On Tuesday, June 30, 2015 05:35:12 PM Sven Eckelmann wrote: > r45954 ("ar71xx: fix 100/10mbps ethernet link issues on mynet range > extender") introduced a pdata based modification of the tx_clk_dly. But it > was not checked if pdata actually existed. This caused a page fault on all > devices which didn't have at803x_platform_data specified for an at803x > based device. > Ah finally. I tried to contact you several times before. (RFC back in May)
Sven, I've seen you did quite a bit of work on the OM5P-AN with the same F1E-PHY. I went through the code from Atheros' original driver SDK v17 (which was part of the GPL source for the mynet). Apart from tx delay handling, everything else matches perfectly, so the tx/rx delay code should be enabled by default for this chip on all platforms without needing any platform data overwrites. I'm interested to hear from any other devices which have a AT803x. Also, please let me know where to get the GPL tars for the devices. Regards, Chr _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel