> diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
> b/target/linux/ramips/base-files/etc/board.d/02_network
> index 334e889..a781f46 100755
[...]
> + re6500)
> + ucidef_set_interface_lan "eth0.1"
> + ucidef_add_switch "switch0" "1" "1"
> + ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 6t"
> + ;;
The four physical lan ports on the Linksys RE6500 are connected to switchport
0-3 so it must read:
+ ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 6t"
Personally I build my images with a WAN port on physical port 1 but since this
box has no dedicated WAN port labeled on
the backside it might be confusing use something like this as a default?
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -104,7 +104,13 @@ ramips_setup_interfaces()
ucidef_add_switch_vlan "switch0" "2" "0 9t"
;;
- re6500 | \
+ re6500)
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ ucidef_add_switch "switch0" "1" "1"
+ ucidef_add_switch_vlan "switch0" "1" "1 2 3 6t"
+ ucidef_add_switch_vlan "switch0" "2" "0 6t"
+ ;;
+
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
