As the ram space is up to 256MB DDR3, thus there is sufficient memory to be
decompressed kernel.
------------------ Original ------------------
From: "Conor O'Gorman";<[email protected]>;
Date: Tue, Mar 10, 2015 05:49 PM
To: "openwrt-devel"<[email protected]>;
Subject: Re: [OpenWrt-Devel]reply?? System halted on bcm4708 series board when
booting openwrt trunk(kernel 3.14)
On 10/03/15 06:34, Tymon wrote:
> On 10 March 2015 at 04:43, Tymon <[email protected]> wrote:
> > my cpu is BCM958522ER which is the same series with 4708 as well, 32MB
>
> > ###boot log: (I updated the xxx-squashfs.trx to the flash)
> >
> > Hit any key to stop autoboot: 0
> > Checking TRX Image at addr 1e200000 ...
> > Uncompressing ... Primary TRX image OK
> > kernel args : console=ttyS0,115200 ubi.mtd=5 root=ubi0:rootfs ro
> > rootflags=sync rootfstype=ubifs user_debug=31
> > Booting from Primary Partition
> > kernel_args console=ttyS0,115200 ubi.mtd=5 root=ubi0:rootfs ro
> > rootflags=sync rootfstype=ubifs user_debug=31
> > Start addr 00008000 machid 127f Parmameter addr 00100000 ...
> >
> > Starting kernel ...
> > Uncompressing Linux...
> >
> > XZ-compressed data is corrupt
> >
> > -- System halted
> >
> > I want to know why this error arise, any hints will be appreciated.
>
> but the "XZ-compressed data is corrupt" is the message of openwrt-trunk
> kernel that under linux-3.14.xx/lib/compress_unxz.c +371
>
Did uboot load all of the image into memory?
Where did it load the image?
Where will the kernel decompress to?
Is there room for it to be decompressed?
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
