- Avoid bin image generation (only initramfs)
- NAND/WiFi not working

Signed-off-by: Álvaro Fernández Rojas <[email protected]>
---
 target/linux/brcm63xx/base-files/etc/diag.sh       |   3 +
 .../base-files/etc/uci-defaults/02_network         |   3 +-
 target/linux/brcm63xx/base-files/lib/brcm63xx.sh   |   3 +
 target/linux/brcm63xx/dts/vr-3032u.dts             | 142 +++++++++++++++++++++
 target/linux/brcm63xx/image/Makefile               |   6 +
 .../brcm63xx/patches-3.18/569-board_VR-3032u.patch |  65 ++++++++++
 target/linux/brcm63xx/profiles/comtrend.mk         |   9 ++
 7 files changed, 230 insertions(+), 1 deletion(-)
 create mode 100644 target/linux/brcm63xx/dts/vr-3032u.dts
 create mode 100644 target/linux/brcm63xx/patches-3.18/569-board_VR-3032u.patch

diff --git a/target/linux/brcm63xx/base-files/etc/diag.sh 
b/target/linux/brcm63xx/base-files/etc/diag.sh
index 928c02b..3d6531a 100644
--- a/target/linux/brcm63xx/base-files/etc/diag.sh
+++ b/target/linux/brcm63xx/base-files/etc/diag.sh
@@ -39,6 +39,9 @@ set_state() {
        vr-3025u)
                status_led="VR-3025u:green:power"
                ;;
+       vr-3032u)
+               status_led="VR-3032u:green:power"
+               ;;
        wap-5813n)
                status_led="WAP-5813n:green:power"
                ;;
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network 
b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
index df4e293..f320d4d 100644
--- a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
@@ -93,7 +93,8 @@ fast2504n |\
 fast2704v2 |\
 p870hw-51a_v2 |\
 vr-3025un |\
-vr-3025u)
+vr-3025u |\
+vr-3032u)
        ucidef_set_interface_lan "eth0.1"
        ucidef_add_switch "eth0" "1" "1"
        ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 8t"
diff --git a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh 
b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
index 2c18762..b64cb9e 100755
--- a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
+++ b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
@@ -84,6 +84,9 @@ brcm63xx_dt_detect() {
        "Comtrend VR-3025un")
                board_name="vr-3025un"
                ;;
+       "Comtrend VR-3032u")
+               board_name="vr-3032u"
+               ;;
        "Comtrend WAP-5813n")
                board_name="wap-5813n"
                ;;
diff --git a/target/linux/brcm63xx/dts/vr-3032u.dts 
b/target/linux/brcm63xx/dts/vr-3032u.dts
new file mode 100644
index 0000000..0d56394
--- /dev/null
+++ b/target/linux/brcm63xx/dts/vr-3032u.dts
@@ -0,0 +1,142 @@
+/dts-v1/;
+
+/include/ "bcm63268.dtsi"
+
+/ {
+       model = "Comtrend VR-3032u";
+       compatible = "comtrend,vr-3032u", "brcm,bcm63268";
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               debounce-interval = <60>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio1 0 1>;
+                       linux,code = <0x198>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio1 1 1>;
+                       linux,code = <0x211>;
+               };
+       };
+};
+
+&leds0 {
+       status = "ok";
+       brcm,serial-leds;
+
+       hw_gphy_spd0 {
+               compatible = "bcm6328-hw-led";
+               reg = <0>;
+               act-low = <16>;
+               label = "gphy-spd0";
+       };
+       hw_gphy_spd1 {
+               compatible = "bcm6328-hw-led";
+               reg = <1>;
+               act-low = <20>;
+               label = "gphy-spd1";
+       };
+       hw_ephy0_act {
+               compatible = "bcm6328-hw-led";
+               reg = <9>;
+               label = "ephy0-act";
+       };
+       hw_ephy1_act {
+               compatible = "bcm6328-hw-led";
+               reg = <10>;
+               label = "ephy1-act";
+       };
+       hw_ephy2_act {
+               compatible = "bcm6328-hw-led";
+               reg = <11>;
+               label = "ephy2-act";
+       };
+       hw_gphy0_act {
+               compatible = "bcm6328-hw-led";
+               reg = <12>;
+               label = "gphy0-act";
+       };
+       hw_ephy0_spd {
+               compatible = "bcm6328-hw-led";
+               reg = <13>;
+               label = "ephy0-spd";
+       };
+       hw_ephy1_spd {
+               compatible = "bcm6328-hw-led";
+               reg = <14>;
+               label = "ephy1-spd";
+       };
+       hw_ephy2_spd {
+               compatible = "bcm6328-hw-led";
+               reg = <15>;
+               label = "ephy2-spd";
+       };
+
+       inet_red {
+               compatible = "bcm6328-led";
+               reg = <2>;
+               active-low;
+               label = "VR-3032u:red:inet";
+       };
+       dsl_green {
+               compatible = "bcm6328-led";
+               reg = <3>;
+               active-low;
+               label = "VR-3032u:green:dsl";
+       };
+       usb_green {
+               compatible = "bcm6328-led";
+               reg = <4>;
+               active-low;
+               label = "VR-3032u:green:usb";
+       };
+       wps_green {
+               compatible = "bcm6328-led";
+               reg = <7>;
+               active-low;
+               label = "VR-3032u:green:wps";
+       };
+       inet_green {
+               compatible = "bcm6328-led";
+               reg = <8>;
+               active-low;
+               label = "VR-3032u:green:inet";
+       };
+       lan2_green {
+               compatible = "bcm6328-led";
+               reg = <9>;
+               active-low;
+               label = "VR-3032u:green:lan2";
+       };
+       lan3_green {
+               compatible = "bcm6328-led";
+               reg = <10>;
+               active-low;
+               label = "VR-3032u:green:lan3";
+       };
+       lan4_green {
+               compatible = "bcm6328-led";
+               reg = <11>;
+               active-low;
+               label = "VR-3032u:green:lan4";
+       };
+       lan1_green {
+               compatible = "bcm6328-led";
+               reg = <12>;
+               active-low;
+               label = "VR-3032u:green:lan1";
+       };
+       power_green {
+               compatible = "bcm6328-led";
+               reg = <20>;
+               active-low;
+               label = "VR-3032u:green:power";
+               default-state = "on";
+       };
+};
diff --git a/target/linux/brcm63xx/image/Makefile 
b/target/linux/brcm63xx/image/Makefile
index 3fb9b1c..afa2ec7 100755
--- a/target/linux/brcm63xx/image/Makefile
+++ b/target/linux/brcm63xx/image/Makefile
@@ -59,6 +59,10 @@ define Image/Build/CFEDTB
                --info2 $(1) $(6)
 endef
 
