>>>>> "John" == John Crispin <[email protected]> writes:
John> Hi Russel, can you also send a boot log of the failing soekris so
John> we can see if we have an idea on how to fix it ?
The failure is on Soekris net48xx (I am testing net4826, specifically).
Typically, the boot either hangs or resets immediately after Grub attempts to
boot
the kernel, after:
Booting `OpenWrt'
If I:
a) use the serial console to 'edit' the boot option, then launch with Ctrl-x;
or
b) edit (e.g. by mounting /dev/sda1 at /mnt and then
vi /mnt/boot/grub/grub.cfg) grub.cfg to remove the first two lines:
serial --unit=0 --speed=19200 --word=8 --parity=no --stop=1
terminal_input serial; terminal_output serial
then it boots and runs mostly normally. There may be a clock problem,
as the boot seems slow. The bootlog after employing option (b) above,
looks like this:
https://personaltelco.net/~russell/net4826-after-grub.cfg-edit-boot.log
--
Russell Senior, President
[email protected]
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
