Signed-off-by: Daniel Dickinson <open...@daniel.thecshore.com>
---
 target/linux/ar71xx/config-4.1                     |   1 +
 .../816-MIPS-ath79-add-cr5000-support.patch        | 230 +++++++++++++++++++++
 2 files changed, 231 insertions(+)
 create mode 100644 
target/linux/ar71xx/patches-4.1/816-MIPS-ath79-add-cr5000-support.patch

diff --git a/target/linux/ar71xx/config-4.1 b/target/linux/ar71xx/config-4.1
index f42a65d..e78217b 100644
--- a/target/linux/ar71xx/config-4.1
+++ b/target/linux/ar71xx/config-4.1
@@ -52,6 +52,7 @@ CONFIG_ATH79_MACH_CAP4200AG=y
 CONFIG_ATH79_MACH_CARAMBOLA2=y
 CONFIG_ATH79_MACH_CPE510=y
 CONFIG_ATH79_MACH_CR3000=y
+CONFIG_ATH79_MACH_CR5000=y
 CONFIG_ATH79_MACH_DB120=y
 CONFIG_ATH79_MACH_DGL_5500_A1=y
 CONFIG_ATH79_MACH_DHP_1565_A1=y
diff --git 
a/target/linux/ar71xx/patches-4.1/816-MIPS-ath79-add-cr5000-support.patch 
b/target/linux/ar71xx/patches-4.1/816-MIPS-ath79-add-cr5000-support.patch
new file mode 100644
index 0000000..f0fc00b
--- /dev/null
+++ b/target/linux/ar71xx/patches-4.1/816-MIPS-ath79-add-cr5000-support.patch
@@ -0,0 +1,230 @@
+Index: linux-4.1.3/arch/mips/ath79/Kconfig
+===================================================================
+--- linux-4.1.3.orig/arch/mips/ath79/Kconfig
++++ linux-4.1.3/arch/mips/ath79/Kconfig
+@@ -916,6 +916,17 @@ config ATH79_MACH_CR3000
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_WMAC
+ 
++config ATH79_MACH_CR3000
++      bool "PowerCloud Systems CR5000 support"
++      select SOC_AR934X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++
+ config ATH79_MACH_EAP7660D
+       bool "Senao EAP7660D support"
+       select SOC_AR71XX
+Index: linux-4.1.3/arch/mips/ath79/Makefile
+===================================================================
+--- linux-4.1.3.orig/arch/mips/ath79/Makefile
++++ linux-4.1.3/arch/mips/ath79/Makefile
+@@ -60,6 +60,7 @@ obj-$(CONFIG_ATH79_MACH_CAP324)              += mach
+ obj-$(CONFIG_ATH79_MACH_CAP4200AG)    += mach-cap4200ag.o
+ obj-$(CONFIG_ATH79_MACH_CPE510)               += mach-cpe510.o
+ obj-$(CONFIG_ATH79_MACH_CR3000)               += mach-cr3000.o
++obj-$(CONFIG_ATH79_MACH_CR5000)               += mach-cr5000.o
+ obj-$(CONFIG_ATH79_MACH_DB120)                += mach-db120.o
+ obj-$(CONFIG_ATH79_MACH_DLAN_PRO_500_WP)      += mach-dlan-pro-500-wp.o
+ obj-$(CONFIG_ATH79_MACH_DLAN_PRO_1200_AC)     += mach-dlan-pro-1200-ac.o
+Index: linux-4.1.3/arch/mips/ath79/mach-cr5000.c
+===================================================================
+--- /dev/null
++++ linux-4.1.3/arch/mips/ath79/mach-cr5000.c
+@@ -0,0 +1,179 @@
++/*
++ * PowerCloud CR5000 support
++ *
++ * Copyright (c) 2011 Qualcomm Atheros
++ * Copyright (c) 2011-2012 Gabor Juhos <juh...@openwrt.org>
++ * Copyright (c) 2012-2013 PowerCloud Systems
++ * Copyright (c) 2015 Daniel Dickinson <open...@daniel.thecshore.com>
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ *
++ */
++
++#include <linux/gpio.h>
++#include <linux/pci.h>
++#include <linux/phy.h>
++#include <linux/platform_device.h>
++#include <linux/ath9k_platform.h>
++#include <linux/ar8216_platform.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/ath79.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-spi.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define CR5000_GPIO_LED_WLAN_2G               14
++#define CR5000_GPIO_LED_WPS           12
++#define CR5000_GPIO_LED_POWER_AMBER      4
++/* GPIO2 has to have JTAG disabled as it is also to
++ * power led
++ */
++#define CR5000_GPIO_LED_POWER_ENABLE     2
++#define CR5000_GPIO_BTN_WPS           16
++#define CR5000_GPIO_BTN_WPS           17
++
++#define CR5000_KEYS_POLL_INTERVAL     20      /* msecs */
++#define CR5000_KEYS_DEBOUNCE_INTERVAL (3 * CR5000_KEYS_POLL_INTERVAL)
++
++#define CR5000_MAC0_OFFSET            0
++#define CR5000_MAC1_OFFSET            6
++#define CR5000_WMAC_CALDATA_OFFSET    0x1000
++#define CR5000_WMAC_MAC_OFFSET                0x1002
++#define CR5000_PCIE_CALDATA_OFFSET    0x5000
++#define CR5000_PCIE_MAC_OFFSET                0x5002
++
++static struct gpio_led cr5000_leds_gpio[] __initdata = {
++      {
++              .name           = "pcs:amber:power",
++              .gpio           = CR5000_GPIO_LED_POWER_AMBER,
++              .active_low     = 1,
++      },
++      {
++              .name           = "pcs:white:wps",
++              .gpio           = CR5000_GPIO_LED_WPS,
++              .active_low     = 1,
++      },
++      {
++              .name           = "pcs:blue:wlan",
++              .gpio           = CR5000_GPIO_LED_WLAN_2G,