+define Image/Build/NANDCFEDTB
+       # NAND images not supported, only initramfs
+endef
+
 define Image/Build/OLDCFEDTB
        # Generate the tagged image
        $(TOPDIR)/scripts/brcmImage.pl -t -p \
@@ -274,6 +278,8 @@ $(eval $(call 
ImageDTB,CFEDTB,CT6373,CT-6373,ct-6373,CT6373-1,6358))
 $(eval $(call 
ImageDTB,CFEDTB,VR3025u,VR-3025u,vr-3025u,96368M-1541N,6368,--pad 16 
--image-offset 0x20000 --block-size 0x20000))
 # Comtrend VR-3025un
 $(eval $(call 
ImageDTB,CFEDTB,VR3025un,VR-3025un,vr-3025un,96368M-1341N,6368,--pad 4))
+# Comtrend VR-3032u
+$(eval $(call 
ImageDTB,NANDCFEDTB,VR3032u,VR-3032u,vr-3032u,963168M-1841N1,63268))
 # Comtrend WAP-5813n
 $(eval $(call 
ImageDTB,CFEDTB,WAP5813n,WAP-5813n,wap-5813n,96369R-1231N,6368,--pad 4))
 # D-Link DSL-2640B, rev B2
diff --git a/target/linux/brcm63xx/patches-3.18/569-board_VR-3032u.patch 
b/target/linux/brcm63xx/patches-3.18/569-board_VR-3032u.patch
new file mode 100644
index 0000000..9529921
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.18/569-board_VR-3032u.patch
@@ -0,0 +1,65 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2578,6 +2578,46 @@ static struct board_info __initdata boar
+       },
+ };
+ 
++static struct board_info __initdata board_VR3032u = {
++      .name                           = "963168M-1841N1",
++      .expected_cpu_id                = 0x63268,
++
++      .has_uart0                      = 1,
++
++      .has_ehci0                      = 1,
++      .has_ohci0                      = 1,
++      .num_usbh_ports                 = 1,
++
++      .has_enetsw                     = 1,
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "LAN2",
++                      },
++
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "LAN3",
++                      },
++
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "LAN4",
++                      },
++
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "LAN1",
++                      },
++              },
++      },
++};
++
+ static struct board_info __initdata board_vw6339gu = {
+       .name                           = "VW6339GU",
+       .expected_cpu_id                = 0x63268,
+@@ -2774,6 +2814,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_63268
+       &board_963268bu_p300,
+       &board_963269bhr,
++      &board_VR3032u,
+       &board_vw6339gu,
+ #endif
+ };
+@@ -2861,6 +2902,7 @@ static struct of_device_id const bcm963x
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
+       { .compatible = "brcm,bcm963268bu_p300", .data = &board_963268bu_p300, 
},
++      { .compatible = "comtrend,vr-3032u", .data = &board_VR3032u, },
+ #endif
+ #endif /* CONFIG_OF */
+       { },
diff --git a/target/linux/brcm63xx/profiles/comtrend.mk 
b/target/linux/brcm63xx/profiles/comtrend.mk
index 8c1b862..4145899 100644
--- a/target/linux/brcm63xx/profiles/comtrend.mk
+++ b/target/linux/brcm63xx/profiles/comtrend.mk
@@ -73,6 +73,15 @@ define Profile/VR3025un/Description
 endef
 $(eval $(call Profile,VR3025un))
 
+define Profile/VR3032u
+  NAME:=Comtrend VR-3032u
+  PACKAGES:=kmod-usb2 kmod-usb-ohci
+endef
+define Profile/VR3032u/Description
+  Package set optimized for VR-3032u.
+endef
+$(eval $(call Profile,VR3032u))
+
 define Profile/WAP5813n
   NAME:=Comtrend WAP-5813n
   PACKAGES:=kmod-b43 wpad-mini \
-- 
1.9.1
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel

Reply via email to