Use `mktplinkfw sysupgrade` or `mktplinkfw factory` or
`mktplinkfw image`
Signed-off-by: Alexander Couzens <[email protected]>
---
target/linux/ar71xx/image/Makefile | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/target/linux/ar71xx/image/Makefile
b/target/linux/ar71xx/image/Makefile
index 204a6e7..4023b1a 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -45,6 +45,26 @@ define Build/netgear-image
mv [email protected] $@
endef
+# combine kernel and rootfs into one image
+# -a align the rootfs start on an <align> bytes boundary
+# -j add jffs2 end-of-filesystem markers
+# -s strip padding from end of the image
+# -X reserve <size> bytes in the firmware image (hexval prefixed with 0x)
+define Build/mktplinkfw
+ $(STAGING_DIR_HOST)/bin/mktplinkfw \
+ -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT)
-N OpenWrt -V $(REVISION) \
+ -k $(word 1,$^) \
+ -r $@ \
+ -o [email protected] \
+ -a $(call rootfs_align,$(FILESYSTEM)) \
+ $(if $(findstring sysupgrade,$1),-j -X 0x40000) \
+ $(if $(findstring factory,$1),-j -X 0x40000 -s) \
+ $(if $(findstring initramfs,$1),-s -c)
+ @mv [email protected] $@
+endef
+
+DEVICE_VARS += TPLINK_HWID TPLINK_HWREV TPLINK_FLASHLAYOUT
+
define Device/Default
BOARDNAME :=
DEVICE_PROFILE = $$(BOARDNAME)
--
2.3.3
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
