Hi Steven,
Thanks for the reply.
Here is my /etc/config/network configuration.
config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config interface 'lan'
option ifname 'eth0'
option type 'bridge'
option proto 'static'
option ipaddr '192.168.1.1'
option netmask '255.255.255.0'
option ip6addr 'fc00::4/7'
config interface 'wan0'
option proto 'pppoe'
option username 'admin'
option password 'admin'
option ifname 'eth1_wan0'
config interface 'wan1'
option proto 'pppoe'
option username 'qateam'
option password 'qateam'
option ifname 'ptm0_wan1'
config interface 'wan6'
option proto 'static'
option ifname 'eth1'
option ip6addr '2001::50'
config 'route6'
option 'interface' 'wan6'
option 'target' '2001::1/64'
option 'gateway' '2001::1'
config interface 'lq'
option proto 'dslite'
option ip6addr '2001::100'
option peeraddr '2001::200'
option tunlink 'wan6'
Thanks and regards
Sekhar Avutu
On Fri, Mar 13, 2015 at 5:08 PM, Steven Barth <[email protected]> wrote:
> Please post:
> your complete /etc/config/network
> the output of "ubus call network.interface dump"
>
> so we can see what's going on on your system.
> Your problem description is not really exhaustive.
>
>
> Also note that dslite doesn't support ipaddr or netmask parameters since
> RFC6333 specifies fixed IPv4 addresses so these parameters do nothing.
>
>
> Cheers,
>
> Steven
>
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