++              .active_low     = 1,
++      },
++};
++
++static struct gpio_keys_button cr5000_gpio_keys[] __initdata = {
++      {
++              .desc           = "WPS button",
++              .type           = EV_KEY,
++              .code           = KEY_WPS_BUTTON,
++              .debounce_interval = CR5000_KEYS_DEBOUNCE_INTERVAL,
++              .gpio           = CR5000_GPIO_BTN_WPS,
++              .active_low     = 1,
++      },
++      {
++              .desc           = "Reset button",
++              .type           = EV_KEY,
++              .code           = KEY_WPS_BUTTON,
++              .debounce_interval = CR5000_KEYS_DEBOUNCE_INTERVAL,
++              .gpio           = CR5000_GPIO_BTN_RESET,
++              .active_low     = 1,
++      },
++};
++
++static struct ar8327_pad_cfg cr5000_ar8327_pad0_cfg = {
++      .mode = AR8327_PAD_MAC_RGMII,
++      .txclk_delay_en = true,
++      .rxclk_delay_en = true,
++      .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
++      .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
++};
++
++static struct ar8327_led_cfg cr5000_ar8327_led_cfg = {
++      .led_ctrl0 = 0x00000000,
++      .led_ctrl1 = 0xc737c737,
++      .led_ctrl2 = 0x00000000,
++      .led_ctrl3 = 0x00c30c00,
++      .open_drain = true,
++};
++
++static struct ar8327_platform_data cr5000_ar8327_data = {
++      .pad0_cfg = &cr5000_ar8327_pad0_cfg,
++      .port0_cfg = {
++              .force_link = 1,
++              .speed = AR8327_PORT_SPEED_1000,
++              .duplex = 1,
++              .txpause = 1,
++              .rxpause = 1,
++      },
++      .led_cfg = &cr5000_ar8327_led_cfg,
++};
++
++static struct mdio_board_info cr5000_mdio0_info[] = {
++      {
++              .bus_id = "ag71xx-mdio.0",
++              .phy_addr = 0,
++              .platform_data = &cr5000_ar8327_data,
++      },
++};
++
++static void __init cr5000_setup(void)
++{
++      u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++      ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
++      gpio_request_one(CR5000_GPIO_LED_POWER_ENABLE,
++      GPIOF_OUT_INIT_LOW, "Power LED enable");
++      ath79_gpio_output_select(CR5000_GPIO_LED_POWER_AMBER, 
AR934X_GPIO_OUT_GPIO);
++      ath79_gpio_output_select(CR5000_GPIO_LED_WLAN_2G, AR934X_GPIO_OUT_GPIO);
++      ath79_gpio_output_select(CR5000_GPIO_LED_WPS, AR934X_GPIO_OUT_GPIO);
++
++      ath79_register_m25p80(NULL);
++
++      ath79_register_leds_gpio(-1, ARRAY_SIZE(cr5000_leds_gpio),
++                               cr5000_leds_gpio);
++      ath79_register_gpio_keys_polled(-1, CR5000_KEYS_POLL_INTERVAL,
++                                      ARRAY_SIZE(cr5000_gpio_keys),
++                                      cr5000_gpio_keys);
++      ath79_register_usb();
++      ath79_register_wmac(art + CR5000_WMAC_CALDATA_OFFSET, art + 
CR5000_WMAC_MAC_OFFSET;
++      ap94_pci_init(NULL, NULL, NULL, NULL, art + CR5000_PCIE_MAC_OFFSET;
++
++      ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
++                                 AR934X_ETH_CFG_SW_ONLY_MODE);
++
++      ath79_register_mdio(1, 0x0);
++      ath79_register_mdio(0, 0x0);
++
++      ath79_init_mac(ath79_eth0_data.mac_addr, art + CR5000_MAC0_OFFSET, 0);
++
++      mdiobus_register_board_info(cr5000_mdio0_info,
++                                  ARRAY_SIZE(cr5000_mdio0_info));
++
++      /* GMAC0 is connected to an AR8327 switch */
++      ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++      ath79_eth0_data.phy_mask = BIT(0);
++      ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++      ath79_eth0_pll_data.pll_1000 = 0x06000000;
++      ath79_register_eth(0);
++}
++
++MIPS_MACHINE(ATH79_MACH_CR5000, "CR5000", "PowerCloud CR5000",
++           cr5000_setup);
+Index: linux-4.1.3/arch/mips/ath79/machtypes.h
+===================================================================
+--- linux-4.1.3.orig/arch/mips/ath79/machtypes.h
++++ linux-4.1.3/arch/mips/ath79/machtypes.h
+@@ -44,6 +44,7 @@ enum ath79_mach_type {
+       ATH79_MACH_CARAMBOLA2,          /* 8devices Carambola2 */
+       ATH79_MACH_CPE510,              /* TP-LINK CPE510 */
+       ATH79_MACH_CR3000,              /* PowerCloud Systems CR3000 */
++      ATH79_MACH_CR5000,              /* PowerCloud Systems CR5000 */
+       ATH79_MACH_DB120,               /* Atheros DB120 reference board */
+       ATH79_MACH_PB44,                /* Atheros PB44 reference board */
+       ATH79_MACH_DGL_5500_A1,         /* D-link DGL-5500 rev. A1 */
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel

Reply via email to