Hi,
Daniel Golle wrote:
This package contains the WiFi NVRAM distributed with Bananian [1].
It's currently needed to use the WiFi module (BCM43362 SDIO) on the
BananaPro with the brcmfmac cfg80211 driver which doesn't yet support
retrieving calibration data via device-tree or platform_data.
(DOS-style newlines in nvram_ap6210.txt are supposedly intentional)
[1]: http://dl.bananian.org/releases/bananian-latest.zip
Signed-off-by: Daniel Golle <[email protected]>
---
package/firmware/ap6210-firmware/Makefile | 40 +++++++++++++++
.../ap6210-firmware/files/nvram_ap6210.txt | 57 ++++++++++++++++++++++
[snip]
--- /dev/null
+++ b/package/firmware/ap6210-firmware/files/nvram_ap6210.txt
@@ -0,0 +1,57 @@
+#AP6210_NVRAM_V1.2_03192013
+manfid=0x2d0
+prodid=0x492
+vendid=0x14e4
+devid=0x4343
+boardtype=0x0598
+
+# Board Revision is P307, same nvram file can be used for P304, P305, P306 and
P307 as the tssi pa params used are same
+#Please force the automatic RX PER data to the respective board directory if
not using P307 board, for e.g. for P305 boards force the data into the
following directory /projects/BCM43362/a1_labdata/boardtests/results/sdg_rev0305
+boardrev=0x1307
+boardnum=777
+xtalfreq=26000
+boardflags=0x80201
+boardflags2=0x80
+sromrev=3
+wl0id=0x431b
+macaddr=00:90:4c:07:71:12
[snip]
Hardcoding the MAC address doesn't seem ideal - cna you autogenerate
this file and at least make the MAC random? Generating it at build time
would be fine.
Regards,
-w-
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
