Hi I have seen that this has been committed to trunk but please do it for barrier breaker as well. On Mar 15, 2015 6:31 AM, "Alpha Sparc" <[email protected]> wrote:
> Please Back port to Barrier Breaker I can confirm it occurs on WDR4300 on > Barrier Breaker as well. > On and Off states are swapped > On Mar 14, 2015 9:39 PM, "Daniel Petre" <[email protected]> wrote: > >> On 14/03/15 15:31, Matthias Schiffer wrote: >> >>> While the switch positions aren't explicitly labeled as on and off, >>> we've heard >>> complaints about them being wrong. >>> >> >> Hello, if this is about the wireless off/on switch i can confirm that >> with trunk on my tp-link wdr3600 v1.1 when it's on the "On" position the >> wifi is disabled and enabled when in the "Off" position. >> >> This patch changes the handling to match the >> >>> stock firmware. >>> >>> Signed-off-by: Matthias Schiffer <[email protected]> >>> --- >>> target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr4300.c | 1 + >>> 1 file changed, 1 insertion(+) >>> >>> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr4300.c >>> b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr4300.c >>> index 99ae80d..3afc714 100644 >>> --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr4300.c >>> +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr4300.c >>> @@ -103,6 +103,7 @@ static struct gpio_keys_button wdr4300_gpio_keys[] >>> __initdata = { >>> .code = KEY_RFKILL, >>> .debounce_interval = WDR4300_KEYS_DEBOUNCE_INTERVAL, >>> .gpio = WDR4300_GPIO_BTN_RFKILL, >>> + .active_low = 1, >>> }, >>> }; >>> >>> >>> _______________________________________________ >> openwrt-devel mailing list >> [email protected] >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >> >
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
