Signed-off-by: Rafał Miłecki <[email protected]> --- When reading bcmrobo.c code for BCM5301X I've noticed that it uses REG_CTRL_MIIPO (0x0e) with a following comment: /* default(1 << 1) DUPLX_MODE: * Full Duplex */ So I guess our bit definition may be reversed. Can someone verify this? --- target/linux/generic/files/drivers/net/phy/b53/b53_regs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/target/linux/generic/files/drivers/net/phy/b53/b53_regs.h b/target/linux/generic/files/drivers/net/phy/b53/b53_regs.h index ba50915..4899cc4 100644 --- a/target/linux/generic/files/drivers/net/phy/b53/b53_regs.h +++ b/target/linux/generic/files/drivers/net/phy/b53/b53_regs.h @@ -75,7 +75,7 @@ /* IMP Port state override register (8 bit) */ #define B53_PORT_OVERRIDE_CTRL 0x0e #define PORT_OVERRIDE_LINK BIT(0) -#define PORT_OVERRIDE_HALF_DUPLEX BIT(1) /* 0 = Full Duplex */ +#define PORT_OVERRIDE_FULL_DUPLEX BIT(1) /* 0 = Half Duplex */ #define PORT_OVERRIDE_SPEED_S 2 #define PORT_OVERRIDE_SPEED_10M (0 << PORT_OVERRIDE_SPEED_S) #define PORT_OVERRIDE_SPEED_100M (1 << PORT_OVERRIDE_SPEED_S) -- 1.8.4.5 _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
