Sorry meant to cancel after I looked closer.
However, because it looks like it involves a whack of undocumented
variable settings and rather a mess, to be frank, so I doubt I'll get to
it anytime soon if ever because I think it would take way more effort
than I think it's worth (it certainly looks to me like a lot more effort
than the old way, in part because of lack of documentation, and in part
because there's more to write for new oems).
Regards,
Daniel
On 2015-09-07 4:14 PM, Daniel Curran-Dickinson wrote:
On 2015-09-07 3:01 PM, Daniel Dickinson wrote:
On 2015-09-07 8:29 AM, Alexander Couzens wrote:
diff --git a/target/linux/ar71xx/image/Makefile
b/target/linux/ar71xx/image/Makefile index 8f609de..15bb6a3 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
Could you migrate to the new image Makefile format?
Like the tplink wdr4300 is using.
Are you a developer? It looks to me like the tp-link format you mention
is specifically for tp-link devices.
The devices I did are follow the format of every device except those
tp-link devices, and I am not aware of these devices *having* a hardware
id like the tp-link devices, not am I seeing in particular the benefit
of the 'new' format over the old (in fact the new format seems a whole
lot more verbose).
Will look at that, but probably not until next weekend.
IMHO: I'm not sure if we need 2 builds for the devices, when only the
layout is the difference.
When using the nocloud layout is it possible to go back to the OEM
firmware?
No, hence the two builds.
Regards,
Daniel
Best,
lynxis
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
