,dir-825-b1,DIR-825-B1,ttyS0,115200,$$(cameo_ap94_mtdlayout),$$(cameo_ap94_mtdlayout_fat),01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00)) $(eval $(call SingleProfile,CameoAP94,64kraw,TEW673GRU,tew-673gru,TEW-673GRU,ttyS0,115200,$$(cameo_ap94_mtdlayout),$$(cameo_ap94_mtdlayout_fat),01AP94-AR7161-RT-080619-01,00AP94-AR7161-RT-080619-01)) -- 2.1.4 _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
