Hi, On Mittwoch, 11. März 2015 15:14:21 Shvedov Yury wrote:
> Thank you for your answer. We will try to solve this issue with our own > forces. any progress on this? I have one of these access points available right now for hacking (as long as I do not brick it). The last hours I made those findings: The libc of UBNT 3.2.7 seems to be compatible to tools of the old kamikaze release (http://downloads.openwrt.org/kamikaze/8.09/ar71xx/packages/). So far I've tested io for looking at the gpio ports and strace. It seems that the filter it not statically connected to gpio. By adressing AR71XX_GPIO_REG_SET and AR71XX_GPIO_REG_CLEAR, I could switch the blue and white leds as expected: /tmp/io -4 -w 0x18040010 1 # blue off /tmp/io -4 -w 0x1804000c 2 # white on Ten GPIO lines seem to be configured as output: /tmp/io -4 -r 0x18040000 18040000: 00000cff However, independant of the channel selected the ports are always set to 0x00081405 (or 0x00081404 or 0x00081406 depending on the LED setting): BZ.v3.2.7# /tmp/io -4 -r 0x18040004 18040004: 00081405 If anyone has ideas where else to look, please share. Meanwhile let's see what I can do with strace ;-) Stefan _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel