This adds in-kernel support for the octeon mmc controller so that
Ubiquiti ER8 are now bootable from their internal storage.
Aimed at the BB branch but should work on trunk as well.
Pay attention to the change in default value for bb_size in
octeon_mmc.c, default was too large (256KB) and caused devm_kzalloc() to
fail. Otherwise, those are all patches released by Cavium themselves
and adapted to BB.
diff --git a/target/linux/octeon/config-default b/target/linux/octeon/config-default
index f83daac..f6c0e27 100644
--- a/target/linux/octeon/config-default
+++ b/target/linux/octeon/config-default
@@ -139,6 +139,10 @@ CONFIG_MIPS_L1_CACHE_SHIFT=7
# CONFIG_MIPS_MACHINE is not set
CONFIG_MIPS_MT_DISABLED=y
CONFIG_MIPS_PGD_C0_CONTEXT=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_OCTEON=y
+# CONFIG_MMC_TIFM_SD is not set
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_MODULES_USE_ELF_RELA=y
# CONFIG_MTD_CFI_INTELEXT is not set
diff --git a/target/linux/octeon/patches-3.10/0012-MIPS-octeon-add-semaphore-to-serialize-bootbus-access.patch b/target/linux/octeon/patches-3.10/0012-MIPS-octeon-add-semaphore-to-serialize-bootbus-access.patch
new file mode 100644
index 0000000..6650c5b
--- /dev/null
+++ b/target/linux/octeon/patches-3.10/0012-MIPS-octeon-add-semaphore-to-serialize-bootbus-access.patch
@@ -0,0 +1,25 @@
+diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
+index a42110e..01130e9 100644
+--- a/arch/mips/cavium-octeon/setup.c
++++ b/arch/mips/cavium-octeon/setup.c
+@@ -51,6 +51,9 @@ extern void pci_console_init(const char *arg);
+
+ static unsigned long long MAX_MEMORY = 512ull << 20;
+
++DEFINE_SEMAPHORE(octeon_bootbus_sem);
++EXPORT_SYMBOL(octeon_bootbus_sem);
++
+ struct octeon_boot_descriptor *octeon_boot_desc_ptr;
+
+ struct cvmx_bootinfo *octeon_bootinfo;
+diff --git a/arch/mips/include/asm/octeon/octeon.h b/arch/mips/include/asm/octeon/octeon.h
+index 0415965..de9f74e 100644
+--- a/arch/mips/include/asm/octeon/octeon.h
++++ b/arch/mips/include/asm/octeon/octeon.h
+@@ -335,4 +335,6 @@ void octeon_irq_set_ip4_handler(octeon_irq_ip4_handler_t);
+
+ extern void octeon_fixup_irqs(void);
+
++extern struct semaphore octeon_bootbus_sem;
++
+ #endif /* __ASM_OCTEON_OCTEON_H */
diff --git a/target/linux/octeon/patches-3.10/0013-MIPS-OCTEON-Update-octeon-model.h-code-for-new-SoCs.patch b/target/linux/octeon/patches-3.10/0013-MIPS-OCTEON-Update-octeon-model.h-code-for-new-SoCs.patch
new file mode 100644
index 0000000..c4d7347
--- /dev/null
+++ b/target/linux/octeon/patches-3.10/0013-MIPS-OCTEON-Update-octeon-model.h-code-for-new-SoCs.patch
@@ -0,0 +1,105 @@
+diff --git a/arch/mips/include/asm/octeon/octeon-model.h b/arch/mips/include/asm/octeon/octeon-model.h
+index e2c122c..35d7cbd 100644
+--- a/arch/mips/include/asm/octeon/octeon-model.h
++++ b/arch/mips/include/asm/octeon/octeon-model.h
+@@ -45,6 +45,7 @@
+ */
+
+ #define OCTEON_FAMILY_MASK 0x00ffff00
++#define OCTEON_PRID_MASK 0x00ffffff
+
+ /* Flag bits in top byte */
+ /* Ignores revision in model checks */
+@@ -63,6 +64,46 @@
+ #define OM_MATCH_6XXX_FAMILY_MODELS 0x40000000
+ /* Match all cnf7XXX Octeon models. */
+ #define OM_MATCH_F7XXX_FAMILY_MODELS 0x80000000
++/* Match all cn7XXX Octeon models. */
++#define OM_MATCH_7XXX_FAMILY_MODELS 0x10000000
++#define OM_MATCH_FAMILY_MODELS (OM_MATCH_5XXX_FAMILY_MODELS | \
++ OM_MATCH_6XXX_FAMILY_MODELS | \
++ OM_MATCH_F7XXX_FAMILY_MODELS | \
++ OM_MATCH_7XXX_FAMILY_MODELS)
++/*
++ * CN7XXX models with new revision encoding
++ */
++
++#define OCTEON_CN73XX_PASS1_0 0x000d9700
++#define OCTEON_CN73XX (OCTEON_CN73XX_PASS1_0 | OM_IGNORE_REVISION)
++#define OCTEON_CN73XX_PASS1_X (OCTEON_CN73XX_PASS1_0 | \
++ OM_IGNORE_MINOR_REVISION)
++
++#define OCTEON_CN70XX_PASS1_0 0x000d9600
++#define OCTEON_CN70XX_PASS1_1 0x000d9601
++#define OCTEON_CN70XX_PASS1_2 0x000d9602
++
++#define OCTEON_CN70XX_PASS2_0 0x000d9608
++
++#define OCTEON_CN70XX (OCTEON_CN70XX_PASS1_0 | OM_IGNORE_REVISION)
++#define OCTEON_CN70XX_PASS1_X (OCTEON_CN70XX_PASS1_0 | \
++ OM_IGNORE_MINOR_REVISION)
++#define OCTEON_CN70XX_PASS2_X (OCTEON_CN70XX_PASS2_0 | \
++ OM_IGNORE_MINOR_REVISION)
++
++#define OCTEON_CN71XX OCTEON_CN70XX
++
++#define OCTEON_CN78XX_PASS1_0 0x000d9500
++#define OCTEON_CN78XX_PASS1_1 0x000d9501
++#define OCTEON_CN78XX_PASS2_0 0x000d9508
++
++#define OCTEON_CN78XX (OCTEON_CN78XX_PASS1_0 | OM_IGNORE_REVISION)
++#define OCTEON_CN78XX_PASS1_X (OCTEON_CN78XX_PASS1_0 | \
++ OM_IGNORE_MINOR_REVISION)
++#define OCTEON_CN78XX_PASS2_X (OCTEON_CN78XX_PASS2_0 | \
++ OM_IGNORE_MINOR_REVISION)
++
++#define OCTEON_CN76XX (0x000d9540 | OM_CHECK_SUBMODEL)
+
+ /*
+ * CNF7XXX models with new revision encoding
+@@ -217,6 +258,10 @@
+ #define OCTEON_CN3XXX (OCTEON_CN58XX_PASS1_0 | OM_MATCH_PREVIOUS_MODELS | OM_IGNORE_REVISION)
+ #define OCTEON_CN5XXX (OCTEON_CN58XX_PASS1_0 | OM_MATCH_5XXX_FAMILY_MODELS)
+ #define OCTEON_CN6XXX (OCTEON_CN63XX_PASS1_0 | OM_MATCH_6XXX_FAMILY_MODELS)
++#define OCTEON_CNF7XXX (OCTEON_CNF71XX_PASS1_0 | \
++ OM_MATCH_F7XXX_FAMILY_MODELS)
++#define OCTEON_CN7XXX (OCTEON_CN78XX_PASS1_0 | \
++ OM_MATCH_7XXX_FAMILY_MODELS)
+
+ /* These are used to cover entire families of OCTEON processors */
+ #define OCTEON_FAM_1 (OCTEON_CN3XXX)
+@@ -288,9 +333,16 @@ static inline uint64_t cvmx_read_csr(uint64_t csr_addr);
+ ((((arg_model) & (OM_FLAG_MASK)) == OM_CHECK_SUBMODEL) \
+ && __OCTEON_MATCH_MASK__((chip_model), (arg_model), OCTEON_58XX_MODEL_REV_MASK)) || \
+ ((((arg_model) & (OM_MATCH_5XXX_FAMILY_MODELS)) == OM_MATCH_5XXX_FAMILY_MODELS) \
+- && ((chip_model) >= OCTEON_CN58XX_PASS1_0) && ((chip_model) < OCTEON_CN63XX_PASS1_0)) || \
++ && ((chip_model & OCTEON_PRID_MASK) >= OCTEON_CN58XX_PASS1_0) \
++ && ((chip_model & OCTEON_PRID_MASK) < OCTEON_CN63XX_PASS1_0)) || \
+ ((((arg_model) & (OM_MATCH_6XXX_FAMILY_MODELS)) == OM_MATCH_6XXX_FAMILY_MODELS) \
+- && ((chip_model) >= OCTEON_CN63XX_PASS1_0)) || \
++ && ((chip_model & OCTEON_PRID_MASK) >= OCTEON_CN63XX_PASS1_0) \
++ && ((chip_model & OCTEON_PRID_MASK) < OCTEON_CNF71XX_PASS1_0)) || \
++ ((((arg_model) & (OM_MATCH_F7XXX_FAMILY_MODELS)) == OM_MATCH_F7XXX_FAMILY_MODELS) \
++ && ((chip_model & OCTEON_PRID_MASK) >= OCTEON_CNF71XX_PASS1_0) \
++ && ((chip_model & OCTEON_PRID_MASK) < OCTEON_CN78XX_PASS1_0)) || \
++ ((((arg_model) & (OM_MATCH_7XXX_FAMILY_MODELS)) == OM_MATCH_7XXX_FAMILY_MODELS) \
++ && ((chip_model & OCTEON_PRID_MASK) >= OCTEON_CN78XX_PASS1_0)) || \
+ ((((arg_model) & (OM_MATCH_PREVIOUS_MODELS)) == OM_MATCH_PREVIOUS_MODELS) \
+ && (((chip_model) & OCTEON_58XX_MODEL_MASK) < ((arg_model) & OCTEON_58XX_MODEL_MASK))) \
+ )))
+@@ -326,6 +378,15 @@ static inline int __octeon_is_model_runtime__(uint32_t model)
+ #define OCTEON_IS_COMMON_BINARY() 1
+ #undef OCTEON_MODEL
+
++#define OCTEON_IS_OCTEON1() OCTEON_IS_MODEL(OCTEON_CN3XXX)
++#define OCTEON_IS_OCTEONPLUS() OCTEON_IS_MODEL(OCTEON_CN5XXX)
++#define OCTEON_IS_OCTEON2() \
++ (OCTEON_IS_MODEL(OCTEON_CN6XXX) || OCTEON_IS_MODEL(OCTEON_CNF71XX))
++
++#define OCTEON_IS_OCTEON3() OCTEON_IS_MODEL(OCTEON_CN7XXX)
++
++#define OCTEON_IS_OCTEON1PLUS() (OCTEON_IS_OCTEON1() || OCTEON_IS_OCTEONPLUS())
++
+ const char *octeon_model_get_string(uint32_t chip_id);
+ const char *octeon_model_get_string_buffer(uint32_t chip_id, char *buffer);
+
diff --git a/target/linux/octeon/patches-3.10/0014-mmc-octeon-add-host-driver-for-octeon-mmc-controller.patch b/target/linux/octeon/patches-3.10/0014-mmc-octeon-add-host-driver-for-octeon-mmc-controller.patch
new file mode 100644
index 0000000..41b5c89
--- /dev/null
+++ b/target/linux/octeon/patches-3.10/0014-mmc-octeon-add-host-driver-for-octeon-mmc-controller.patch
@@ -0,0 +1,1632 @@
+diff --git a/Documentation/devicetree/bindings/mmc/octeon-mmc.txt b/Documentation/devicetree/bindings/mmc/octeon-mmc.txt
+new file mode 100644
+index 0000000..40dd7f1
+--- /dev/null
++++ b/Documentation/devicetree/bindings/mmc/octeon-mmc.txt
+@@ -0,0 +1,69 @@
++* OCTEON SD/MMC Host Controller
++
++This controller is present on some members of the Cavium OCTEON SoC
++family, provide an interface for eMMC, MMC and SD devices. There is a
++single controller that may have several "slots" connected. These
++slots appear as children of the main controller node.
++The DMA engine is an integral part of the controller block.
++
++Required properties:
++- compatible : Should be "cavium,octeon-6130-mmc" or "cavium,octeon-7890-mmc"
++- reg : Two entries:
++ 1) The base address of the MMC controller register bank.
++ 2) The base address of the MMC DMA engine register bank.
++- interrupts :
++ For "cavium,octeon-6130-mmc": two entries:
++ 1) The MMC controller interrupt line.
++ 2) The MMC DMA engine interrupt line.
++ For "cavium,octeon-7890-mmc": nine entries:
++ 1) The next block transfer of a multiblock transfer has completed (BUF_DONE)
++ 2) Operation completed successfully (CMD_DONE).
++ 3) DMA transfer completed successfully (DMA_DONE).
++ 4) Operation encountered an error (CMD_ERR).
++ 5) DMA transfer encountered an error (DMA_ERR).
++ 6) Switch operation completed successfully (SWITCH_DONE).
++ 7) Switch operation encountered an error (SWITCH_ERR).
++ 8) Internal DMA engine request completion interrupt (DONE).
++ 9) Internal DMA FIFO underflow (FIFO).
++- #address-cells : Must be <1>
++- #size-cells : Must be <0>
++
++Required properties of child nodes:
++- compatible : Should be "cavium,octeon-6130-mmc-slot".
++- reg : The slot number.
++
++Optional properties of child nodes:
++- cd-gpios : Specify GPIOs for card detection
++- wp-gpios : Specify GPIOs for write protection
++- power-gpios : Specify GPIOs for power control
++- cavium,bus-max-width : The number of data lines present in the slot.
++ Default is 8.
++- spi-max-frequency : The maximum operating frequency of the slot.
++ Default is 52000000.
++- cavium,cmd-clk-skew : the amount of delay (in pS) past the clock edge
++ to sample the command pin.
++- cavium,dat-clk-skew : the amount of delay (in pS) past the clock edge
++ to sample the data pin.
++
++Example:
++ mmc@1180000002000 {
++ compatible = "cavium,octeon-6130-mmc";
++ reg = <0x11800 0x00002000 0x0 0x100>,
++ <0x11800 0x00000168 0x0 0x20>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ /* EMM irq, DMA irq */
++ interrupts = <1 19>, <0 63>;
++
++ /* The board only has a single MMC slot */
++ mmc-slot@0 {
++ compatible = "cavium,octeon-6130-mmc-slot";
++ reg = <0>;
++ spi-max-frequency = <20000000>;
++ /* bus width can be 1, 4 or 8 */
++ cavium,bus-max-width = <8>;
++ cd-gpios = <&gpio 9 0>;
++ wp-gpios = <&gpio 10 0>;
++ power-gpios = <&gpio 8 0>;
++ };
++ };
+diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
+index 2d6fbdd..5077dfa 100644
+--- a/drivers/mmc/host/Kconfig
++++ b/drivers/mmc/host/Kconfig
+@@ -338,6 +338,16 @@
+
+ If unsure, say N.
+
++config MMC_OCTEON
++ tristate "Cavium OCTEON Multimedia Card Interface support"
++ depends on CAVIUM_OCTEON_REFERENCE_BOARD
++ help
++ This selects Cavium OCTEON Multimedia card Interface.
++ If you have an OCTEON board with a Multimedia Card slot,
++ say Y or M here.
++
++ If unsure, say N.
++
+ config MMC_TIFM_SD
+ tristate "TI Flash Media MMC/SD Interface support"
+ depends on PCI
+diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
+index f7b0a77..448bbc9 100644
+--- a/drivers/mmc/host/Makefile
++++ b/drivers/mmc/host/Makefile
+@@ -19,6 +19,7 @@ obj-$(CONFIG_MMC_SDHCI_SIRF) += sdhci-sirf.o
+ obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o
+ obj-$(CONFIG_MMC_WBSD) += wbsd.o
+ obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
++obj-$(CONFIG_MMC_OCTEON) += octeon_mmc.o
+ obj-$(CONFIG_MMC_OMAP) += omap.o
+ obj-$(CONFIG_MMC_OMAP_HS) += omap_hsmmc.o
+ obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o
+diff --git a/drivers/mmc/host/octeon_mmc.c b/drivers/mmc/host/octeon_mmc.c
+new file mode 100644
+index 0000000..baba5a0
+--- /dev/null
++++ b/drivers/mmc/host/octeon_mmc.c
+@@ -0,0 +1,1518 @@
++/*
++ * Driver for MMC and SSD cards for Cavium OCTEON SOCs.
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2012-2014 Cavium Inc.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/of_platform.h>
++#include <linux/scatterlist.h>
++#include <linux/interrupt.h>
++#include <linux/of_gpio.h>
++#include <linux/blkdev.h>
++#include <linux/device.h>
++#include <linux/module.h>
++#include <linux/delay.h>
++#include <linux/init.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/io.h>
++#include <linux/of.h>
++
++#include <linux/mmc/card.h>
++#include <linux/mmc/host.h>
++#include <linux/mmc/mmc.h>
++#include <linux/mmc/sd.h>
++#include <net/irda/parameters.h>
++
++#include <asm/byteorder.h>
++#include <asm/octeon/octeon.h>
++#include <asm/octeon/cvmx-mio-defs.h>
++
++#define DRV_NAME "octeon_mmc"
++
++#define OCTEON_MAX_MMC 4
++
++#define OCT_MIO_NDF_DMA_CFG 0x00
++#define OCT_MIO_EMM_DMA_ADR 0x08
++
++#define OCT_MIO_EMM_CFG 0x00
++#define OCT_MIO_EMM_SWITCH 0x48
++#define OCT_MIO_EMM_DMA 0x50
++#define OCT_MIO_EMM_CMD 0x58
++#define OCT_MIO_EMM_RSP_STS 0x60
++#define OCT_MIO_EMM_RSP_LO 0x68
++#define OCT_MIO_EMM_RSP_HI 0x70
++#define OCT_MIO_EMM_INT 0x78
++#define OCT_MIO_EMM_INT_EN 0x80
++#define OCT_MIO_EMM_WDOG 0x88
++#define OCT_MIO_EMM_SAMPLE 0x90
++#define OCT_MIO_EMM_STS_MASK 0x98
++#define OCT_MIO_EMM_RCA 0xa0
++#define OCT_MIO_EMM_BUF_IDX 0xe0
++#define OCT_MIO_EMM_BUF_DAT 0xe8
++
++#define CVMX_MIO_BOOT_CTL CVMX_ADD_IO_SEG(0x00011800000000D0ull)
++
++struct octeon_mmc_host {
++ u64 base;
++ u64 ndf_base;
++ u64 emm_cfg;
++ u64 n_minus_one; /* OCTEON II workaround location */
++ int last_slot;
++
++ struct semaphore mmc_serializer;
++ struct mmc_request *current_req;
++ unsigned int linear_buf_size;
++ void *linear_buf;
++ struct sg_mapping_iter smi;
++ int sg_idx;
++ bool dma_active;
++
++ struct platform_device *pdev;
++ int global_pwr_gpio;
++ bool global_pwr_gpio_low;
++ bool dma_err_pending;
++ bool need_bootbus_lock;
++ bool big_dma_addr;
++ bool need_irq_handler_lock;
++ spinlock_t irq_handler_lock;
++
++ struct octeon_mmc_slot *slot[OCTEON_MAX_MMC];
++};
++
++struct octeon_mmc_slot {
++ struct mmc_host *mmc; /* slot-level mmc_core object */
++ struct octeon_mmc_host *host; /* common hw for all 4 slots */
++
++ unsigned int clock;
++ unsigned int sclock;
++
++ u64 cached_switch;
++ u64 cached_rca;
++
++ unsigned int cmd_cnt; /* sample delay */
++ unsigned int dat_cnt; /* sample delay */
++
++ int bus_width;
++ int bus_id;
++ int ro_gpio;
++ int cd_gpio;
++ int pwr_gpio;
++ bool cd_gpio_low;
++ bool ro_gpio_low;
++ bool pwr_gpio_low;
++};
++
++static int bb_size = 1 << 16;
++module_param(bb_size, int, S_IRUGO);
++MODULE_PARM_DESC(bb_size,
++ "Size of DMA linearizing buffer (max transfer size).");
++
++static int ddr = 2;
++module_param(ddr, int, S_IRUGO);
++MODULE_PARM_DESC(ddr,
++ "enable DoubleDataRate clocking: 0=no, 1=always, 2=at spi-max-frequency/2");
++
++#if 0
++#define octeon_mmc_dbg trace_printk
++#else
++static inline void octeon_mmc_dbg(const char *s, ...) { }
++#endif
++
++static void octeon_mmc_acquire_bus(struct octeon_mmc_host *host)
++{
++ if (host->need_bootbus_lock) {
++ down(&octeon_bootbus_sem);
++ /* On cn70XX switch the mmc unit onto the bus. */
++ if (OCTEON_IS_MODEL(OCTEON_CN70XX))
++ cvmx_write_csr(CVMX_MIO_BOOT_CTL, 0);
++ } else {
++ down(&host->mmc_serializer);
++ }
++}
++
++static void octeon_mmc_release_bus(struct octeon_mmc_host *host)
++{
++ if (host->need_bootbus_lock)
++ up(&octeon_bootbus_sem);
++ else
++ up(&host->mmc_serializer);
++}
++
++struct octeon_mmc_cr_type {
++ u8 ctype;
++ u8 rtype;
++};
++
++/*
++ * The OCTEON MMC host hardware assumes that all commands have fixed
++ * command and response types. These are correct if MMC devices are
++ * being used. However, non-MMC devices like SD use command and
++ * response types that are unexpected by the host hardware.
++ *
++ * The command and response types can be overridden by supplying an
++ * XOR value that is applied to the type. We calculate the XOR value
++ * from the values in this table and the flags passed from the MMC
++ * core.
++ */
++static struct octeon_mmc_cr_type octeon_mmc_cr_types[] = {
++ {0, 0}, /* CMD0 */
++ {0, 3}, /* CMD1 */
++ {0, 2}, /* CMD2 */
++ {0, 1}, /* CMD3 */
++ {0, 0}, /* CMD4 */
++ {0, 1}, /* CMD5 */
++ {0, 1}, /* CMD6 */
++ {0, 1}, /* CMD7 */
++ {1, 1}, /* CMD8 */
++ {0, 2}, /* CMD9 */
++ {0, 2}, /* CMD10 */
++ {1, 1}, /* CMD11 */
++ {0, 1}, /* CMD12 */
++ {0, 1}, /* CMD13 */
++ {1, 1}, /* CMD14 */
++ {0, 0}, /* CMD15 */
++ {0, 1}, /* CMD16 */
++ {1, 1}, /* CMD17 */
++ {1, 1}, /* CMD18 */
++ {3, 1}, /* CMD19 */
++ {2, 1}, /* CMD20 */
++ {0, 0}, /* CMD21 */
++ {0, 0}, /* CMD22 */
++ {0, 1}, /* CMD23 */
++ {2, 1}, /* CMD24 */
++ {2, 1}, /* CMD25 */
++ {2, 1}, /* CMD26 */
++ {2, 1}, /* CMD27 */
++ {0, 1}, /* CMD28 */
++ {0, 1}, /* CMD29 */
++ {1, 1}, /* CMD30 */
++ {1, 1}, /* CMD31 */
++ {0, 0}, /* CMD32 */
++ {0, 0}, /* CMD33 */
++ {0, 0}, /* CMD34 */
++ {0, 1}, /* CMD35 */
++ {0, 1}, /* CMD36 */
++ {0, 0}, /* CMD37 */
++ {0, 1}, /* CMD38 */
++ {0, 4}, /* CMD39 */
++ {0, 5}, /* CMD40 */
++ {0, 0}, /* CMD41 */
++ {2, 1}, /* CMD42 */
++ {0, 0}, /* CMD43 */
++ {0, 0}, /* CMD44 */
++ {0, 0}, /* CMD45 */
++ {0, 0}, /* CMD46 */
++ {0, 0}, /* CMD47 */
++ {0, 0}, /* CMD48 */
++ {0, 0}, /* CMD49 */
++ {0, 0}, /* CMD50 */
++ {0, 0}, /* CMD51 */
++ {0, 0}, /* CMD52 */
++ {0, 0}, /* CMD53 */
++ {0, 0}, /* CMD54 */
++ {0, 1}, /* CMD55 */
++ {0xff, 0xff}, /* CMD56 */
++ {0, 0}, /* CMD57 */
++ {0, 0}, /* CMD58 */
++ {0, 0}, /* CMD59 */
++ {0, 0}, /* CMD60 */
++ {0, 0}, /* CMD61 */
++ {0, 0}, /* CMD62 */
++ {0, 0} /* CMD63 */
++};
++
++struct octeon_mmc_cr_mods {
++ u8 ctype_xor;
++ u8 rtype_xor;
++};
++
++/*
++ * The functions below are used for the EMMC-17978 workaround.
++ *
++ * Due to an imperfection in the design of the MMC bus hardware,
++ * the 2nd to last cache block of a DMA read must be locked into the L2 Cache.
++ * Otherwise, data corruption may occur.
++ */
++
++static inline void *phys_to_ptr(u64 address)
++{
++ return (void *)(address | (1ull<<63)); /* XKPHYS */
++}
++
++/**
++ * Lock a single line into L2. The line is zeroed before locking
++ * to make sure no dram accesses are made.
++ *
++ * @addr Physical address to lock
++ */
++static void l2c_lock_line(u64 addr)
++{
++ char *addr_ptr = phys_to_ptr(addr);
++
++ asm volatile (
++ "cache 31, %[line]" /* Unlock the line */
++ :: [line] "m" (*addr_ptr));
++}
++
++/**
++ * Locks a memory region in the L2 cache
++ *
++ * @start - start address to begin locking
++ * @len - length in bytes to lock
++ */
++static void l2c_lock_mem_region(u64 start, u64 len)
++{
++ u64 end;
++
++ /* Round start/end to cache line boundaries */
++ end = ALIGN(start + len - 1, CVMX_CACHE_LINE_SIZE);
++ start = ALIGN(start, CVMX_CACHE_LINE_SIZE);
++
++ while (start <= end) {
++ l2c_lock_line(start);
++ start += CVMX_CACHE_LINE_SIZE;
++ }
++ asm volatile("sync");
++}
++
++/**
++ * Unlock a single line in the L2 cache.
++ *
++ * @addr Physical address to unlock
++ *
++ * Return Zero on success
++ */
++static void l2c_unlock_line(u64 addr)
++{
++ char *addr_ptr = phys_to_ptr(addr);
++ asm volatile (
++ "cache 23, %[line]" /* Unlock the line */
++ :: [line] "m" (*addr_ptr));
++}
++
++/**
++ * Unlock a memory region in the L2 cache
++ *
++ * @start - start address to unlock
++ * @len - length to unlock in bytes
++ */
++static void l2c_unlock_mem_region(u64 start, u64 len)
++{
++ u64 end;
++
++ /* Round start/end to cache line boundaries */
++ end = ALIGN(start + len - 1, CVMX_CACHE_LINE_SIZE);
++ start = ALIGN(start, CVMX_CACHE_LINE_SIZE);
++
++ while (start <= end) {
++ l2c_unlock_line(start);
++ start += CVMX_CACHE_LINE_SIZE;
++ }
++}
++
++static struct octeon_mmc_cr_mods octeon_mmc_get_cr_mods(struct mmc_command *cmd)
++{
++ struct octeon_mmc_cr_type *cr;
++ u8 desired_ctype, hardware_ctype;
++ u8 desired_rtype, hardware_rtype;
++ struct octeon_mmc_cr_mods r;
++
++ desired_ctype = desired_rtype = 0;
++
++ cr = octeon_mmc_cr_types + (cmd->opcode & 0x3f);
++ hardware_ctype = cr->ctype;
++ hardware_rtype = cr->rtype;
++ if (cmd->opcode == 56) { /* CMD56 GEN_CMD */
++ hardware_ctype = (cmd->arg & 1) ? 1 : 2;
++ }
++
++ switch (mmc_cmd_type(cmd)) {
++ case MMC_CMD_ADTC:
++ desired_ctype = (cmd->data->flags & MMC_DATA_WRITE) ? 2 : 1;
++ break;
++ case MMC_CMD_AC:
++ case MMC_CMD_BC:
++ case MMC_CMD_BCR:
++ desired_ctype = 0;
++ break;
++ }
++
++ switch (mmc_resp_type(cmd)) {
++ case MMC_RSP_NONE:
++ desired_rtype = 0;
++ break;
++ case MMC_RSP_R1:/* MMC_RSP_R5, MMC_RSP_R6, MMC_RSP_R7 */
++ case MMC_RSP_R1B:
++ desired_rtype = 1;
++ break;
++ case MMC_RSP_R2:
++ desired_rtype = 2;
++ break;
++ case MMC_RSP_R3: /* MMC_RSP_R4 */
++ desired_rtype = 3;
++ break;
++ }
++ r.ctype_xor = desired_ctype ^ hardware_ctype;
++ r.rtype_xor = desired_rtype ^ hardware_rtype;
++ return r;
++}
++
++static bool octeon_mmc_switch_val_changed(struct octeon_mmc_slot *slot,
++ u64 new_val)
++{
++ /* Match BUS_ID, HS_TIMING, BUS_WIDTH, POWER_CLASS, CLK_HI, CLK_LO */
++ u64 m = 0x3001070fffffffffull;
++
++ return (slot->cached_switch & m) != (new_val & m);
++}
++
++static unsigned int octeon_mmc_timeout_to_wdog(struct octeon_mmc_slot *slot,
++ unsigned int ns)
++{
++ u64 bt = (u64)slot->clock * (u64)ns;
++
++ return (unsigned int)(bt / 1000000000);
++}
++
++static irqreturn_t octeon_mmc_interrupt(int irq, void *dev_id)
++{
++ struct octeon_mmc_host *host = dev_id;
++ union cvmx_mio_emm_int emm_int;
++ struct mmc_request *req;
++ bool host_done;
++ union cvmx_mio_emm_rsp_sts rsp_sts;
++ unsigned long flags = 0;
++
++ if (host->need_irq_handler_lock)
++ spin_lock_irqsave(&host->irq_handler_lock, flags);
++ emm_int.u64 = cvmx_read_csr(host->base + OCT_MIO_EMM_INT);
++ req = host->current_req;
++ cvmx_write_csr(host->base + OCT_MIO_EMM_INT, emm_int.u64);
++
++ octeon_mmc_dbg("Got interrupt: EMM_INT = 0x%llx\n", emm_int.u64);
++
++ if (!req)
++ goto out;
++
++ rsp_sts.u64 = cvmx_read_csr(host->base + OCT_MIO_EMM_RSP_STS);
++ octeon_mmc_dbg("octeon_mmc_interrupt MIO_EMM_RSP_STS 0x%llx\n",
++ rsp_sts.u64);
++
++ if (host->dma_err_pending) {
++ host->current_req = NULL;
++ host->dma_err_pending = false;
++ req->done(req);
++ host_done = true;
++ goto no_req_done;
++ }
++
++ if (!host->dma_active && emm_int.s.buf_done && req->data) {
++ unsigned int type = (rsp_sts.u64 >> 7) & 3;
++
++ if (type == 1) {
++ /* Read */
++ int dbuf = rsp_sts.s.dbuf;
++ struct sg_mapping_iter *smi = &host->smi;
++ unsigned int data_len =
++ req->data->blksz * req->data->blocks;
++ unsigned int bytes_xfered;
++ u64 dat = 0;
++ int shift = -1;
++
++ /* Auto inc from offset zero */
++ cvmx_write_csr(host->base + OCT_MIO_EMM_BUF_IDX,
++ (u64)(0x10000 | (dbuf << 6)));
++
++ for (bytes_xfered = 0; bytes_xfered < data_len;) {
++ if (smi->consumed >= smi->length) {
++ if (!sg_miter_next(smi))
++ break;
++ smi->consumed = 0;
++ }
++ if (shift < 0) {
++ dat = cvmx_read_csr(host->base +
++ OCT_MIO_EMM_BUF_DAT);
++ shift = 56;
++ }
++
++ while (smi->consumed < smi->length &&
++ shift >= 0) {
++ ((u8 *)(smi->addr))[smi->consumed] =
++ (dat >> shift) & 0xff;
++ bytes_xfered++;
++ smi->consumed++;
++ shift -= 8;
++ }
++ }
++ sg_miter_stop(smi);
++ req->data->bytes_xfered = bytes_xfered;
++ req->data->error = 0;
++ } else if (type == 2) {
++ /* write */
++ req->data->bytes_xfered = req->data->blksz *
++ req->data->blocks;
++ req->data->error = 0;
++ }
++ }
++ host_done = emm_int.s.cmd_done || emm_int.s.dma_done ||
++ emm_int.s.cmd_err || emm_int.s.dma_err;
++ if (host_done && req->done) {
++ if (rsp_sts.s.rsp_bad_sts ||
++ rsp_sts.s.rsp_crc_err ||
++ rsp_sts.s.rsp_timeout ||
++ rsp_sts.s.blk_crc_err ||
++ rsp_sts.s.blk_timeout ||
++ rsp_sts.s.dbuf_err) {
++ req->cmd->error = -EILSEQ;
++ } else {
++ req->cmd->error = 0;
++ }
++
++ if (host->dma_active && req->data) {
++ req->data->error = 0;
++ req->data->bytes_xfered = req->data->blocks *
++ req->data->blksz;
++ if (!(req->data->flags & MMC_DATA_WRITE) &&
++ req->data->sg_len > 1) {
++ size_t r = sg_copy_from_buffer(req->data->sg,
++ req->data->sg_len, host->linear_buf,
++ req->data->bytes_xfered);
++ WARN_ON(r != req->data->bytes_xfered);
++ }
++ }
++ if (rsp_sts.s.rsp_val) {
++ u64 rsp_hi;
++ u64 rsp_lo = cvmx_read_csr(
++ host->base + OCT_MIO_EMM_RSP_LO);
++
++ switch (rsp_sts.s.rsp_type) {
++ case 1:
++ case 3:
++ req->cmd->resp[0] = (rsp_lo >> 8) & 0xffffffff;
++ req->cmd->resp[1] = 0;
++ req->cmd->resp[2] = 0;
++ req->cmd->resp[3] = 0;
++ break;
++ case 2:
++ req->cmd->resp[3] = rsp_lo & 0xffffffff;
++ req->cmd->resp[2] = (rsp_lo >> 32) & 0xffffffff;
++ rsp_hi = cvmx_read_csr(host->base +
++ OCT_MIO_EMM_RSP_HI);
++ req->cmd->resp[1] = rsp_hi & 0xffffffff;
++ req->cmd->resp[0] = (rsp_hi >> 32) & 0xffffffff;
++ break;
++ default:
++ octeon_mmc_dbg("octeon_mmc_interrupt unhandled rsp_val %d\n",
++ rsp_sts.s.rsp_type);
++ break;
++ }
++ octeon_mmc_dbg("octeon_mmc_interrupt resp %08x %08x %08x %08x\n",
++ req->cmd->resp[0], req->cmd->resp[1],
++ req->cmd->resp[2], req->cmd->resp[3]);
++ }
++ if (emm_int.s.dma_err && rsp_sts.s.dma_pend) {
++ /* Try to clean up failed DMA */
++ union cvmx_mio_emm_dma emm_dma;
++
++ emm_dma.u64 =
++ cvmx_read_csr(host->base + OCT_MIO_EMM_DMA);
++ emm_dma.s.dma_val = 1;
++ emm_dma.s.dat_null = 1;
++ emm_dma.s.bus_id = rsp_sts.s.bus_id;
++ cvmx_write_csr(host->base + OCT_MIO_EMM_DMA,
++ emm_dma.u64);
++ host->dma_err_pending = true;
++ host_done = false;
++ goto no_req_done;
++ }
++
++ host->current_req = NULL;
++ req->done(req);
++ }
++no_req_done:
++ if (host->n_minus_one) {
++ l2c_unlock_mem_region(host->n_minus_one, 512);
++ host->n_minus_one = 0;
++ }
++ if (host_done)
++ octeon_mmc_release_bus(host);
++out:
++ if (host->need_irq_handler_lock)
++ spin_unlock_irqrestore(&host->irq_handler_lock, flags);
++ return IRQ_RETVAL(emm_int.u64 != 0);
++}
++
++static void octeon_mmc_switch_to(struct octeon_mmc_slot *slot)
++{
++ struct octeon_mmc_host *host = slot->host;
++ struct octeon_mmc_slot *old_slot;
++ union cvmx_mio_emm_switch sw;
++ union cvmx_mio_emm_sample samp;
++
++ if (slot->bus_id == host->last_slot)
++ goto out;
++
++ if (host->last_slot >= 0) {
++ old_slot = host->slot[host->last_slot];
++ old_slot->cached_switch =
++ cvmx_read_csr(host->base + OCT_MIO_EMM_SWITCH);
++ old_slot->cached_rca =
++ cvmx_read_csr(host->base + OCT_MIO_EMM_RCA);
++ }
++ cvmx_write_csr(host->base + OCT_MIO_EMM_RCA, slot->cached_rca);
++ sw.u64 = slot->cached_switch;
++ sw.s.bus_id = 0;
++ cvmx_write_csr(host->base + OCT_MIO_EMM_SWITCH, sw.u64);
++ sw.s.bus_id = slot->bus_id;
++ cvmx_write_csr(host->base + OCT_MIO_EMM_SWITCH, sw.u64);
++
++ samp.u64 = 0;
++ samp.s.cmd_cnt = slot->cmd_cnt;
++ samp.s.dat_cnt = slot->dat_cnt;
++ cvmx_write_csr(host->base + OCT_MIO_EMM_SAMPLE, samp.u64);
++out:
++ host->last_slot = slot->bus_id;
++}
++
++static void octeon_mmc_dma_request(struct mmc_host *mmc,
++ struct mmc_request *mrq)
++{
++ struct octeon_mmc_slot *slot;
++ struct octeon_mmc_host *host;
++ struct mmc_command *cmd;
++ struct mmc_data *data;
++ union cvmx_mio_emm_int emm_int;
++ union cvmx_mio_emm_dma emm_dma;
++ union cvmx_mio_ndf_dma_cfg dma_cfg;
++
++ cmd = mrq->cmd;
++ if (mrq->data == NULL || mrq->data->sg == NULL || !mrq->data->sg_len ||
++ mrq->stop == NULL || mrq->stop->opcode != MMC_STOP_TRANSMISSION) {
++ dev_err(&mmc->card->dev,
++ "Error: octeon_mmc_dma_request no data\n");
++ cmd->error = -EINVAL;
++ if (mrq->done)
++ mrq->done(mrq);
++ return;
++ }
++
++ slot = mmc_priv(mmc);
++ host = slot->host;
++
++ /* Only a single user of the bootbus at a time. */
++ octeon_mmc_acquire_bus(host);
++
++ octeon_mmc_switch_to(slot);
++
++ data = mrq->data;
++
++ if (data->timeout_ns) {
++ cvmx_write_csr(host->base + OCT_MIO_EMM_WDOG,
++ octeon_mmc_timeout_to_wdog(slot, data->timeout_ns));
++ octeon_mmc_dbg("OCT_MIO_EMM_WDOG %llu\n",
++ cvmx_read_csr(host->base + OCT_MIO_EMM_WDOG));
++ }
++
++ WARN_ON(host->current_req);
++ host->current_req = mrq;
++
++ host->sg_idx = 0;
++
++ WARN_ON(data->blksz * data->blocks > host->linear_buf_size);
++
++ if ((data->flags & MMC_DATA_WRITE) && data->sg_len > 1) {
++ size_t r = sg_copy_to_buffer(data->sg, data->sg_len,
++ host->linear_buf, data->blksz * data->blocks);
++ WARN_ON(data->blksz * data->blocks != r);
++ }
++
++ dma_cfg.u64 = 0;
++ dma_cfg.s.en = 1;
++ dma_cfg.s.rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0;
++#ifdef __LITTLE_ENDIAN
++ dma_cfg.s.endian = 1;
++#endif
++ dma_cfg.s.size = ((data->blksz * data->blocks) / 8) - 1;
++ if (!host->big_dma_addr) {
++ if (data->sg_len > 1)
++ dma_cfg.s.adr = virt_to_phys(host->linear_buf);
++ else
++ dma_cfg.s.adr = sg_phys(data->sg);
++ }
++ cvmx_write_csr(host->ndf_base + OCT_MIO_NDF_DMA_CFG, dma_cfg.u64);
++ octeon_mmc_dbg("MIO_NDF_DMA_CFG: %016llx\n",
++ (unsigned long long)dma_cfg.u64);
++ if (host->big_dma_addr) {
++ u64 addr;
++
++ if (data->sg_len > 1)
++ addr = virt_to_phys(host->linear_buf);
++ else
++ addr = sg_phys(data->sg);
++ cvmx_write_csr(host->ndf_base + OCT_MIO_EMM_DMA_ADR, addr);
++ octeon_mmc_dbg("MIO_EMM_DMA_ADR: %016llx\n",
++ (unsigned long long)addr);
++ }
++
++ emm_dma.u64 = 0;
++ emm_dma.s.bus_id = slot->bus_id;
++ emm_dma.s.dma_val = 1;
++ emm_dma.s.sector = mmc_card_blockaddr(mmc->card) ? 1 : 0;
++ emm_dma.s.rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0;
++ if (mmc_card_mmc(mmc->card) ||
++ (mmc_card_sd(mmc->card) &&
++ (mmc->card->scr.cmds & SD_SCR_CMD23_SUPPORT)))
++ emm_dma.s.multi = 1;
++ emm_dma.s.block_cnt = data->blocks;
++ emm_dma.s.card_addr = cmd->arg;
++
++ emm_int.u64 = 0;
++ emm_int.s.dma_done = 1;
++ emm_int.s.cmd_err = 1;
++ emm_int.s.dma_err = 1;
++ /* Clear the bit. */
++ cvmx_write_csr(host->base + OCT_MIO_EMM_INT, emm_int.u64);
++ cvmx_write_csr(host->base + OCT_MIO_EMM_INT_EN, emm_int.u64);
++ host->dma_active = true;
++
++ if ((OCTEON_IS_MODEL(OCTEON_CN6XXX) ||
++ OCTEON_IS_MODEL(OCTEON_CNF7XXX)) &&
++ cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK &&
++ (data->blksz * data->blocks) > 1024) {
++ host->n_minus_one = dma_cfg.s.adr +
++ (data->blksz * data->blocks) - 1024;
++ l2c_lock_mem_region(host->n_minus_one, 512);
++ }
++
++ if (mmc->card && mmc_card_sd(mmc->card))
++ cvmx_write_csr(host->base + OCT_MIO_EMM_STS_MASK,
++ 0x00b00000ull);
++ else
++ cvmx_write_csr(host->base + OCT_MIO_EMM_STS_MASK,
++ 0xe4f90080ull);
++ cvmx_write_csr(host->base + OCT_MIO_EMM_DMA, emm_dma.u64);
++ octeon_mmc_dbg("MIO_EMM_DMA: %llx\n", emm_dma.u64);
++}
++
++static void octeon_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
++{
++ struct octeon_mmc_slot *slot;
++ struct octeon_mmc_host *host;
++ struct mmc_command *cmd;
++ union cvmx_mio_emm_int emm_int;
++ union cvmx_mio_emm_cmd emm_cmd;
++ struct octeon_mmc_cr_mods mods;
++
++ cmd = mrq->cmd;
++
++ if (cmd->opcode == MMC_READ_MULTIPLE_BLOCK ||
++ cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK) {
++ octeon_mmc_dma_request(mmc, mrq);
++ return;
++ }
++
++ mods = octeon_mmc_get_cr_mods(cmd);
++
++ slot = mmc_priv(mmc);
++ host = slot->host;
++
++ /* Only a single user of the bootbus at a time. */
++ octeon_mmc_acquire_bus(host);
++
++ octeon_mmc_switch_to(slot);
++
++ WARN_ON(host->current_req);
++ host->current_req = mrq;
++
++ emm_int.u64 = 0;
++ emm_int.s.cmd_done = 1;
++ emm_int.s.cmd_err = 1;
++ if (cmd->data) {
++ octeon_mmc_dbg("command has data\n");
++ if (cmd->data->flags & MMC_DATA_READ) {
++ sg_miter_start(&host->smi, mrq->data->sg,
++ mrq->data->sg_len,
++ SG_MITER_ATOMIC | SG_MITER_TO_SG);
++ } else {
++ struct sg_mapping_iter *smi = &host->smi;
++ unsigned int data_len =
++ mrq->data->blksz * mrq->data->blocks;
++ unsigned int bytes_xfered;
++ u64 dat = 0;
++ int shift = 56;
++ /*
++ * Copy data to the xmit buffer before
++ * issuing the command
++ */
++ sg_miter_start(smi, mrq->data->sg,
++ mrq->data->sg_len, SG_MITER_FROM_SG);
++ /* Auto inc from offset zero, dbuf zero */
++ cvmx_write_csr(host->base + OCT_MIO_EMM_BUF_IDX,
++ 0x10000ull);
++
++ for (bytes_xfered = 0; bytes_xfered < data_len;) {
++ if (smi->consumed >= smi->length) {
++ if (!sg_miter_next(smi))
++ break;
++ smi->consumed = 0;
++ }
++
++ while (smi->consumed < smi->length &&
++ shift >= 0) {
++
++ dat |= (u64)(((u8 *)(smi->addr))
++ [smi->consumed]) << shift;
++ bytes_xfered++;
++ smi->consumed++;
++ shift -= 8;
++ }
++ if (shift < 0) {
++ cvmx_write_csr(host->base +
++ OCT_MIO_EMM_BUF_DAT, dat);
++ shift = 56;
++ dat = 0;
++ }
++ }
++ sg_miter_stop(smi);
++ }
++ if (cmd->data->timeout_ns) {
++ cvmx_write_csr(host->base + OCT_MIO_EMM_WDOG,
++ octeon_mmc_timeout_to_wdog(slot,
++ cmd->data->timeout_ns));
++ octeon_mmc_dbg("OCT_MIO_EMM_WDOG %llu\n",
++ cvmx_read_csr(host->base +
++ OCT_MIO_EMM_WDOG));
++ }
++ } else {
++ cvmx_write_csr(host->base + OCT_MIO_EMM_WDOG,
++ ((u64)slot->clock * 850ull) / 1000ull);
++ octeon_mmc_dbg("OCT_MIO_EMM_WDOG %llu\n",
++ cvmx_read_csr(host->base + OCT_MIO_EMM_WDOG));
++ }
++ /* Clear the bit. */
++ cvmx_write_csr(host->base + OCT_MIO_EMM_INT, emm_int.u64);
++ cvmx_write_csr(host->base + OCT_MIO_EMM_INT_EN, emm_int.u64);
++ host->dma_active = false;
++
++ emm_cmd.u64 = 0;
++ emm_cmd.s.cmd_val = 1;
++ emm_cmd.s.ctype_xor = mods.ctype_xor;
++ emm_cmd.s.rtype_xor = mods.rtype_xor;
++ if (mmc_cmd_type(cmd) == MMC_CMD_ADTC)
++ emm_cmd.s.offset = 64 -
++ ((cmd->data->blksz * cmd->data->blocks) / 8);
++ emm_cmd.s.bus_id = slot->bus_id;
++ emm_cmd.s.cmd_idx = cmd->opcode;
++ emm_cmd.s.arg = cmd->arg;
++ cvmx_write_csr(host->base + OCT_MIO_EMM_STS_MASK, 0);
++ cvmx_write_csr(host->base + OCT_MIO_EMM_CMD, emm_cmd.u64);
++ octeon_mmc_dbg("MIO_EMM_CMD: %llx\n", emm_cmd.u64);
++}
++
++static void octeon_mmc_reset_bus(struct octeon_mmc_slot *slot, int preserve)
++{
++ union cvmx_mio_emm_cfg emm_cfg;
++ union cvmx_mio_emm_switch emm_switch;
++ u64 wdog = 0;
++
++ emm_cfg.u64 = cvmx_read_csr(slot->host->base + OCT_MIO_EMM_CFG);
++ if (preserve) {
++ emm_switch.u64 = cvmx_read_csr(slot->host->base +
++ OCT_MIO_EMM_SWITCH);
++ wdog = cvmx_read_csr(slot->host->base + OCT_MIO_EMM_WDOG);
++ }
++
++ /* Restore switch settings */
++ if (preserve) {
++ emm_switch.s.switch_exe = 0;
++ emm_switch.s.switch_err0 = 0;
++ emm_switch.s.switch_err1 = 0;
++ emm_switch.s.switch_err2 = 0;
++ emm_switch.s.bus_id = 0;
++ cvmx_write_csr(slot->host->base + OCT_MIO_EMM_SWITCH,
++ emm_switch.u64);
++ emm_switch.s.bus_id = slot->bus_id;
++ cvmx_write_csr(slot->host->base + OCT_MIO_EMM_SWITCH,
++ emm_switch.u64);
++
++ slot->cached_switch = emm_switch.u64;
++
++ msleep(10);
++ cvmx_write_csr(slot->host->base + OCT_MIO_EMM_WDOG, wdog);
++ } else {
++ slot->cached_switch = 0;
++ }
++}
++
++static void octeon_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
++{
++ struct octeon_mmc_slot *slot;
++ struct octeon_mmc_host *host;
++ int bus_width;
++ int clock;
++ bool ddr_clock;
++ int hs_timing;
++ int power_class = 10;
++ int clk_period;
++ int timeout = 2000;
++ union cvmx_mio_emm_switch emm_switch;
++ union cvmx_mio_emm_rsp_sts emm_sts;
++
++ slot = mmc_priv(mmc);
++ host = slot->host;
++
++ /* Only a single user of the bootbus at a time. */
++ octeon_mmc_acquire_bus(host);
++
++ octeon_mmc_switch_to(slot);
++
++ octeon_mmc_dbg("Calling set_ios: slot: clk = 0x%x, bus_width = %d\n",
++ slot->clock, slot->bus_width);
++ octeon_mmc_dbg("Calling set_ios: ios: clk = 0x%x, vdd = %u, bus_width = %u, power_mode = %u, timing = %u\n",
++ ios->clock, ios->vdd, ios->bus_width, ios->power_mode,
++ ios->timing);
++ octeon_mmc_dbg("Calling set_ios: mmc: caps = 0x%x, bus_width = %d\n",
++ mmc->caps, mmc->ios.bus_width);
++
++ /*
++ * Reset the chip on each power off
++ */
++ if (ios->power_mode == MMC_POWER_OFF) {
++ octeon_mmc_reset_bus(slot, 1);
++ if (slot->pwr_gpio >= 0)
++ gpio_set_value_cansleep(slot->pwr_gpio,
++ slot->pwr_gpio_low);
++ } else {
++ if (slot->pwr_gpio >= 0)
++ gpio_set_value_cansleep(slot->pwr_gpio,
++ !slot->pwr_gpio_low);
++ }
++
++ switch (ios->bus_width) {
++ case MMC_BUS_WIDTH_8:
++ bus_width = 2;
++ break;
++ case MMC_BUS_WIDTH_4:
++ bus_width = 1;
++ break;
++ case MMC_BUS_WIDTH_1:
++ bus_width = 0;
++ break;
++ default:
++ octeon_mmc_dbg("unknown bus width %d\n", ios->bus_width);
++ bus_width = 0;
++ break;
++ }
++
++ hs_timing = (ios->timing == MMC_TIMING_MMC_HS);
++ ddr_clock = (bus_width && ios->timing >= MMC_TIMING_UHS_DDR50);
++
++ if (ddr_clock)
++ bus_width |= 4;
++
++ if (ios->clock) {
++ slot->clock = ios->clock;
++ slot->bus_width = bus_width;
++
++ clock = slot->clock;
++
++ if (clock > 52000000)
++ clock = 52000000;
++
++ clk_period = (octeon_get_io_clock_rate() + clock - 1) /
++ (2 * clock);
++
++ /* until clock-renengotiate-on-CRC is in */
++ if (ddr_clock && ddr > 1)
++ clk_period *= 2;
++
++ emm_switch.u64 = 0;
++ emm_switch.s.hs_timing = hs_timing;
++ emm_switch.s.bus_width = bus_width;
++ emm_switch.s.power_class = power_class;
++ emm_switch.s.clk_hi = clk_period;
++ emm_switch.s.clk_lo = clk_period;
++
++ if (!octeon_mmc_switch_val_changed(slot, emm_switch.u64)) {
++ octeon_mmc_dbg("No change from 0x%llx mio_emm_switch, returning.\n",
++ emm_switch.u64);
++ goto out;
++ }
++
++ octeon_mmc_dbg("Writing 0x%llx to mio_emm_wdog\n",
++ ((u64)clock * 850ull) / 1000ull);
++ cvmx_write_csr(host->base + OCT_MIO_EMM_WDOG,
++ ((u64)clock * 850ull) / 1000ull);
++ octeon_mmc_dbg("Writing 0x%llx to mio_emm_switch\n",
++ emm_switch.u64);
++
++ cvmx_write_csr(host->base + OCT_MIO_EMM_SWITCH, emm_switch.u64);
++ emm_switch.s.bus_id = slot->bus_id;
++ cvmx_write_csr(host->base + OCT_MIO_EMM_SWITCH, emm_switch.u64);
++ slot->cached_switch = emm_switch.u64;
++
++ do {
++ emm_sts.u64 =
++ cvmx_read_csr(host->base + OCT_MIO_EMM_RSP_STS);
++ if (!emm_sts.s.switch_val)
++ break;
++ udelay(100);
++ } while (timeout-- > 0);
++
++ if (timeout <= 0) {
++ octeon_mmc_dbg("switch command timed out, status=0x%llx\n",
++ emm_sts.u64);
++ goto out;
++ }
++ }
++out:
++ octeon_mmc_release_bus(host);
++}
++
++static int octeon_mmc_get_ro(struct mmc_host *mmc)
++{
++ struct octeon_mmc_slot *slot = mmc_priv(mmc);
++
++ if (slot->ro_gpio >= 0) {
++ int pin = gpio_get_value_cansleep(slot->ro_gpio);
++
++ if (pin < 0)
++ return pin;
++ if (slot->ro_gpio_low)
++ pin = !pin;
++ return pin;
++ } else {
++ return -ENOSYS;
++ }
++}
++
++static int octeon_mmc_get_cd(struct mmc_host *mmc)
++{
++ struct octeon_mmc_slot *slot = mmc_priv(mmc);
++
++ if (slot->cd_gpio >= 0) {
++ int pin = gpio_get_value_cansleep(slot->cd_gpio);
++
++ if (pin < 0)
++ return pin;
++ if (slot->cd_gpio_low)
++ pin = !pin;
++ return pin;
++ } else {
++ return -ENOSYS;
++ }
++}
++
++static const struct mmc_host_ops octeon_mmc_ops = {
++ .request = octeon_mmc_request,
++ .set_ios = octeon_mmc_set_ios,
++ .get_ro = octeon_mmc_get_ro,
++ .get_cd = octeon_mmc_get_cd,
++};
++
++static void octeon_mmc_set_clock(struct octeon_mmc_slot *slot,
++ unsigned int clock)
++{
++ struct mmc_host *mmc = slot->mmc;
++
++ clock = min(clock, mmc->f_max);
++ clock = max(clock, mmc->f_min);
++ slot->clock = clock;
++}
++
++static int octeon_mmc_initlowlevel(struct octeon_mmc_slot *slot,
++ int bus_width)
++{
++ union cvmx_mio_emm_switch emm_switch;
++ struct octeon_mmc_host *host = slot->host;
++
++ host->emm_cfg |= 1ull << slot->bus_id;
++ cvmx_write_csr(slot->host->base + OCT_MIO_EMM_CFG, host->emm_cfg);
++ octeon_mmc_set_clock(slot, 400000);
++
++ /* Program initial clock speed and power */
++ emm_switch.u64 = 0;
++ emm_switch.s.power_class = 10;
++ emm_switch.s.clk_hi = (slot->sclock / slot->clock) / 2;
++ emm_switch.s.clk_lo = (slot->sclock / slot->clock) / 2;
++
++ cvmx_write_csr(host->base + OCT_MIO_EMM_SWITCH, emm_switch.u64);
++ emm_switch.s.bus_id = slot->bus_id;
++ cvmx_write_csr(host->base + OCT_MIO_EMM_SWITCH, emm_switch.u64);
++ slot->cached_switch = emm_switch.u64;
++
++ cvmx_write_csr(host->base + OCT_MIO_EMM_WDOG,
++ ((u64)slot->clock * 850ull) / 1000ull);
++ cvmx_write_csr(host->base + OCT_MIO_EMM_STS_MASK, 0xe4f90080ull);
++ cvmx_write_csr(host->base + OCT_MIO_EMM_RCA, 1);
++ return 0;
++}
++
++static int __init octeon_init_slot(struct octeon_mmc_host *host, int id,
++ int bus_width, int max_freq,
++ int ro_gpio, int cd_gpio, int pwr_gpio,
++ bool ro_low, bool cd_low, bool power_low,
++ u32 cmd_skew, u32 dat_skew)
++{
++ struct mmc_host *mmc;
++ struct octeon_mmc_slot *slot;
++ u64 clock_period;
++ int ret;
++
++ /*
++ * Allocate MMC structue
++ */
++ mmc = mmc_alloc_host(sizeof(struct octeon_mmc_slot), &host->pdev->dev);
++ if (!mmc) {
++ dev_err(&host->pdev->dev, "alloc host failed\n");
++ return -ENOMEM;
++ }
++
++ slot = mmc_priv(mmc);
++ slot->mmc = mmc;
++ slot->host = host;
++ slot->ro_gpio = ro_gpio;
++ slot->cd_gpio = cd_gpio;
++ slot->pwr_gpio = pwr_gpio;
++ slot->ro_gpio_low = ro_low;
++ slot->cd_gpio_low = cd_low;
++ slot->pwr_gpio_low = power_low;
++
++ if (slot->ro_gpio >= 0) {
++ ret = gpio_request(slot->ro_gpio, "mmc_ro");
++ if (ret) {
++ dev_err(&host->pdev->dev,
++ "Could not request mmc_ro GPIO %d\n",
++ slot->ro_gpio);
++ return ret;
++ }
++ gpio_direction_input(slot->ro_gpio);
++ }
++ if (slot->cd_gpio >= 0) {
++ ret = gpio_request(slot->cd_gpio, "mmc_card_detect");
++ if (ret) {
++ if (slot->ro_gpio >= 0)
++ gpio_free(slot->ro_gpio);
++ dev_err(&host->pdev->dev, "Could not request mmc_card_detect GPIO %d\n",
++ slot->cd_gpio);
++ return ret;
++ }
++ gpio_direction_input(slot->cd_gpio);
++ }
++ if (slot->pwr_gpio >= 0) {
++ ret = gpio_request(slot->pwr_gpio, "mmc_power");
++ if (ret) {
++ dev_err(&host->pdev->dev,
++ "Could not request mmc_power GPIO %d\n",
++ slot->pwr_gpio);
++ if (slot->ro_gpio >= 0)
++ gpio_free(slot->ro_gpio);
++ if (slot->cd_gpio)
++ gpio_free(slot->cd_gpio);
++ return ret;
++ }
++ octeon_mmc_dbg("%s: Shutting off power to slot %d via gpio %d\n",
++ DRV_NAME, slot->bus_id, slot->pwr_gpio);
++ gpio_direction_output(slot->pwr_gpio,
++ slot->pwr_gpio_low);
++ }
++ /*
++ * Set up host parameters.
++ */
++ mmc->ops = &octeon_mmc_ops;
++ mmc->f_min = 400000;
++ mmc->f_max = max_freq;
++ mmc->caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
++ MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
++ MMC_CAP_ERASE;
++ mmc->ocr_avail = MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 |
++ MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 |
++ MMC_VDD_33_34 | MMC_VDD_34_35 | MMC_VDD_35_36;
++
++ /* post-sdk23 caps */
++ mmc->caps |=
++ ((mmc->f_max >= 12000000) * MMC_CAP_UHS_SDR12) |
++ ((mmc->f_max >= 25000000) * MMC_CAP_UHS_SDR25) |
++ ((mmc->f_max >= 50000000) * MMC_CAP_UHS_SDR50) |
++ MMC_CAP_CMD23;
++
++ if (host->global_pwr_gpio >= 0)
++ mmc->caps |= MMC_CAP_POWER_OFF_CARD;
++
++ /* "1.8v" capability is actually 1.8-or-3.3v */
++ if (ddr)
++ mmc->caps |= MMC_CAP_UHS_DDR50 | MMC_CAP_1_8V_DDR;
++
++ mmc->max_segs = 64;
++ mmc->max_seg_size = host->linear_buf_size;
++ mmc->max_req_size = host->linear_buf_size;
++ mmc->max_blk_size = 512;
++ mmc->max_blk_count = mmc->max_req_size / 512;
++
++ slot->clock = mmc->f_min;
++ slot->sclock = octeon_get_io_clock_rate();
++
++ clock_period = 1000000000000ull / slot->sclock; /* period in pS */
++ slot->cmd_cnt = (cmd_skew + clock_period / 2) / clock_period;
++ slot->dat_cnt = (dat_skew + clock_period / 2) / clock_period;
++
++ slot->bus_width = bus_width;
++ slot->bus_id = id;
++ slot->cached_rca = 1;
++
++ /* Only a single user of the bootbus at a time. */
++ octeon_mmc_acquire_bus(host);
++ host->slot[id] = slot;
++
++ octeon_mmc_switch_to(slot);
++ /* Initialize MMC Block. */
++ octeon_mmc_initlowlevel(slot, bus_width);
++
++ octeon_mmc_release_bus(host);
++
++ ret = mmc_add_host(mmc);
++ octeon_mmc_dbg("mmc_add_host returned %d\n", ret);
++
++ return 0;
++}
++
++static int octeon_mmc_probe(struct platform_device *pdev)
++{
++ union cvmx_mio_emm_cfg emm_cfg;
++ struct octeon_mmc_host *host;
++ struct resource *res;
++ void __iomem *base;
++ int mmc_irq[9];
++ int i;
++ int ret = 0;
++ struct device_node *node = pdev->dev.of_node;
++ bool cn78xx_style;
++ u64 t;
++ enum of_gpio_flags f;
++
++ host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL);
++ if (!host)
++ return -ENOMEM;
++
++ spin_lock_init(&host->irq_handler_lock);
++ sema_init(&host->mmc_serializer, 1);
++
++ cn78xx_style = of_device_is_compatible(node, "cavium,octeon-7890-mmc");
++ if (cn78xx_style) {
++ host->need_bootbus_lock = false;
++ host->big_dma_addr = true;
++ host->need_irq_handler_lock = true;
++ /*
++ * First seven are the EMM_INT bits 0..6, then two for
++ * the EMM_DMA_INT bits
++ */
++ for (i = 0; i < 9; i++) {
++ mmc_irq[i] = platform_get_irq(pdev, i);
++ if (mmc_irq[i] < 0)
++ return mmc_irq[i];
++ }
++ } else {
++ host->need_bootbus_lock = true;
++ host->big_dma_addr = false;
++ host->need_irq_handler_lock = false;
++ /* First one is EMM second NDF_DMA */
++ for (i = 0; i < 2; i++) {
++ mmc_irq[i] = platform_get_irq(pdev, i);
++ if (mmc_irq[i] < 0)
++ return mmc_irq[i];
++ }
++ }
++ host->last_slot = -1;
++
++ if (bb_size < 512 || bb_size >= (1 << 24))
++ bb_size = 1 << 16;
++ host->linear_buf_size = bb_size;
++ host->linear_buf = devm_kzalloc(&pdev->dev, host->linear_buf_size,
++ GFP_KERNEL);
++
++ if (!host->linear_buf) {
++ dev_err(&pdev->dev, "devm_kzalloc failed\n");
++ return -ENOMEM;
++ }
++
++ host->pdev = pdev;
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!res) {
++ dev_err(&pdev->dev, "Platform resource[0] is missing\n");
++ return -ENXIO;
++ }
++ base = devm_ioremap_resource(&pdev->dev, res);
++ if (IS_ERR(base))
++ return PTR_ERR(base);
++ host->base = (u64)base;
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++ if (!res) {
++ dev_err(&pdev->dev, "Platform resource[1] is missing\n");
++ ret = -EINVAL;
++ goto err;
++ }
++ base = devm_ioremap_resource(&pdev->dev, res);
++ if (IS_ERR(base)) {
++ ret = PTR_ERR(base);
++ goto err;
++ }
++ host->ndf_base = (u64)base;
++ /*
++ * Clear out any pending interrupts that may be left over from
++ * bootloader.
++ */
++ t = cvmx_read_csr(host->base + OCT_MIO_EMM_INT);
++ cvmx_write_csr(host->base + OCT_MIO_EMM_INT, t);
++ if (cn78xx_style) {
++ /* Only CMD_DONE, DMA_DONE, CMD_ERR, DMA_ERR */
++ for (i = 1; i <= 4; i++) {
++ ret = devm_request_irq(&pdev->dev, mmc_irq[i],
++ octeon_mmc_interrupt,
++ 0, DRV_NAME, host);
++ if (ret < 0) {
++ dev_err(&pdev->dev, "Error: devm_request_irq %d\n",
++ mmc_irq[i]);
++ goto err;
++ }
++ }
++ } else {
++ ret = devm_request_irq(&pdev->dev, mmc_irq[0],
++ octeon_mmc_interrupt, 0, DRV_NAME, host);
++ if (ret < 0) {
++ dev_err(&pdev->dev, "Error: devm_request_irq %d\n",
++ mmc_irq[0]);
++ goto err;
++ }
++ }
++
++ ret = of_get_named_gpio_flags(node, "power-gpios", 0, &f);
++ if (ret == -EPROBE_DEFER)
++ goto err;
++
++ host->global_pwr_gpio = ret;
++ host->global_pwr_gpio_low =
++ (host->global_pwr_gpio >= 0 && f == OF_GPIO_ACTIVE_LOW);
++
++ if (host->global_pwr_gpio >= 0) {
++ ret = gpio_request(host->global_pwr_gpio, "mmc global power");
++ if (ret) {
++ dev_err(&pdev->dev,
++ "Could not request mmc global power gpio %d\n",
++ host->global_pwr_gpio);
++ goto err;
++ }
++ dev_dbg(&pdev->dev, "Global power on\n");
++ gpio_direction_output(host->global_pwr_gpio,
++ !host->global_pwr_gpio_low);
++ }
++
++ platform_set_drvdata(pdev, host);
++
++ for_each_child_of_node(pdev->dev.of_node, node) {
++
++ int r;
++ u32 slot;
++ int ro_gpio, cd_gpio, pwr_gpio;
++ bool ro_low, cd_low, pwr_low;
++ u32 bus_width, max_freq, cmd_skew, dat_skew;
++
++ if (!of_device_is_compatible(node,
++ "cavium,octeon-6130-mmc-slot")) {
++ pr_warn("Sub node isn't slot: %s\n",
++ of_node_full_name(node));
++ continue;
++ }
++
++ if (of_property_read_u32(node, "reg", &slot) != 0) {
++ pr_warn("Missing or invalid reg property on %s\n",
++ of_node_full_name(node));
++ continue;
++ }
++
++ r = of_property_read_u32(node, "cavium,bus-max-width",
++ &bus_width);
++ if (r) {
++ bus_width = 8;
++ pr_info("Bus width not found for slot %d, defaulting to %d\n",
++ slot, bus_width);
++ } else {
++ switch (bus_width) {
++ case 1:
++ case 4:
++ case 8:
++ break;
++ default:
++ pr_warn("Invalid bus width property for slot %d\n",
++ slot);
++ continue;
++ }
++ }
++
++ r = of_property_read_u32(node, "cavium,cmd-clk-skew",
++ &cmd_skew);
++ if (r)
++ cmd_skew = 0;
++
++ r = of_property_read_u32(node, "cavium,dat-clk-skew",
++ &dat_skew);
++ if (r)
++ dat_skew = 0;
++
++ r = of_property_read_u32(node, "spi-max-frequency", &max_freq);
++ if (r) {
++ max_freq = 52000000;
++ pr_info("No spi-max-frequency for slot %d, defaulting to %d\n",
++ slot, max_freq);
++ }
++
++ ro_gpio = of_get_named_gpio_flags(node, "wp-gpios", 0, &f);
++ ro_low = (ro_gpio >= 0 && f == OF_GPIO_ACTIVE_LOW);
++ cd_gpio = of_get_named_gpio_flags(node, "cd-gpios", 0, &f);
++ cd_low = (cd_gpio >= 0 && f == OF_GPIO_ACTIVE_LOW);
++ pwr_gpio = of_get_named_gpio_flags(node, "power-gpios", 0, &f);
++ pwr_low = (pwr_gpio >= 0 && f == OF_GPIO_ACTIVE_LOW);
++
++ ret = octeon_init_slot(host, slot, bus_width, max_freq,
++ ro_gpio, cd_gpio, pwr_gpio,
++ ro_low, cd_low, pwr_low,
++ cmd_skew, dat_skew);
++ octeon_mmc_dbg("init slot %d, ret = %d\n", slot, ret);
++ if (ret)
++ goto err;
++ }
++
++ return ret;
++
++err:
++ dev_err(&pdev->dev, "Probe failed: %d\n", ret);
++
++ /* Disable MMC controller */
++ emm_cfg.s.bus_ena = 0;
++ cvmx_write_csr(host->base + OCT_MIO_EMM_CFG, emm_cfg.u64);
++
++ if (host->global_pwr_gpio >= 0) {
++ dev_dbg(&pdev->dev, "Global power off\n");
++ gpio_set_value_cansleep(host->global_pwr_gpio,
++ host->global_pwr_gpio_low);
++ gpio_free(host->global_pwr_gpio);
++ }
++
++ return ret;
++}
++
++static int octeon_mmc_remove(struct platform_device *pdev)
++{
++ union cvmx_mio_ndf_dma_cfg ndf_dma_cfg;
++ struct octeon_mmc_host *host = platform_get_drvdata(pdev);
++ struct octeon_mmc_slot *slot;
++
++ platform_set_drvdata(pdev, NULL);
++
++ if (host) {
++ int i;
++
++ /* quench all users */
++ for (i = 0; i < OCTEON_MAX_MMC; i++) {
++ slot = host->slot[i];
++ if (slot)
++ mmc_remove_host(slot->mmc);
++ }
++
++ /* Reset bus_id */
++ ndf_dma_cfg.u64 =
++ cvmx_read_csr(host->ndf_base + OCT_MIO_NDF_DMA_CFG);
++ ndf_dma_cfg.s.en = 0;
++ cvmx_write_csr(host->ndf_base + OCT_MIO_NDF_DMA_CFG,
++ ndf_dma_cfg.u64);
++
++ for (i = 0; i < OCTEON_MAX_MMC; i++) {
++ struct octeon_mmc_slot *slot;
++
++ slot = host->slot[i];
++ if (!slot)
++ continue;
++ /* Free the GPIOs */
++ if (slot->ro_gpio >= 0)
++ gpio_free(slot->ro_gpio);
++ if (slot->cd_gpio >= 0)
++ gpio_free(slot->cd_gpio);
++ if (slot->pwr_gpio >= 0) {
++ gpio_set_value_cansleep(slot->pwr_gpio,
++ slot->pwr_gpio_low);
++ gpio_free(slot->pwr_gpio);
++ }
++ }
++
++ if (host->global_pwr_gpio >= 0) {
++ dev_dbg(&pdev->dev, "Global power off\n");
++ gpio_set_value_cansleep(host->global_pwr_gpio,
++ host->global_pwr_gpio_low);
++ gpio_free(host->global_pwr_gpio);
++ }
++
++ for (i = 0; i < OCTEON_MAX_MMC; i++) {
++ slot = host->slot[i];
++ if (slot)
++ mmc_free_host(slot->mmc);
++ }
++
++ }
++ return 0;
++}
++
++static struct of_device_id octeon_mmc_match[] = {
++ {
++ .compatible = "cavium,octeon-6130-mmc",
++ },
++ {
++ .compatible = "cavium,octeon-7890-mmc",
++ },
++ {},
++};
++MODULE_DEVICE_TABLE(of, octeon_mmc_match);
++
++static struct platform_driver octeon_mmc_driver = {
++ .probe = octeon_mmc_probe,
++ .remove = octeon_mmc_remove,
++ .driver = {
++ .name = DRV_NAME,
++ .owner = THIS_MODULE,
++ .of_match_table = octeon_mmc_match,
++ },
++};
++
++static int __init octeon_mmc_init(void)
++{
++ int ret;
++
++ octeon_mmc_dbg("calling octeon_mmc_init\n");
++
++ ret = platform_driver_register(&octeon_mmc_driver);
++ octeon_mmc_dbg("driver probe returned %d\n", ret);
++
++ if (ret)
++ pr_err("%s: Failed to register driver\n", DRV_NAME);
++
++ return ret;
++}
++
++static void __exit octeon_mmc_cleanup(void)
++{
++ /* Unregister MMC driver */
++ platform_driver_unregister(&octeon_mmc_driver);
++}
++
++module_init(octeon_mmc_init);
++module_exit(octeon_mmc_cleanup);
++
++MODULE_AUTHOR("Cavium Inc. <supp...@cavium.com>");
++MODULE_DESCRIPTION("low-level driver for Cavium OCTEON MMC/SSD card");
++MODULE_LICENSE("GPL");
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
